Baumüller supplier in Romania
For Baumüller we quote DSD servo motors, DS2 synchronous motors, DST2 high-torque motors and b maXX 3300 and 5500 servo drives; we need the full code on the nameplate, the encoder, the cooling type and the mains voltage.
Founded in 1930 · Headquarters: Nuremberg, Germany
Who is Baumüller and what does it make?
Baumüller makes electric drive and automation systems for mechanical engineering: servo motors, synchronous motors for main drives, direct-drive high-torque motors and servo drives from the b maXX series. The range is used on plastics injection moulding machines, extruders, servo presses, printing machines, shredders for recycling and electric propulsion for ships. For a quotation, send us the full code on the motor or drive nameplate and the machine on which it is installed.
DSD servo motors are available in seven sizes, between 28 and 132, with ratings of 0.3–150 kW and rated torques from 0.6 to 715 Nm, in versions without cooling, with air cooling or with liquid cooling. DS2 synchronous motors, with shaft heights of 100–200 mm, reach 300 kW in the water-cooled version, with IP54 protection, while the ventilated version has IP23 or IP54 protection. DST2 high-torque motors come in five sizes, between 135 and 400, with peak torque of up to 31,000 Nm, speeds of up to 2,000 rpm and ratings of up to 530 kW, with solid shaft, hollow shaft or an integrated thrust bearing for extruders.
b maXX 3300 servo drives are for low ratings, up to approximately 5 kW, with the STO function certified to EN ISO 13849 up to PL e. b maXX 5500 covers ratings of up to 315 kW, in seven sizes, with integrated rectifier, intermediate circuit and inverter and water-cooled or through-wall variants. The company has operated in Nuremberg since 1930 and has made motors since 1945. When replacing a motor or a drive, the encoder, the cooling type and the firmware version of the existing drive matter.
What do we supply from the Baumüller range?
| Product | Description |
|---|---|
| DSD servo motors | Servo motors in seven sizes, from 28 to 132, with ratings of 0.3–150 kW and rated torques of 0.6–715 Nm. They are supplied without cooling, with air or liquid cooling, with brake, gearbox and various encoders, with single-cable connection, terminal box or two outputs. |
| DS2 synchronous motors | Three-phase synchronous motors for main drives, with shaft heights of 100–200 mm and ratings of up to 300 kW. There are water-cooled versions, with IP54 protection, and ventilated versions, with IP23 or IP54 protection, used on plastics machines, presses, printing machines and servo pumps. |
| DST2 high-torque motors | Direct-drive motors with many pole pairs, in five sizes, from 135 to 400, with peak torque of up to 31,000 Nm, speeds of up to 2,000 rpm and 530 kW. They have versions with hollow shaft or integrated thrust bearing, for extruders, servo presses and shredders. |
| b maXX 5500 servo drives | Servo drives for ratings of up to 315 kW, in seven sizes, with integrated rectifier, intermediate circuit and inverter. Cooling can be by air, by water in a stainless steel design or through-wall, and together with DST2, DS2 or DA motors they form packages for extruders and blown film lines. |
Why Baumüller?
- Direct drive without a gearbox — DST2 motors deliver up to 31,000 Nm peak torque, with an integrated thrust bearing for the extruder screw
- Water cooling for servo motors — available as standard from size 45 to 132, for high power density in machines with many axes
- High power in a single unit — b maXX 5500 covers drives of up to 315 kW, in seven sizes
- Functional safety — b maXX 3300 has the STO function certified to EN ISO 13849 up to PL e
- Single-cable connection — servo motors can use Hyperface DSL, with power, encoder and temperature in the same hybrid cable
Which Baumüller codes and series are requested most often?
| Code | Description |
|---|---|
| DSD | Synchronous servo motors, sizes 28–132 |
| DS2 | Three-phase synchronous motors for main drives, up to 300 kW |
| DST2 | Direct-drive high-torque motors, up to 31,000 Nm |
| DA | Motors for main drives, used with b maXX 5500 |
| b maXX 3300 | Compact servo drive up to approximately 5 kW |
| b maXX 5300 | Servo drive from the b maXX 5000 series |
| b maXX 5500 | Servo drive for ratings of up to 315 kW |
| b maXX 6500 | Servo drive from the b maXX 6000 series |
| b maXX PLC-MC | Automation controller for b maXX drives |
| b maXX driveplc | Controller integrated in the drive |
| ProDrive | Parameterisation software for b maXX servo drives |
Where is Baumüller equipment used?
- Plastics processing — injection moulding machines, extruders, blown film lines and thermoforming
- Cold forming — eccentric servo presses, bending presses and screw presses
- Printing and paper — drives for printing and paper processing machines
- Recycling — direct drives for shredders
- Marine — electric and diesel-electric propulsion for ships
How do we supply Baumüller in Romania?
We can quote Baumüller DSD servo motors, DS2 synchronous motors, DST2 high-torque motors and b maXX 3300, 5300, 5500 and 6500 servo drives, as well as replacement modules for machines in service. To identify the correct version, send us the full code and the serial number from the nameplate, the encoder and cooling type, the mains voltage and, for drives, the communication cards fitted. We bring in Baumüller motors and drives to order, usually in 1–4 weeks; for large motors configured to order, depending on the specification, the lead time may be longer.
Drive parameterisation and commissioning of the drive on the machine are outside our offer and are handled by the integrator or the machine's service team.
Frequently asked questions about Baumüller
What does Baumüller make?
Baumüller makes DSD servo motors, DS2 synchronous motors for main drives, DST2 direct-drive high-torque motors, b maXX servo drives and automation controllers. The range is used on plastics machines, presses, printing machines, recycling shredders and for the electric propulsion of ships.
How do I choose a Baumüller motor for an extruder?
We start from the torque required at the screw, the speed and the axial force. DST2 motors deliver up to 31,000 Nm peak torque and can have an integrated thrust bearing, so they eliminate the gearbox, while DS2 reaches 300 kW water-cooled. Send us the screw data, the current rating and the cooling type available.
How soon can you supply Baumüller motors and drives?
Supplied to order, the lead time is usually 1–4 weeks; a Baumüller motor or drive can ship in 24–72 h when the item is in stock, locally or at the supplier. For DST2 and DS2 motors configured to order, depending on the specification, the lead time may be longer.
Can I replace an older b maXX servo drive with a new one?
Often yes, but the drive series, the communication cards, the motor encoder and the saved parameters matter. b maXX 3300 is compatible with b maXX 5000 in operating mode, communication and parameter structure. Send us the codes of both devices and a copy of the parameters, if you have one.
What data do I send for a quotation on a Baumüller servo motor?
The full code on the nameplate and the serial number, the motor size, the cooling type (air, water or oil), the brake, the encoder, the connection (single cable, terminal box or two outputs) and the drive that controls it. With these we identify the correct DSD motor.
How do I request a Baumüller quotation?
Send the Baumüller code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Baumüller Nürnberg GmbH (manufacturer documentation)

