BJ-Gear supplier in Romania
For BJ-Gear we quote worm gearboxes from the 35, 42, 52, 61, 79 and 99 series, stainless steel worm gearboxes, linear actuators and screw jacks, motors, brakes, AXO couplings and encoders; the series and the gear ratio are needed.
Founded in 1964 · Headquarters: Skanderborg, Denmark
Who is BJ-Gear and what does it make?
BJ-Gear is a Danish company from Skanderborg, active since 1964, specialised in worm gearboxes and in the components fitted around them: motors, brakes, couplings, encoders and linear actuators. The in-house products carry the name BJ-Series, and the system is modular, with many combinations of housing, flange, shaft, material, oil and surface treatment.
The standard worm gearboxes cover six sizes, from the 35 series, with an aluminium housing, to the 99 series, in cast iron. The gear ratio reaches 100:1 in a single stage, and the output torque rises from 25 Nm on the 35 series to 890 Nm on the 99 series. For more exact positioning there are precision versions with low backlash, below 0.20° on the 42, 52 and 61 series and below 0.15° on the 79 and 99 series. The standard gearboxes are approved for ATEX zones 2 and 22. The stainless steel worm gearboxes come in STANDARD and PREMIUM versions, and alongside them there are stainless steel bevel-helical gearboxes, STRONG series spiral bevel gearboxes and planetary gearboxes.
On the linear motion side, the company offers actuators with worm or belt drive, AISI 304 stainless steel actuators with IP69K protection and screw jacks for heavy loads. The range is completed by aluminium motors, electromagnetic brakes and clutches, incremental and absolute single-turn flange encoders, AXO toothed couplings, water-resistant NG housed bearings, and machined gears and racks. For a correct quotation, what matters is the series, the ratio, the flange size, the shaft diameter and the mounting position.
What do we supply from the BJ-Gear range?
| Product | Description |
|---|---|
| Cast iron and aluminium worm gearboxes | Series 35, 42, 52, 61, 79 and 99, with gear ratios between 5:1 and 100:1 and output torque from 25 to 890 Nm. Series 35 has an aluminium housing, the rest are cast iron. Precision versions with low backlash are also available. |
| Stainless steel worm gearboxes | The stainless steel range has two versions, STANDARD and PREMIUM. Alongside them there are stainless steel bevel-helical gearboxes, STRONG spiral bevel gearboxes and planetary gearboxes. |
| Linear actuators and screw jacks | Actuators with worm or belt drive, the AISI 304 stainless steel actuator with IP69K protection and worm screw jacks for linear movements with heavy loads. They are completed with aluminium motors, attached or supplied separately. |
| Brakes, clutches, encoders and AXO couplings | Aluminium electromagnetic brakes and clutches, incremental and absolute single-turn flange encoders and in-house AXO toothed couplings. They are mounted directly on the gearbox or actuator of the same family. |
Why BJ-Gear?
- Six worm gearbox sizes, from the 35 series to the 99 series — the output torque matches the motor and the machine load step by step
- Precision versions with backlash below 0.20° or below 0.15° — for rotary tables, positioning and mechanisms that do not tolerate play when the direction reverses
- Stainless steel worm gearboxes and an AISI 304 stainless steel actuator with IP69K protection — for areas where the equipment is washed down
- Standard gearboxes approved for ATEX zones 2 and 22 — useful in installations with dust or a potentially explosive atmosphere
- Motor, brake, encoder and coupling supplied together with the gearbox — a single drive assembly can be requested in one quotation
Which BJ-Gear codes and series are requested most often?
| Code | Description |
|---|---|
| Series 35 | Worm gearbox with aluminium housing, ratios 5:1–90:1, output torque 25 Nm |
| Series 42 | Cast iron worm gearbox, ratios 5:1–75:1, output torque 50 Nm |
| Series 52 | Cast iron worm gearbox, ratios 7:1–60:1, output torque 130 Nm |
| Series 61 | Cast iron worm gearbox, ratios 7:1–100:1, output torque 200 Nm |
| Series 79 | Cast iron worm gearbox, ratios 7:1–60:1, output torque 300 Nm |
| Series 99 | Cast iron worm gearbox, ratios 7:1–100:1, output torque 890 Nm |
| STANDARD stainless steel | Stainless steel worm gearbox |
| PREMIUM stainless steel | Stainless steel worm gearbox, second version |
| STRONG | Spiral bevel gearbox |
| AXO | In-house toothed coupling |
| NG | Housed bearing, water-resistant, for the food industry |
| BJ-Series | Name of the in-house products, in a modular system |
Where is BJ-Gear equipment used?
- Food industry — NG housed bearings and stainless steel components, with an IP69K actuator
- High-ratio drives — worm gearboxes with a ratio of up to 100:1 in a single stage
- Positioning — precision gearboxes with low backlash, and encoders
- Installations with dust or a potentially explosive atmosphere — gearboxes for ATEX zones 2 and 22
- Lifting and position adjustment — screw jacks and linear actuators
How do we supply BJ-Gear in Romania?
We can quote BJ-Gear worm gearboxes from the 35–99 series, the stainless steel versions, linear actuators, screw jacks, motors, brakes, couplings and encoders. For a correct quotation we need the series and size from the nameplate, the gear ratio, the flange and shaft type, the mounting position and, for actuators, the stroke and the load. To replace an existing gearbox, send a photograph of the nameplate and the connection dimensions. BJ-Gear gearboxes and components are supplied to order, usually in 1–4 weeks; items can ship in 24–72 h when the item is in stock, locally or at the supplier. The exact lead time is stated in the quotation.
Before proposing a BJ-Gear series for an existing gearbox, we check the connection dimensions and the gear ratio in the quotation.
Frequently asked questions about BJ-Gear
What does BJ-Gear make besides worm gearboxes?
BJ-Gear of Skanderborg makes cast iron, aluminium and stainless steel worm gearboxes, bevel and bevel-helical gearboxes, linear actuators, screw jacks, AXO couplings and machined gears; the assemblies can be supplied with aluminium motors, electromagnetic brakes and clutches and flange encoders.
How do I choose the right series, from 35 to 99?
The choice starts from the output torque required and the gear ratio. Series 35 gives 25 Nm, and series 99 reaches 890 Nm, with ratios up to 100:1. Send us the torque, the motor speed and the duty cycle, and we check the series that fits.
Do you have low-backlash gearboxes for positioning?
Yes, for the 42, 52, 61, 79 and 99 series there are precision versions, with backlash below 0.20° on the first three and below 0.15° on the last two. For a quotation we need the series wanted, the ratio and the backlash angle your application accepts.
Do you supply BJ-Gear in Romania, and how soon?
BJ-Gear gearboxes are ordered, usually in 1–4 weeks. Items can ship in 24–72 h when the item is in stock, locally or at the supplier. For special configurations, depending on the specification, the lead time can be longer; we confirm it in the quotation.
What data should I give for a BJ-Gear linear actuator with worm or belt drive, including the stainless steel IP69K version?
The drive type wanted, that is worm or belt, the load, the stroke, the travel speed, the motor voltage and the working environment. For the AISI 304 stainless steel version with IP69K protection, state it in the request; we confirm in the quotation what fits.
How do I request a BJ-Gear quotation?
Send the BJ-Gear code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: BJ-Gear A/S (manufacturer documentation)

