Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Buschjost Magnetventile supplier in Romania

For Buschjost Magnetventile we offer solenoid valves 27-04, 35-08 and 46-08, pneumatically operated valves 63-11 and F22 and ball valves; we need the code from the nameplate, the fluid, pressure, temperature and coil voltage.

Founded in 1998 · Headquarters: Vlotho, Germany

Request a quote

Who is Buschjost Magnetventile and what does it make?

Buschjost Magnetventile GmbH & Co. KG is a German manufacturer of solenoid valves and pneumatically operated valves for gases and liquids in pressurised pipelines, with its headquarters and production in Vlotho-Exter. The company was founded in December 1998 in Bad Oeynhausen, moved to Vlotho in the first half of 1999 and since 2020 has worked on a production area of 4,000 m². The range includes forced-lift, servo-assisted and direct-acting solenoid valves, externally actuated valves, ball valves, motorised valves, filters and coils. For a quotation, send us the series code from the valve, of the form 27-04 or 46-08, the connection and the coil voltage.

Forced-lift solenoid valves combine the servo-assisted principle with the direct one and work from 0 bar: the 27-04 series, in grey cast iron PN16, DN15–DN50, covers 0–16 bar, while 35-08, in AISI 316 Ti stainless steel with G1/4–G2 connections, reaches 40 bar. For servo-assisted solenoid valves the minimum pressure difference is specified first: 28-04 works at 0.5–16 bar, 46-08 at 1–100 bar, and 2/529-0815 up to 450 bar. For pressures above 40 bar absolute there are versions with special housings and seals for oxygen, CO2, hydrogen, methane and air, with a limit of 1,050 bar overpressure.

Cryogenic versions work down to −200 °C, with a normally closed or normally open safe position, and for hot fluids there are valves for +110…+300 °C; externally actuated valves reach +400 °C. Pneumatically operated valves use the compressed air already in the installation: 63-11, in CC499K bronze, and 63-08, in AISI 316, work at 0–16 and 0–40 bar respectively, while F22 and 79-04, with flanges, cover diameters up to DN250. The valves are found in energy, chemicals and pharmaceuticals, petrochemicals, the food and beverage industry, gas processing and paper manufacturing.

What do we supply from the Buschjost Magnetventile range?

ProductDescription
Forced-lift solenoid valves (27-04, 35-08, 24-08)Electrically operated seat valves that work from 0 bar: 27-04 in grey cast iron PN16, DN15–DN50, up to 16 bar; 35-08 in AISI 316 Ti, with G1/4–G2 connections, up to 40 bar; 24-08 in AISI 316, DN50–DN150, also up to 40 bar, for large-diameter process pipelines.
Servo-assisted solenoid valves (28-04, 46-08, 2/529-0815)Valves that use the fluid pressure to open and need a minimum pressure difference: 28-04 in PN16 cast iron at 0.5–16 bar, 51-10 in brass at 0.5–40 bar, 46-08 in AISI 316 Ti at 1–100 bar and 2/529-0815 at 1–450 bar; the 46-CRYO version covers 1–65 bar.
Pneumatically operated valves (63-11, 63-08, 78-08, F22)Seat valves operated directly by control air: 63-11 in CC499K bronze and 63-08 in AISI 316, with G1/2–G2 connections, at 0–16 and 0–40 bar; 78-08 in AISI 316 Ti up to 40 bar; F22 and 79-04, with cast iron flanges, for DN15–DN250 at 0–16 bar.
Ball valves and motorised valvesLever-operated ball valves, with a single- or double-acting pneumatic actuator or an electric actuator, with threaded connection or flanges; the bored ball rotates through 90° in plain bushings, and the extended-stem versions go down to −200 °C. The range is completed by motorised valves, filters and replacement coils.

Why Buschjost Magnetventile?

  • Three electric actuation principles — forced-lift, servo-assisted and direct, chosen according to the pressure difference in the installation
  • Versions for pressures above 40 bar absolute — oxygen, CO2, hydrogen, methane and compressed air
  • Cryogenic variants down to −200 °C and valves for +110…+300 °C — the valve is chosen by fluid temperature, not only by diameter
  • Pneumatically operated valves 63-11, 63-08 and F22 — actuation with the existing compressed air, from a G1/2 connection to a DN250 flange
  • Bodies in brass, bronze, grey and ductile cast iron, cast steel and AISI 316 Ti stainless steel — the material follows the fluid and the nominal pressure

Which Buschjost Magnetventile codes and series are requested most often?

CodeDescription
27-04Forced-lift solenoid valve, grey cast iron PN16, DN15–DN50, 0–16 bar
37-04Forced-lift solenoid valve, grey cast iron PN16, DN20–DN50, 0–16 bar
D24-04Forced-lift solenoid valve, grey cast iron PN16, DN65–DN150
35-08Forced-lift solenoid valve, AISI 316 Ti, G1/4–G2, 0–40 bar
24-08Forced-lift solenoid valve, AISI 316, DN50–DN150, 0–40 bar
28-04Servo-assisted solenoid valve, grey cast iron PN16, DN20–DN50, 0.5–16 bar
51-10Servo-assisted solenoid valve, brass, G1/4–G2, 0.5–40 bar
46-08Servo-assisted solenoid valve, AISI 316 Ti, G1/4–G1/2, 1–100 bar
46-CRYOServo-assisted solenoid valve in cryogenic version, 1–65 bar
2/529-0815Servo-assisted solenoid valve, AISI 316 Ti, 1–450 bar
63-11Directly pneumatically operated valve, CC499K bronze, G1/2–G2, 0–16 bar
63-08Directly pneumatically operated valve, AISI 316, G1/2–G2, 0–40 bar
78-08Directly pneumatically operated valve, AISI 316 Ti, G1/2–G2, 0–40 bar
F22Pneumatically operated valve, grey or ductile cast iron, DN20–DN250, 0–16 bar
79-04Pneumatically operated valve, grey cast iron PN16, DN15–DN150

Where is Buschjost Magnetventile equipment used?

  • Energy — valves for high pressures and temperatures on process pipelines
  • Chemicals and pharmaceuticals — AISI 316 Ti stainless steel solenoid valves
  • Petrochemicals and gas processing — versions for hydrogen, methane and pressures above 40 bar
  • Food and beverage industry — cryogenic valves for liquefied gases
  • Paper manufacturing — solenoid valves and pneumatically operated valves on process circuits

How do we supply Buschjost Magnetventile in Romania?

We can quote Buschjost Magnetventile solenoid valves, pneumatically operated valves and ball valves, as well as coils and spare parts for valves already installed. For a reliable identification, send us the full code from the valve nameplate, for example 27-04 or 46-08 followed by the diameter, the fluid, the minimum and maximum working pressure, the fluid temperature, and the coil voltage and frequency. We supply the valves to order, usually in 1–4 weeks; an item can ship in 24–72 h when the item is in stock, locally or at the supplier. For cryogenic versions or very high pressures, depending on the specification, the lead time can be longer.

We quote the valves and their parts by the code on the nameplate and the process data; pipeline installation and commissioning are outside our offer and stay with your maintenance team.

Frequently asked questions about Buschjost Magnetventile

What does Buschjost Magnetventile of Vlotho make?

The company in Vlotho-Exter makes solenoid valves and pneumatically operated valves for gases and liquids under pressure: forced-lift, servo-assisted and direct-acting solenoid valves, externally actuated valves, manual, pneumatic and electric ball valves, motorised valves, filters and coils. The range includes cryogenic versions, versions for high temperatures and versions for pressures above 40 bar.

How do I choose between a servo-assisted and a forced-lift solenoid valve?

A servo-assisted solenoid valve needs a minimum pressure difference between inlet and outlet, for example 0.5 bar for the 28-04 series or 1 bar for 46-08. If the installation also works without a pressure difference, choose a forced-lift version, such as 27-04 or 35-08, which works from 0 bar. Send us the minimum and maximum pressure, the fluid and the diameter.

How quickly do you supply Buschjost Magnetventile solenoid valves in Romania?

We supply standard valves to order, usually in 1–4 weeks, and a coil or a valve can ship in 24–72 h when the item is in stock, locally or at the supplier. For cryogenic valves, valves for over 100 bar or versions in special materials, depending on the specification, the lead time can be longer; we confirm it in the quotation.

I have a valve marked Buschjost with a long code made of digits and dots. Is it from the Vlotho range?

The series of the Vlotho company have short codes with a hyphen, of the form 27-04, 46-08 or 63-11, or codes such as 2/529-0815. Long numeric codes with dots, of the type 8240200.9101, do not belong to the Vlotho range. Send us a photo of the nameplate, and we identify the manufacturer and the correct item.

What data should I send for a Buschjost Magnetventile solenoid valve quotation?

The full code from the nameplate, the nominal diameter or connection (G, NPT, flange), the fluid, the minimum and maximum pressure, the temperature of the fluid and of the environment, the coil voltage and frequency, the normally closed or normally open position and the desired body material, for example brass, cast iron or AISI 316 Ti stainless steel. For oxygen or hydrogen, state the fluid explicitly.

How do I request a Buschjost Magnetventile quotation?

Send the Buschjost Magnetventile code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Buschjost Magnetventile GmbH & Co. KG (manufacturer documentation)