Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Crotti Valvole supplier in Romania

For Crotti Valvole we quote wafer, split wafer, split body, trunnion, three-way and DBB ball valves; we need the type, DN, pressure class, body material and the safety requirements of the line.

Headquarters: Nova Milanese, Italy

Request a quote

Who is Crotti Valvole and what does it make?

Crotti Valvole is an Italian manufacturer of industrial ball valves, based in Nova Milanese, where quality control is also carried out. The range has five families: wafer and split wafer, split body, trunnion (with the ball held on stems), three-way and DBB (double block and bleed, that is, double isolation with a bleed between the two seats). The bodies are machined from bar up to DN 100 (4 inch), and above this size forgings are used, in carbon steel or stainless steel.

The construction is described by precise standards: design according to EN 12516 and ASME B16.34, compliance with the applicable directives specified in the manufacturer's documentation, EN 1092-1 or ANSI B16.5 flanges, ISO 5211 mounting flange for the actuator, tests according to EN 12266-1, ISO 5208 and API 598. The seat seals are made of PTFE or RPTFE with 25 % carbon graphite, the ball and stem of AISI 316 or 316L stainless steel, and the body seals of Viton O-rings and graphite. The recommended temperature is from −29 to +150 °C; with special materials and seals, the limits reach −101 and +500 °C on the trunnion and split body models.

In maintenance and design, the interest lies in the safety details: the anti-blowout stem, the antistatic device according to BS 5146, the fire-safe design (API 6FA, API 607, ISO 10497), fugitive emissions according to ISO 15848 (TA-Luft), variants for explosion-risk areas and with functional safety, according to the manufacturer's documentation. These characteristics matter on process lines, in refineries, in chemicals and in gas installations, where the valve must match the design. Optionally there is a stem extension for insulation, a heating jacket, a gear operator, and pneumatic or electric actuators.

What do we supply from the Crotti Valvole range?

ProductDescription
Wafer and Split WaferFloating ball valves, bidirectional, full bore, in a wafer or split wafer body. The body and the closure are made from bar up to DN 100; the recommended temperature is between −29 and +150 °C, with options from −46 to +200 °C.
Split BodyTwo-piece floating ball valves, full or reduced bore, with RF or RTJ flanged ends or with THD/WE variants: butt weld, socket weld or threaded. They are designed according to EN 12516, ISO 17292 and API 6D.
TrunnionBall valves with the ball held on stems, bidirectional, full bore (art. 90) or reduced bore (art. 95). The seats have a metal ring with a DEVLON or RPTFE insert, and the functions include DBB, SPE and self-relieving. The flanges are RF or RTJ, or the ends are for welding.
Three-way and DBBThe three-way valve has an L or T ball, with full or reduced bore. The DBB valve has two balls, floating or on stems, and there is also the SBB (single block and bleed) version, with a single ball and a bleed.

Why Crotti Valvole?

  • Five families of ball valves — wafer, split wafer, split body, trunnion, three-way and DBB, so a replacement request can be covered within the same range
  • Bodies from bar up to DN 100 and forged above this size — carbon steel or stainless steel, with AISI 316/316L trim
  • Safety declared in the design — fire-safe designs according to the manufacturer's documentation, variants for explosion-risk areas and with functional safety, according to the manufacturer's documentation, and ISO 15848 fugitive emissions
  • Trunnion variants with DBB, SPE and self-relieving functions — for lines that require double isolation or automatic relief of cavity pressure
  • Material and temperature options — nickel, duplex, super duplex and titanium on request, with limits down to −101 and up to +500 °C on the indicated models

Which Crotti Valvole codes and series are requested most often?

CodeDescription
WaferFloating ball valve, full bore, wafer body
Split WaferFloating ball valve, two-piece wafer-type body
Split BodyTwo-piece floating ball valve, flanged
Split Body THD/WEVariant with threaded or weld ends
Trunnion art. 90Trunnion ball valve, full bore
Trunnion art. 95Trunnion ball valve, reduced bore
Three Way LThree-way valve, L ball
Three Way TThree-way valve, T ball
DBBTwo-ball valve, double isolation with bleed
SBBSingle-ball valve, single isolation with bleed
DIB 1Double isolation and bleed function, type 1
DIB 2Double isolation and bleed function, type 2

Where is Crotti Valvole equipment used?

  • Chemicals and oil — trunnion and DBB valves on process lines with fugitive emission requirements
  • Pharmaceutical industry — AISI 316/316L stainless steel bodies and trim
  • Installations with an explosive atmosphere — ATEX zone II 2GD and fire-safe design
  • Lines with functional safety requirements — valves in functional safety variants
  • Industrial maintenance — replacing wafer or flanged ball valves on existing lines

How do we supply Crotti Valvole in Romania?

From the Crotti Valvole range we can quote wafer, split wafer, split body, trunnion, three-way and DBB ball valves. We supply them to order, usually in 1–4 weeks; a standard valve can ship in 24–72 h when the item is in stock, locally or at the supplier, while designs with special materials need a longer lead time. For a quotation, send the valve type, DN or the size in inches, the pressure class, the end type, the body material, the fluid, the temperature and any ATEX, fire-safe or fugitive emission requirements. We confirm the exact lead time in the quotation.

The pressure class of a variant is established on the basis of the DN, the end type, the body material and the working temperature.

Frequently asked questions about Crotti Valvole

What kind of valves does Crotti Valvole make?

Crotti Valvole makes ball valves in carbon steel and stainless steel, in five families: wafer and split wafer, split body, trunnion, three-way and DBB. The bodies are machined from bar up to DN 100 and forged above this size, with special material options on request.

How do I choose between a floating ball valve and a trunnion one?

With a floating ball, the pressure pushes it onto the downstream seat; with a trunnion-mounted ball, the force is taken by the stems, and the model can have DBB, SPE or self-relieving functions. The family is chosen according to the DN, the pressure class and the function the line requires; send us the data and we propose the variant.

How long does it take to bring a Crotti valve to Romania?

Supplied to order, usually in 1–4 weeks. A standard valve can ship in 24–72 h when the item is in stock, locally or at the supplier. Valves with special materials, with fugitive emission requirements or with an actuator need a longer lead time; we set it in the quotation, after checking the configuration.

Can I replace an old wafer ball valve with a Crotti one?

It is possible once we have checked the face-to-face distance, the flange standard (EN 1092-1 or ANSI B16.5), the pressure class and the body material. Send the nameplate or a photo of the old valve, the installation dimensions and the working conditions, and we determine whether a Crotti variant fits.

What details do you need for a quotation on a Crotti ball valve?

Specify the desired family, DN or inches, the pressure class, the end type (RF or RTJ flanges, weld or thread), the body and trim material, the fluid, the pressure and the temperature. Add any ATEX, fire-safe, SIL or fugitive emission requirements and whether the valve is supplied with an actuator.

How do I request a Crotti Valvole quotation?

Send the Crotti Valvole code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Crotti Valvole srl (manufacturer documentation)