Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Duktus supplier in Romania

For Duktus we quote ductile iron pipes to EN 545 and EN 598, fittings with BLS, BRS, TYTON, SMU and STB joints and valves, based on the bill of materials, the diameters and the working pressure.

Request a quote

Who is Duktus and what does it make?

Duktus is a German manufacturer of ductile iron pipe systems for water supply, sewerage and industrial applications, with production in Wetzlar. Cast iron pipes have been made there since 1901. The programme covers pipes, fittings and valves, plus the jointing techniques that link the parts into one system: the BLS® universal joint, used on high-pressure pipelines, the BRS® joint, the TYTON® sleeve, SMU screw-type sleeves and STB sleeves with compression nut, as well as flanged joints. Ductile iron pipes also suit unstable ground.

For drinking water the pipes follow EN 545, and for wastewater EN 598. The external protection is chosen by the aggressiveness of the soil: ZIPOX, with zinc and epoxy resin, is the standard protection, ZIPOX-PLUS uses a zinc-aluminium alloy, DUCPUR has an improved coating, and for very aggressive soils or stray currents there are reinforced coatings such as ECOPUR, ECOCEM and CEMPUR. Fittings receive as standard a 250 µm epoxy coating, inside and outside, blue for drinking water and red-brown for wastewater. The diameter range starts at DN 80 and reaches DN 1000, and the HYDROTIGHT joint works at 25 bar in the DN 80–400 range.

Such systems are installed in water supply and sewerage networks, at pumping and treatment stations, on transmission pipelines over unstable ground and in publicly funded projects, where the documentation requires compliance with EN 545 or EN 598. The choice depends on diameter, pressure, the aggressiveness of the soil and the type of joint, which is why the quotation starts from the project's bill of materials or from the codes in the bill of quantities.

What do we supply from the Duktus range?

ProductDescription
Ductile iron pipes for drinking waterPipes to EN 545, in versions with ZIPOX, ZIPOX-PLUS, DUCPUR, ECOPUR, ECOCEM and CEMPUR external protection, from DN 80 up to DN 1000, for water supply networks and transmission pipelines.
Pipes for wastewaterDuctile iron pipes to EN 598 for sewerage and pressure mains, with ZIPOX, ZIPOX-PLUS or DUCPUR protection for wastewater, used in drainage networks and at pumping stations.
Ductile iron fittingsDuctile iron fittings for drinking water, wastewater and industrial applications, with BLS®, BRS®, TYTON®, SMU, STB or flanged joints and a 250 µm epoxy coating inside and outside.
BLS®, BRS® and HYDROTIGHT jointing systemsBLS® is the universal joint for high-pressure pipelines, BRS® is another jointing technology in the programme, and HYDROTIGHT works at 25 bar for diameters between DN 80 and DN 400.

Why Duktus?

  • Ductile iron pipelines for drinking water (EN 545) and wastewater (EN 598) — the same material, the same joint system for both applications
  • Multiple joints — BLS® for high pressure, BRS®, TYTON®, SMU, STB and flanges, to suit the ground and the existing system
  • Protection chosen by soil — ZIPOX and ZIPOX-PLUS, DUCPUR, ECOPUR, ECOCEM and CEMPUR, including for aggressive soils and stray currents
  • Fittings with a 250 µm epoxy coating — inside and outside, in line with the requirements of the GSK RAL quality mark, blue for drinking water and red-brown for wastewater
  • Diameters from DN 80 to DN 1000 — with the 25 bar HYDROTIGHT joint in the DN 80–400 range

Which Duktus codes and series are requested most often?

CodeDescription
BLS®Universal joint for high-pressure pipelines
BRS®Joint for pipes and fittings
TYTON®Sleeve for pipes, DN 80–1000
HYDROTIGHTJoint for 25 bar, DN 80–400
SMUScrew-type sleeve
STBSleeve with compression nut
ZIPOXExternal protection with zinc and epoxy resin
ZIPOX-PLUSExternal protection with zinc-aluminium alloy, 400 g/m²
DUCPURImproved external protection, for water and wastewater
ECOPURReinforced coating to EN 545/598 for aggressive soils
ECOCEMReinforced coating to EN 545/598 for aggressive soils
CEMPURReinforced coating to EN 545/598

Where is Duktus equipment used?

  • Drinking water supply — networks, transmission pipelines and pumping stations
  • Sewerage and treatment — pipes for wastewater and pressure mains
  • Gas supply — ductile iron pipes for gas networks
  • Biogas plants — ductile iron valves with epoxy coating
  • Industrial applications — flanged fittings for process water pipelines

How do we supply Duktus in Romania?

We can quote Duktus ductile iron pipe systems: pipes for drinking water and wastewater, fittings and valves, supplied to order. Supply to order usually takes 1–4 weeks, longer for large quantities and diameters, and the exact lead time is confirmed in the quotation. For a correct quotation, send us the bill of materials or the bill of quantities with the nominal diameters, the lengths, the working pressure, the type of joint wanted (BLS, TYTON, flanges), the type of external protection, the medium conveyed and the standard required by the project (EN 545 or EN 598).

The compatibility of a joint with an existing pipeline is established from the outside diameter, the type of sleeve and the standard of the installed pipe.

Frequently asked questions about Duktus

What does Duktus make?

Duktus makes ductile iron pipe systems, mainly in Wetzlar: pipes for drinking water and wastewater, fittings and valves, plus the BLS®, BRS® and TYTON® joints. Cast iron pipes have been made there since 1901, and the systems are used in water supply, sewerage and industrial applications.

How do I choose between the BLS, TYTON and flanged joint?

BLS® is the universal joint, used on high-pressure pipelines; TYTON® is the sleeve for diameters from DN 80 to DN 1000, and flanged joints are used to connect to valves and other equipment. Send us the pressure, the diameter and the type of ground.

Do you supply Duktus products in Romania, and within what time?

Duktus pipes are supplied to order, usually in 1–4 weeks. For large quantities and large diameters, depending on the specification, the lead time can be longer; fittings or parts can ship in 24–72 h when the item is in stock, locally or at the supplier. The lead time is set in the quotation, from the bill of materials.

How do I choose the external protection of the pipe (ZIPOX, DUCPUR, ECOPUR)?

The protection is chosen by the aggressiveness of the soil: ZIPOX as standard protection, ZIPOX-PLUS with a zinc-aluminium alloy, DUCPUR for an improved coating, and ECOPUR, ECOCEM or CEMPUR for very aggressive soils or stray currents. Tell us the geotechnical data in the project.

What data do I need to send for a Duktus pipeline quotation?

Send the bill of materials or the bill of quantities, with the nominal diameters, the lengths, the working pressure, the type of joint, the external protection, the type of fluid (drinking water, wastewater, gas) and the standard required, EN 545 or EN 598. For spare parts, add the type of sleeve installed.

How do I request a Duktus quotation?

Send the Duktus code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: VONROLL HYDRO (manufacturer documentation)