DeltaValve supplier in Romania
For DeltaValve we quote bottom and top unheading valves for the coke drum, 6–36 inch isolation valves, CenterFeed devices, cutting tools and transition spools, based on the plant drawing and the process data.
Headquarters: Sandy, Utah, USA
Who is DeltaValve and what does it make?
DeltaValve is an American manufacturer based in Sandy, Utah, which designs and makes equipment for delayed coking units in refineries. Delayed coking is the process in which the heavy residue is heated and deposits as coke in large drums; at the end of the cycle, the drum has to be opened (unheading) at the bottom and, often, at the top, so that the coke can be cut with a water jet and removed. The operation is difficult and dangerous, and DeltaValve products carry it out in a closed system, operated remotely.
The range starts from the automatic bottom drum unheading valve, with a patented dynamic seat, steam-purged and hydraulically or electrically actuated, and from the corresponding top valve, mounted directly on the top flange of the drum, in 30 and 36 inch sizes. Alongside them, the company makes the CenterFeed injection device, which combines side entry of the feed with the effect of central feed through the bottom, top-entry isolation valves, repairable in line (from 6 to 36 inches, classes 150–900), cutting tools with automatic switching between drilling and cutting, cutting tool enclosures, the DeltaGlide system for supporting the bottom valve and transition spools between the drum and the valve.
For refineries in Romania that operate or upgrade a delayed coking unit, this equipment is relevant at planned shutdowns and when replacing isolation valves, where the pressure class, the body and seat materials, the actuation type and the ASME and API standards matter. The quotation starts from the process datasheet and the data of the installed valve.
What do we supply from the DeltaValve range?
| Product | Description |
|---|---|
| Automatic bottom drum unheading valve | Permanently connected to the bottom flange of the drum (60 inches standard), it forms a closed system as far as the coke pit. Built according to ASME section VIII, with an ASME SA217 Gr. C5 body, single-piston hydraulic actuation or electric actuation with a planetary roller screw. |
| Automatic top unheading valve | Mounted directly on the top flange of the drum, in 30 and 36 inch sizes, with a process temperature of 482 °C at the seat and gate and steam purging. It removes the need for operators on the cutting deck during unheading. |
| Isolation valves for coking | Top-entry gate valves, with product retention plates in the gate port and self-cleaning metal seats, from 6 to 36 inches, classes 150–900, with electric, hydraulic or manual actuation and a design compliant with ASME B16.34 and API 600. |
| CenterFeed, cutting tools and transition spools | The CenterFeed device allows side entry with a central feed effect. The automatic switching cutting tools, their enclosures, the DeltaGlide system and the transition spools complete the drum equipment, all sized to the plant specifications. |
Why DeltaValve?
- Closed drum unheading system — the bottom and top valves are operated remotely, from a single button, with steam purging and double sealing
- Patented dynamic seat — the bottom valve is permanently connected to the coke drum, has a standard 60 inch flange and hydraulic or planetary roller screw actuation
- In-line repairable isolation valves — top entry, self-cleaning metal seats, 6–36 inches (150–900 mm), classes 150, 300, 600 and 900
- CenterFeed device — side feed with a central flow channel into the drum, which reduces wall stresses and lid eruptions
- Remotely switched cutting tool — switching between the drilling and cutting modes without removing the tool from the drum, tested at cutting pressures of up to 2000 psi
Which DeltaValve codes and series are requested most often?
| Code | Description |
|---|---|
| Bottom Unheading Valve | Automatic bottom unheading valve for the coke drum, 60 inch flange |
| Top Unheading Valve 30 | Automatic top unheading valve, 30 inch |
| Top Unheading Valve 36 | Automatic top unheading valve, 36 inch |
| CenterFeed | Injection device with side entry and central feed |
| Isolation Valve CL150 | Isolation valve for coking, 6–36 inches, class 150 |
| Isolation Valve CL300 | Isolation valve for coking, class 300 |
| Isolation Valve CL600 | Isolation valve for coking, class 600 |
| Isolation Valve CL900 | Isolation valve for coking, class 900 |
| Auto-Switch Cutting Tool | Cutting tool with remote switching between drilling and cutting |
| Cutting Tool Enclosure | Cutting tool enclosure and lid eruption deflector |
| DeltaGlide | Support and maintenance system for the bottom valve |
| Transition Spool | Transition spool between the drum and the unheading valve |
Where is DeltaValve equipment used?
- Refineries — delayed coking units, bottom unheading of coke drums
- Refineries — top unheading and hydraulic cutting of coke
- Refineries — feeding the drums through central injection devices
- Plants with fouling media — isolation valves for high temperatures
How do we supply DeltaValve in Romania?
We can quote DeltaValve equipment for delayed coking units: drum unheading valves, isolation valves, CenterFeed devices, cutting tools and transition spools, supplying them to order. The equipment is designed to the plant specification, so the lead time is set in the quotation and, depending on the specification, may exceed the usual 1–4 weeks. For a correct quotation, send us the diameter of the drum and of the flange, the pressure class, the process temperature, the materials required, the actuation type (hydraulic or electric), the drawing of the installed valve and, if available, the serial number.
The configuration of a drum unheading valve is determined from the plant drawing, and the lead time for equipment designed to specification is set on request.
Frequently asked questions about DeltaValve
What does DeltaValve make?
DeltaValve makes equipment for delayed coking units: automatic bottom and top unheading valves for the coke drum, the CenterFeed injection device, isolation valves, automatic switching cutting tools, enclosures and transition spools. The headquarters are in Sandy, in the state of Utah.
How do I choose between the bottom unheading valve and the top unheading valve?
The bottom valve connects to the bottom flange of the drum (60 inches standard) and guides the coke towards the pit, while the top valve is mounted on the top flange, in 30 or 36 inches, and protects the personnel on the cutting deck. The two usually work together; send us the flange dimensions.
Can you bring DeltaValve equipment to Romania, and within what lead time?
DeltaValve equipment is sourced to order, to the specification of each plant. The lead time is confirmed in the quotation; for complex configurations, depending on the specification, it may exceed 1–4 weeks, and items can ship in 24–72 h when the item is in stock, locally or at the supplier.
Can I replace an old isolation valve with a DeltaValve isolation valve?
It is checked by pressure class, diameter, face-to-face length, body materials and actuation type. The DeltaValve valve has top entry and can be repaired in line, so the free space above matters as well. We confirm compatibility after comparing the data.
What data should I send for a quotation on a drum unheading valve?
Send the diameter and class of the drum flange, the process temperature and pressure, the materials required, the actuation type (hydraulic or electric), the standards required by the plant and the drawing or serial number of the existing valve. For isolation valves, add the diameter and pressure class.
How do I request a DeltaValve quotation?
Send the DeltaValve code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: DeltaValve, LLC (manufacturer documentation)

