Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Crane supplier in Romania

Valves for oil, gas and energy

Headquarters: The Woodlands, Texas, USA

Request a quote

Who is Crane and what does it make?

Crane, through its Crane ChemPharma & Energy division, is an American industrial valve group with a history of over 170 years, bringing together under one roof specialised brands such as XOMOX (sleeved plug valves, Tufline series), SAUNDERS (diaphragm valves), CENTER LINE and FLOWSEAL (butterfly valves), KROMBACH (ball valves), DEPA (diaphragm pumps) and ELRO (peristaltic pumps). For the Romanian market, Crane means access to a very wide range of industrial valves and pumps, each brand covering a different technical niche.

What sets Crane apart is the specialisation of each component brand: XOMOX Tufline valves come in Full Port, Multiport, Lined, Jacketed, Severe Service or Tertiary Top Seal variants, for media from standard to extremely aggressive, while SAUNDERS diaphragm valves cover the DN008-DN350 range in types A and KB, with seal materials such as neoprene, nitrile, natural rubber or Hypalon. The range has TA-Luft 2021 compliance for emissions and ISO 15848-1 for fugitive sealing — relevant for chemical and petrochemical installations with strict environmental requirements.

Crane suits installations in chemicals, petrochemicals, refineries or pharmaceuticals, where choosing the exact valve type (sleeved valve for abrasive media, diaphragm for complete isolation, butterfly for limited space) depends on the properties of the fluid and the sealing requirements of the process.

What do we supply from the Crane range?

ProductDescription
XOMOX Tufline Sleeved Plug ValvesA family of plug valves with an elastomer sleeve, in Full Port (maximum flow), XP, Multiport (several ways on the same body), Lined (lined for corrosive media), Jacketed (with a heating/cooling jacket) and Severe Service or Tertiary Top Seal variants for extremely aggressive media, including hydrofluoric acid. Recommended where sealing on shut-off matters more than actuation speed.
SAUNDERS Diaphragm ValvesDiaphragm valves in types A (DN008-DN350) and KB (DN015-DN350), with seal materials available in neoprene, nitrile, natural rubber (Q and AA) or Hypalon 237, chosen according to chemical compatibility with the fluid. Recommended for complete isolation of the process medium from the valve mechanism, typical in the chemical and pharmaceutical industries.
DEPA Diaphragm Pumps and ELRO Peristaltic PumpsDEPA air-operated diaphragm pumps and ELRO peristaltic pumps; the suitable model is chosen according to the fluid, from the manufacturer's documentation. They complement the Crane valve range with pumping solutions for the same chemical and pharmaceutical industries.
CENTER LINE and FLOWSEAL Butterfly ValvesButterfly valves from the Crane portfolio, used for isolation and flow regulation in spaces where a gate or diaphragm valve would be too large. CENTER LINE and FLOWSEAL cover general industrial applications, completing the process valve range alongside the XOMOX and SAUNDERS families for more specialised requirements.

Why Crane?

  • Portfolio of specialised brands (XOMOX, SAUNDERS, CENTER LINE, KROMBACH, FLOWSEAL, DEPA, ELRO) from a single supplier
  • XOMOX Tufline valves in multiple variants — Full Port, Jacketed, Severe Service — for media from standard to extremely aggressive
  • SAUNDERS diaphragm valves over a wide DN008-DN350 range, with chemically matched seal materials
  • Industry-relevant certifications — TA-Luft 2021 for emissions, ISO 15848-1 for fugitive sealing
  • The Crane group has over 170 years of history

Which Crane codes and series are requested most often?

CodeDescription
XOMOX Tufline Full PortSleeved plug valve, maximum flow through the body
XOMOX Tufline XPSleeved plug valve, XP variant
XOMOX Tufline MultiportSleeved plug valve with several ways on one body
XOMOX Tufline LinedLined sleeved plug valve for corrosive media
XOMOX Tufline JacketedSleeved plug valve with heating/cooling jacket
XOMOX Tufline Severe ServiceSleeved plug valve for extremely aggressive media
XOMOX Tufline Tertiary Top SealSleeved plug valve with additional tertiary seal
XOMOX Tufline HydrofluoricSleeved plug valve for hydrofluoric acid service
SAUNDERS A TypeDiaphragm valve, DN008-DN350 range
SAUNDERS KB TypeDiaphragm valve, DN015-DN350 range
SAUNDERS IDVRange of industrial diaphragm valves
CENTER LINEButterfly valve brand from the Crane portfolio
FLOWSEALButterfly valve brand from the Crane portfolio
KROMBACHBall valve brand from the Crane portfolio
DEPADiaphragm pump brand from the Crane portfolio
ELROPeristaltic pump brand from the Crane portfolio
RESISTOFLEXLined pipe and hose brand from the Crane portfolio

Where is Crane equipment used?

  • Chemicals and petrochemicals — valves and pumps for corrosive or aggressive media
  • Pharmaceutical — SAUNDERS diaphragm valves for complete process isolation
  • Refineries and energy — XOMOX Tufline valves for severe service, including hydrofluoric acid
  • Water treatment — butterfly and diaphragm valves for flow regulation
  • Food and beverage industry — components compatible with hygiene requirements

How do we supply Crane in Romania?

We supply valves and pumps from the Crane ChemPharma & Energy portfolio (XOMOX, SAUNDERS, CENTER LINE, KROMBACH, FLOWSEAL, DEPA, ELRO) through EU supply channels, to order. For this brand we rely on the manufacturer's technical documentation; availability is confirmed in the quotation — given the very wide diversity of the range, we confirm the brand, series and exact size with the Crane network before quoting. As a guide, to order, usually 1–4 weeks from order confirmation. For a correct quotation we need: the type of valve required (gate, diaphragm, butterfly, ball), the DN size, the fluid-contact material and whether the application requires specific certification (TA-Luft, ISO 15848-1). For each brand in the portfolio, availability is confirmed in the quotation.

Full order codes for the Crane range are established through a technical request, and we check the availability of each item before quoting.

Frequently asked questions about Crane

What does Crane (Crane ChemPharma & Energy) make?

Crane ChemPharma & Energy makes industrial valves and pumps under several specialised brands — XOMOX sleeved plug valves, SAUNDERS diaphragm valves, CENTER LINE and FLOWSEAL butterfly valves, KROMBACH ball valves and DEPA/ELRO pumps — for chemicals, petrochemicals and energy.

What is the difference between a XOMOX and a SAUNDERS valve from Crane?

XOMOX is a quarter-turn plug valve with an elastomer sleeve, while SAUNDERS is a diaphragm valve, which completely isolates the mechanism from the fluid, recommended for extremely corrosive media or pharmaceutical applications.

What is the Tufline series from XOMOX (Crane)?

Tufline is the XOMOX brand's family of sleeved plug valves, with variants such as Full Port, Lined, Jacketed or Severe Service, chosen according to the chemical aggressiveness of the medium and the temperature requirements of the application.

Do you supply Crane valves in Romania and how long does it take?

Yes, we supply valves and pumps from the Crane portfolio to order through EU supply channels, usually in 1–4 weeks, depending on the brand, series and size checked before the quotation.

How do I request a Crane quotation?

Send the Crane code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: Crane ChemPharma & Energy (manufacturer documentation)