CEDES supplier in Romania
For CEDES we quote GridScan/Pro, cegard/Mini and cegard/Lift light curtains, ELS 300 and ELS 500 barriers, CabSafe and TOF Start 3D sensors and power supply and relay modules; we need the door or lift type and the full code.
Headquarters: Landquart, Switzerland
Who is CEDES and what does it make?
CEDES develops and makes sensors for door protection and for monitoring people, at Landquart, in Switzerland. The range goes from simple photoelectric barriers to light curtains and 3D time-of-flight (TOF) sensors. The applications are lifts and escalators, industrial doors (sectional, roll-up, high-speed), pedestrian doors (sliding, swing, revolving), warehouses and public transport.
For industrial doors, the GridScan/Pro is a light curtain certified SIL 2 and TÜV, for high-speed, sectional, roll-up and vertically closing telescopic doors, at closing speeds of up to 1.6 m/s. The outputs are PNP/NPN and FSS, and operation can be switched between masking mode and static mode. For lifts, the cegard/Mini is a light curtain for lift car door protection, with a monitoring height of 1582 or 1822 mm, in IP65 and IP67 variants. The CabSafe combines a controller, a 2D light curtain and a 3D infrared sensor, for the car entrance area, and meets the requirements of ANSI/ASME A17.1 and CSA B44.
The ELS 300 barriers are type 2, certified according to EN 13849, category 2, performance level C, with an integrated controller and PNP or NPN output. They are used on escalators, sliding doors, lift doors, vertically closing gates and personnel airlocks. Several units can be networked with a Y switch. The series also includes the ELS 263, ELS 400, ELS 500, the GLS sensors, 24 V UPS power supplies for sensors and relay modules with potential-free contact.
What do we supply from the CEDES range?
| Product | Description |
|---|---|
| GridScan/Pro and GridScan/Mini | Light curtains for industrial doors. The GridScan/Pro is certified SIL 2 and TÜV, for high-speed, sectional, roll-up and telescopic doors, with PNP/NPN and FSS outputs. Operation is switched between masking mode and static mode. |
| cegard/Mini, cegard/Lift | Light curtains for lifts: the cegard/Lift protects cars without inner doors, and the cegard/Mini monitors a height of 1582 or 1822 mm, in IP65 and IP67 variants. It is a lift car door protection solution. |
| CabSafe, TOF Start | 3D time-of-flight sensors, used on lifts and automatic doors. The CabSafe combines a controller, a 2D curtain and a 3D infrared sensor for the car entrance area and meets ANSI/ASME A17.1 and CSA B44, and the 2D curtain also meets the requirements of EN 81-20. |
| ELS 300, ELS 500 barriers | The ELS 300 is a type 2 photoelectric barrier, with an integrated controller, PNP or NPN output and light-on or dark-on switching, for applications with category 2 and performance level C, on escalators and sliding doors. The ELS 500 has a robust construction in an M12 housing and is used on industrial doors. |
Why CEDES?
- GridScan/Pro light curtains with SIL 2 — for high-speed industrial doors, at closing speeds of up to 1.6 m/s
- cegard/Mini with IP65 or IP67 — lift door protection in the standard or the water-resistant version
- CabSafe with a 3D TOF sensor — the car entrance area is monitored in depth as well, not only in a plane
- ELS 300 type 2 barriers — category 2, performance level C, with an integrated controller
- Applications from lifts and escalators to industrial doors and public transport — the same sensor system across several door types
Which CEDES codes and series are requested most often?
| Code | Description |
|---|---|
| GridScan/Pro | SIL 2 light curtain for industrial doors |
| GridScan/Mini | Light curtain for industrial doors |
| cegard/Mini | Light curtain for lift doors, IP65 or IP67 |
| cegard/Lift | Light curtain for lift cars without inner doors |
| CabSafe | Car entrance monitoring system, 2D + 3D TOF |
| ELS 300 | Type 2 photoelectric barrier, PL C, escalators and doors |
| ELS 500 | Robust photoelectric barrier in an M12 housing, for industrial doors |
| ELS 263 | Photoelectric barrier for doors and lifts |
| TOF Start | 3D time-of-flight sensor |
| GLS 326 | Slot barrier, three infrared beams, for lift positioning |
| UPS | Universal power supply |
| Relay Module | Module that converts the sensor's semiconductor output into a potential-free relay contact |
Where is CEDES equipment used?
- Lifts — lift car door protection and monitoring of the entrance area
- Escalators — monitoring of the entrance and exit, plus speed and direction
- Industrial doors — protection on sectional, roll-up and high-speed gates
- Pedestrian doors — sliding, swing and revolving, with safety and activation sensors
- Public transport — tram, metro and bus doors, with people counting
How do we supply CEDES in Romania?
We can quote CEDES sensors for lifts, escalators and automatic doors: light curtains, barriers, 3D sensors and auxiliary modules, including replacement of an existing sensor. For an accurate quotation, send the full code from the sensor or the controller, the door or lift type, the length to be monitored and the supply voltage. We supply to order, usually in 1–4 weeks; for complex systems the lead time may be longer, and the exact date appears in the quotation.
Safety sensors are quoted after the application is checked (door type, applicable standard), not on an isolated code alone.
Frequently asked questions about CEDES
What are GridScan/Pro, cegard/Lift, CabSafe and ELS 300 at CEDES?
The GridScan/Pro is a SIL 2 light curtain for industrial doors, the cegard/Lift is a light curtain for lift cars without inner doors, and CabSafe is a car entrance monitoring system. CEDES, from Landquart, Switzerland, makes photoelectric barriers, light curtains and 3D TOF sensors for lifts, escalators, industrial doors, pedestrian doors and public transport. The range also includes power supplies, relay modules and components for lift installations.
How do I choose between GridScan/Pro, cegard/Mini and ELS 300?
The GridScan/Pro is for industrial doors, with SIL 2. The cegard/Mini is used on lift doors, with heights of 1582 or 1822 mm. The ELS 300 is a type 2 barrier for escalators and sliding doors. Send the door type and the length to be protected.
Do you supply CEDES sensors in Romania and how fast?
Yes. CEDES sensors are supplied to order, usually in 1–4 weeks. An item can ship in 24–72 h when the item is in stock, locally or at the supplier. For complex systems the lead time may be longer and is stated in the quotation.
Can I replace an existing CEDES light curtain?
It depends on the existing series, the length, the output type (PNP, NPN or FSS) and the standard applicable to the door. Send the nameplate of the curtain, the door or lift type and mounting photos, and we check which current series fits.
What information do you need for a CabSafe or GridScan/Pro sensor?
For CabSafe, send the lift type, the standard required (for example ANSI/ASME A17.1 or EN 81-20) and the mounting type. For GridScan/Pro, the door type, the closing speed, the length of the curtain and the output (PNP/NPN or FSS). A photo of the old sensor speeds up identification.
How do I request a CEDES quotation?
Send the CEDES code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: CEDES AG (manufacturer documentation)

