Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

DYMAX supplier in Romania

UV-curing adhesives for industrial assembly

Request a quote

Who is DYMAX and what does it make?

Dymax is an American manufacturer of UV/LED curing adhesives, conformal coatings and light curing equipment, used in precision assembly in electronics, medical and automotive. The range includes adhesives for bonding dissimilar substrates, adhesives for plastics, protective coatings and encapsulation resins. For the Romanian market we can quote from the range of light-curable adhesives and Dymax curing lamps, used on assembly lines where cure time matters.

What sets Dymax adhesives apart is rapid curing on exposure to UV or visible light, in a few seconds, compared with classic adhesives that need hours of curing at room temperature. The range is organised by application: adhesives for bonding dissimilar substrates, adhesives for plastics and conformal coatings for electronic boards. The BlueWave FX lighting system completes the range, providing the light source needed to cure each formulation.

In electronics, medical devices or automotive components, Dymax makes sense where assembly requires a fast and consistent bond, without the part-to-part variability typical of heat-curing or air-curing adhesives. Adhesives for catheters, syringes or automotive camera modules are typical examples of application.

What do we supply from the DYMAX range?

ProductDescription
Adhesives for Bonding Dissimilar SubstratesUV/visible curing adhesives for the combined bonding of metal, plastic and glass, such as 9773 (stiffening of components on printed circuit boards) or 1072-M-Z (plastic medical devices). They offer flexibility or rigidity, depending on the formulation. The customer needs to state the materials bonded and the curing method available.
Adhesives for PlasticsFormulations optimised for bonding engineering plastics, such as the codes 3013-T (general-purpose adhesive for plastics and metals) or 7501-T-UR-SC-Z (protective resin). Used in the assembly of electronic housings or automotive components. The exact type of plastic is needed to recommend the suitable formulation from the range.
Conformal Coatings for ElectronicsProtective coatings with UV curing, applied on circuit boards for protection against moisture, dust and chemicals. They dry quickly under light, reducing process time compared with classic air-drying coatings. Send the type of operating environment of the protected board.
BlueWave FX Light Curing EquipmentUV/visible lighting systems for the controlled curing of Dymax adhesives, with emission calibrated for each formulation in the range. They are integrated on automated production lines or used manually at assembly stations. The adhesive used and the cycle time required must be stated for selecting the lamp.

Why DYMAX?

  • Curing in a few seconds on exposure to UV or visible light, compared with hours for classic adhesives
  • Ranges dedicated by application: bonding dissimilar substrates, plastics and conformal coatings
  • BlueWave FX lighting system for a controlled light source, compatible with the adhesive range
  • Low ionic content formulations, suitable for sensitive electronic components
  • Proven applications in medical, electronics, automotive and aerospace, with strict quality requirements

Which DYMAX codes and series are requested most often?

CodeDescription
9773UV-curing stiffening adhesive for PCB components
9310Adhesive with secondary heat cure, for edge fixing and stiffening of CSP components
1072-M-ZUV adhesive for assembling dissimilar substrates
1128A-M-ZVersion from the range for bonding dissimilar substrates
1406-M-ZLight-curable adhesive for dissimilar substrates
1405-M-UR-SC-ZFlexible adhesive for bonding dissimilar substrates
1172-M-UR-ZElastic formulation from the range for bonding dissimilar substrates
211-CTH-SC-ZLED adhesive, TPO-free, for plastics, intended for medical devices
1209-M-UR-SC-ZFast-curing UV adhesive for dissimilar substrates
1180-M-TVersion from the series for bonding dissimilar substrates
1045-MLight-curable adhesive for precision assembly
2103-MW-URIBOA-free adhesive for wearable medical devices
9204-WUV adhesive from the range for dissimilar substrates
3013-TAdhesive for bonding engineering plastics
7501-T-UR-SC-ZTPO-free protective resin, LED-curable, for sealing plastics and metals in automotive components
2101-MW-URMedium-viscosity, IBOA-free adhesive, for devices with a risk of skin sensitisation

Where is DYMAX equipment used?

  • Electronics — bonding components on printed circuit boards
  • Medical — assembling catheters and syringes
  • Automotive — camera modules, sensors and batteries for electric vehicles
  • Aerospace and defence — conformal coatings for critical circuits and sensors

How do we supply DYMAX in Romania?

For DYMAX we work from the manufacturer's technical documentation; the exact availability is confirmed in the quotation. We supply adhesives and BlueWave FX equipment to order, usually in 1–4 weeks. Send the materials bonded, the curing method available and, if you have it, the exact code of the adhesive used previously. This range is supplied to order; each order is confirmed against availability at the manufacturer before delivery.

The equivalence of a Dymax adhesive is established from the safety data sheet and from testing on the customer's actual application.

Frequently asked questions about DYMAX

What products does DYMAX make?

Dymax makes UV and LED curing adhesives, conformal coatings for electronic boards and light curing equipment such as the BlueWave FX lamps. The company is American and serves industries with strict quality requirements: electronics, medical, automotive and aerospace.

How do I choose the right DYMAX adhesive for an assembly application?

You need to state the materials bonded, the curing method available on the production line and the flexibility or rigidity requirements of the joint. With these data we identify the suitable code from the range of adhesives for dissimilar substrates or plastics.

What equipment is needed to cure DYMAX adhesive?

Dymax adhesives are cured with compatible UV/visible lamps, such as the BlueWave FX system, calibrated for each formulation in the range. Without the correct light source, the time and quality of curing can differ from the manufacturer's technical specifications.

Do you supply DYMAX adhesives in Romania, and how fast?

Yes, we supply to order, usually in 1–4 weeks. This range is supplied to order; we confirm actual availability at the manufacturer before the final quotation.

What data do you need for a DYMAX quotation?

Send the materials bonded, the curing method available and, if you have it, the exact code of the adhesive used previously. With these data we prepare the correct quotation from the range.

How do I request a DYMAX quotation?

Send the DYMAX code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Dymax Corporation (manufacturer documentation)