Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

GGB supplier in Romania

For GGB we quote metal-polymer bushings from the DU, DU-B, DP4, DP4-B and DP10 families, plus materials for heavy loads; from the code on the old bushing and from its dimensions we identify the suitable material and variant.

Founded in 1899 · Headquarters: Thorofare, New Jersey, USA

Request a quote

Who is GGB and what does it make?

GGB is an American manufacturer of self-lubricating plain bearings, founded in 1899 and based in Thorofare, in the state of New Jersey. Its speciality is metal-polymer bushings: a strong metal backing, a sintered bronze layer and a low-friction overlay based on PTFE or an engineering thermoplastic. This structure gives the materials called DU, DU-B, DP4, DP4-B, DP10, PMDS, PMDX, PMHX, MBDX and DX10, each designed for a particular operating regime.

For a maintenance engineer, the practical advantage is a bushing that needs no periodic greasing where a classic bronze bearing would need lubrication at short intervals. The materials are chosen according to the operating conditions: DU is the general-purpose variant, suitable both dry and lubricated; DP4 is lead-free and accepts linear, oscillating or rotary movements; DP10 copes well where lubrication is only marginal; PMDX, MBDX and DX10 are aimed at heavy loads at low speeds or at abrasive environments. The variants with a bronze backing, DU-B and DP4-B, add corrosion resistance in humid or salt-laden atmospheres.

In installations in Romania, such bushings are found in the joints of mobile machinery, in the actuation mechanisms of valves and pumps, in hydraulic cylinders and in equipment of foreign origin, where the worn part must be replaced with the same material structure, in the same mounting dimensions. For such replacements, the material code and the dimensions of the bushing are the data that matter.

What do we supply from the GGB range?

ProductDescription
GGB DU and DU-BThe general-purpose material of the range: a metal-polymer bushing with good wear behaviour and low friction, dry and lubricated. The DU-B variant has a bronze backing for humid or saline environments, where plain steel would corrode.
GGB DP4 and DP4-BLead-free material, used for linear, oscillating and rotary movements. DP4 is supplied as cylindrical bushings, flanged bushings and axial thrust washers; DP4-B has a bronze backing for corrosion resistance.
GGB DP10Material designed for lubricated applications, especially those with marginal lubrication, that is where the oil or grease film is not continuous. It is chosen where lubrication exists but is not constant.
GGB PMDX, MBDX, PMHX and DX10The family for heavy loads and low speeds. PMDX and MBDX are intended for marginal lubrication, PMHX adds robustness with a thin film and chemical resistance, and DX10 is recommended in harsh environments, with abrasion and erosion.

Why GGB?

  • Low-friction layer on a metal backing — the bushing works without periodic lubrication, which reduces greasing interventions on joints that are hard to reach
  • DU material for general use — dry or lubricated running, with low wear over a wide range of conditions
  • Lead-free DP4 — linear, oscillating and rotary movements, dry or lubricated
  • Variants with a bronze backing (DU-B, DP4-B) — extra corrosion resistance in humid or saline environments
  • Materials for heavy loads and harsh environments — PMHX, DX10, PMDX and MBDX cover marginal lubrication, abrasion and high loads at low speeds

Which GGB codes and series are requested most often?

CodeDescription
DUGeneral-purpose metal-polymer bushing, dry and lubricated running
DU-BDU variant with bronze backing, corrosion resistant
DP4Lead-free bushing for linear, oscillating and rotary movements
DP4-BDP4 variant with bronze backing for humid or saline environments
DP10Material for lubricated applications, including marginal lubrication
PMDSLow-friction material, dry running, small-amplitude oscillations
PMDXMarginal lubrication, relatively high loads and low speeds
PMHXRobustness at high loads, thin film, chemical resistance
MBDXMarginal lubrication, high loads at low speeds
DX10Harsh environments, resistant to abrasion and erosion
DP4 flanged bushingsFlanged bushings in DP4 material, in metric and inch variants
DP4 thrust washersAxial thrust elements in DP4 material

Where is GGB equipment used?

  • Mobile and construction machinery — bushings for joints, pins and articulated arms
  • Industrial hydraulics — rod guiding and cylinder joints
  • Valves and pumps — guide and actuation bearings, including in humid or saline environments
  • Industrial maintenance — replacing worn bronze bushings or bearings with lubrication-free bushings

How do we supply GGB in Romania?

From the GGB range we can quote metal-polymer bushings in the DU, DU-B, DP4, DP4-B and DP10 materials, as well as the variants for heavy loads. Supply is to order, usually 1–4 weeks, while a bushing can ship in 24–72 h when the item is in stock, locally or at the supplier. For a correct quotation, send us the material or the code from the old bushing, the inside diameter, the outside diameter and the length, whether it has a flange, and the working conditions: load, speed, temperature and type of movement. The exact lead time is confirmed in the quotation.

Equivalence with a bushing in another material is established on the basis of the old code, the dimensions and the working conditions.

Frequently asked questions about GGB

What does GGB make?

GGB makes self-lubricating plain bearings: first of all metal-polymer bushings with a metal backing, a sintered bronze layer and a low-friction overlay of PTFE or engineering thermoplastic. The DU, DP4, DP10, PMDX or DX10 materials differ in their working range, not in appearance, and the bushings are supplied cylindrical, flanged or as axial washers.

How do I choose between DU, DP4 and DP10 for a joint?

The choice starts from lubrication and the type of movement. DU covers dry and lubricated running, DP4 is the lead-free variant for linear, oscillating and rotary movements, and DP10 suits marginal lubrication. State the load, the speed and the temperature and we check the material before the quotation.

Can you supply GGB bushings in Romania and how fast?

Yes. The bushings are supplied to order, and the usual lead time is 1–4 weeks. Common sizes in DU and DP4 materials can ship in 24–72 h when the item is in stock, locally or at the supplier. We confirm the lead time in the quotation, after checking the code.

I have a worn bronze bushing; can I replace it with a metal-polymer bushing?

Sometimes yes, but not automatically: the replacement material depends on the surface load, the speed, the lubrication and the hardness of the shaft. Measure the diameters and the length, note the code on the old bushing if there is one, and describe the movement. From these data we confirm whether a GGB material fits.

What data do I need to send for a quotation on GGB bushings?

Send the material or the old code, the inside and outside diameter, the length, the shape (cylindrical or flanged), the quantity and the working conditions: load, speed, temperature, humid or saline environment. If you have a drawing or a photo of the joint, attach it to the request.

How do I request a GGB quotation?

Send the GGB code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Wikipedia, The Timken Company (manufacturer documentation)