Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

HAHN Gasfedern supplier in Romania

For HAHN Gasfedern we quote G gas springs, Z traction springs, F, S and X lockable springs, D and HB oil dampers and SDD dampers for sliding doors; for a quotation we need the stroke, the installed length, the nominal force and the end fittings.

Founded in 1960 · Headquarters: Aichwald, Germany

Request a quote

Who is HAHN Gasfedern and what does it make?

HAHN Gasfedern is a German manufacturer of gas springs and dampers, founded in 1960 and based in Aichwald. The programme covers compression gas springs, traction gas springs, lockable springs, double-stroke springs, pen-principle springs, hydraulic oil dampers and dampers for sliding doors. The elements are sealed and maintenance-free: compressed nitrogen gives the spring force, and a small amount of oil provides lubrication and damping at the end of the stroke.

The maximum internal pressure, without load, is 160 bar, and the force results from the pressure and the area of the piston rod; it rises as the rod enters the cylinder. The programme comprises 17 series in steel and in AISI 303/304 and AISI 316L/316Ti stainless steel, and the modular system allows versions with a protective tube, with a rod seal, for low (NT) or high (HT) temperatures or entirely in stainless steel (V2). Lockable springs stop in any position, over the whole stroke, elastically or rigidly in the traction direction.

Hydraulic oil dampers, in steel or stainless steel, brake the movement with damping forces between 5 and 2500 N, in the traction direction, the compression direction or both; the HB version is adjusted on site by turning the rod. In installations, these elements open hoods, hatches and access doors, balance heavy covers and limit the speed of some linear movements, on construction machinery, machines, ships and buildings. The order code comprises the type (G, Z, S etc.), the series, the stroke in mm, the installed length, the end fittings and the nominal force in N.

What do we supply from the HAHN Gasfedern range?

ProductDescription
Gas springs (G) and traction springs (Z, ZD, ZX)Compression and traction gas springs, filled with nitrogen, to balance heavy covers and hatches. Type ZD adds damping, and ZX allows locking. They are made in steel and in stainless steel, in 17 series, with the nominal force chosen according to the application.
Lockable gas springsElements F (elastic), S (rigid), X (absolutely rigid), SL (with free movement) and SX (double rigid) lock continuously over the whole stroke, by operating a release system. They are used on covers, hatches and seats that must be fixed in any position.
Double-stroke and pen-principle springsDouble-stroke springs give high initial and final forces in demanding applications, while pen-principle springs move the element without a complex release system. The series is chosen according to the stroke, the force and the way the movement must be stopped or released.
Oil dampers and SDDSealed hydraulic dampers, with fixed (D) or adjustable (HB) force, between 5 and 2500 N, in steel or in AISI 304/316 stainless steel. The SDD damper brakes heavy sliding doors, windows and modules.

Why HAHN Gasfedern?

  • 17 series in steel and AISI 303/304 and 316L/316Ti stainless steel — the stainless steel version suits chemical, food and marine environments
  • Modular system of versions — protective tube, rod seal, NT and HT versions for low or high temperatures
  • Lockable springs over the whole stroke — elastic (F) or rigid (S, X, SL, SX), depending on how precisely the position must be fixed
  • Hydraulic dampers from 5 to 2500 N — in traction, compression or both directions; HB is adjusted directly on site
  • Order code with type, series, stroke, installed length, end fittings and nominal force — allows exact identification of a replacement item

Which HAHN Gasfedern codes and series are requested most often?

CodeDescription
GCompression gas spring, steel or stainless steel
ZTraction gas spring
ZDTraction spring with damping
ZXLockable traction spring
FElastic lockable gas spring
SRigid lockable gas spring
XAbsolutely rigid lockable gas spring
SLLockable gas spring with free movement
SXDouble rigid lockable gas spring
DHydraulic oil damper, preset force
HBHydraulic oil damper, adjustable on site
SDDDamper for sliding doors, windows and modules
NTVersion for low temperatures
HTVersion for high temperatures
V2Full AISI 303/304 stainless steel version

Where is HAHN Gasfedern equipment used?

  • Construction machinery — hoods, access doors and seats operated with gas springs
  • Shipbuilding — hatches and covers in AISI 316L stainless steel
  • Chemical and food industry — springs and dampers in AISI 316L/316Ti stainless steel
  • Mechanical engineering — balancing of covers and braking of linear movements
  • Building technology and special vehicles — hatches, sliding doors and flaps

How do we supply HAHN Gasfedern in Romania?

We can quote HAHN gas springs, lockable springs, oil dampers and accessories, including replacement parts for existing assemblies. Standard catalogue items can ship in 24–72 h when the item is in stock, locally or at the supplier; otherwise they are brought in to order, usually in 1–4 weeks, and for special versions, depending on the specification, the lead time may be longer. For a correct quotation send the order code, if you have it, or the stroke, the installed length, the nominal force in N, the type of end fittings and the material (steel or stainless steel).

The right force for a cover or hatch depends on the mass, the angle and the position of the pivots, so it is established from these data and not from the dimensions of the old spring alone.

Frequently asked questions about HAHN Gasfedern

What does HAHN Gasfedern make?

HAHN makes in Germany compression and traction gas springs, lockable springs, double-stroke springs, hydraulic oil dampers and dampers for sliding doors, in steel and stainless steel. The elements are sealed, filled with nitrogen and maintenance-free.

How do I choose a gas spring by force and stroke?

The series is chosen according to the force required, the stroke wanted and the maximum installed length. The nominal force is given in N, and the stroke in mm. Send the mass of the cover, the opening angle, the position of the pivots and the available space; the series and the force are checked against the manufacturer's documentation before the quotation.

Do you supply HAHN gas springs in Romania, and how fast?

Yes. Standard items can ship in 24–72 h when the item is in stock, locally or at the supplier; otherwise to order, usually 1–4 weeks. For springs with special options or in a stainless steel version, depending on the specification, the lead time may be longer; the exact date is confirmed in the quotation.

How do I replace an existing gas spring, without documentation?

If you have the order code, we check it directly. Without it, we need the installed length, the stroke, the rod diameter, the nominal force in N, the type of end fittings and the material. Equivalence is not judged by length alone, because the same size can have very different forces.

What data is needed for a D or HB oil damper?

The damping direction (traction, compression or both), the force wanted between 5 and 2500 N, the stroke, the speed and the mass moved, the material and the end fittings. If the exact force cannot be established beforehand, the HB version allows adjustment on site.

How do I request a HAHN Gasfedern quotation?

Send the HAHN Gasfedern code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: HAHN Gasfedern GmbH (manufacturer documentation)