Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Gianneschi supplier in Romania

For Gianneschi we quote self-priming pumps from the ACB, CB and ECOJET-ECOINOX-JET series, pressurisation units with jet pumps, MBMA diesel engine driven pumps and ELL blowers; we need the family, the BSP connection and the fluid.

Founded in 1969

Request a quote

Who is Gianneschi and what does it make?

Gianneschi Pumps and Blowers makes pumps, water pressurisation units and blowers, with an emphasis on marine applications. The company has existed since 1969, the products are tested individually before delivery, and each has a serial number by which components and spare parts are traced. It works under the ISO 9001:2015 quality system, and the tests follow the rules of the main marine classification registers.

The ACB and CB pumps have a bronze body and impeller, with a stainless steel shaft, while ECOJET-ECOINOX-JET are made in bronze or in stainless steel. ACB 61G/80/90 are self-priming side channel pumps with a liquid ring, with connections from 1/2" to 1" BSP, used for bilge, ballast, diesel fuel, washing, firefighting and pressurisation units. CB has connections from 1/2" to 1 1/2" BSP, with an open or closed impeller. ECOJET-ECOINOX-JET are self-priming pumps with an integrated diffuser and Venturi tube, with connections of 1" to 1 1/2" BSP. MBMA-MACB-MACM are self-priming pumps driven by a diesel engine, with manual start, electric start or both, on a portable frame with rubber shock absorbers.

The ECOINOX-ECOJET-JET C.E. units replace classic pressure switch assemblies: a jet pump, a stainless steel manifold, a pressure reducer, a small vessel for water hammer and dry-run protection. On the air side, the ELL series offers good flow at low pressure, in painted steel construction, with a cast aluminium rotor, for the engine room and technical rooms. The range also includes boilers, circulation pumps and mixing valves for hot water, compressors, control panels and diaphragm tanks.

What do we supply from the Gianneschi range?

ProductDescription
ACB 61G/80/90Self-priming side channel pumps with a liquid ring, in bronze, with a stainless steel shaft. Connections from 1/2" to 1" BSP. They serve for bilge, ballast, diesel fuel, fresh water or seawater washing, firefighting and water pressurisation.
CB and ECOJET-ECOINOX-JETCB is a water pump with an open or closed impeller, with connections from 1/2" to 1 1/2" BSP. ECOJET and ECOINOX are self-priming with a diffuser and Venturi tube, in bronze or stainless steel, with connections of 1" to 1 1/2" BSP.
ECOINOX-ECOJET-JET C.E. pressurisation unitsAssembly with a jet pump in bronze or stainless steel, a stainless steel manifold, a pressure reducer, a small vessel for water hammer and dry-run protection. Connections from 1 1/2" to 2" BSP; the control panel is optional.
ELL blowersBlowers for good flow at low pressure, in painted steel, with a reversible cast aluminium rotor and a protective grille. They are used for ventilating the engine room and technical rooms. The family also includes the EL SR and EL ST series, plus silencers.

Why Gianneschi?

  • Self-priming side channel pumps with a liquid ring — they start without manual filling, useful for bilge and firefighting
  • Bronze construction with a stainless steel shaft, and a Noryl impeller on ECOINOX — materials chosen for fresh water and seawater
  • Units with a jet pump, pressure reducer and dry-run protection — one compact assembly replaces the classic pressure switch installation
  • MBMA diesel engine driven pumps, manual or electric start — independent power for bilge and fire duty
  • Each product is tested individually and has a serial number — spare parts are identified by the pump's serial number

Which Gianneschi codes and series are requested most often?

CodeDescription
ACB 61G/80/90Self-priming side channel pumps with a liquid ring, 1/2"–1" BSP
ACB 331/332/431Family of water pumps, in bronze
ACB 531/631Family of water pumps, in bronze
CBWater pump with an open or closed impeller, 1/2"–1 1/2" BSP
ECOJET-ECOINOX-JETSelf-priming pumps with a diffuser and Venturi tube
MBMA-MACB-MACMSelf-priming pumps driven by a diesel engine, 2"–2 1/2" BSP
GROUPS ECOINOX-ECOJET-JET C.E.Pressurisation units with a jet pump and pressure reducer
IDROMINI ACBPressurisation unit with a self-priming bronze pump and a diaphragm tank of 2–5 litres
ELLPainted steel blower for good flow at low pressure
ELL/APVersion from the ELL blower family
EL SR - EL STBlowers from the same family as ELL

Where is Gianneschi equipment used?

  • Shipbuilding — bilge, ballast and firefighting pumps on vessels
  • Seawater installations — circulation, supply and washing with fresh or salt water
  • Water pressurisation — units with a jet pump for onboard water networks
  • Technical ventilation — blowers for the engine room and technical rooms
  • Treatment, circulation and cooling systems — areas added recently alongside the marine one

How do we supply Gianneschi in Romania?

We can quote the pumps from the ACB, CB and ECOJET-ECOINOX-JET series, the pressurisation units and the ELL blowers. To identify the right item we need the name of the family and the number from the plate, the BSP connection, the pumped fluid, the motor voltage and the place of installation. If you are replacing an existing pump, a photo of the plate helps us. Items are supplied to order; the lead time depends on the version requested and appears in the quotation.

For pumps with a family name, for example CB, we determine the exact size from the number on the plate before issuing the quotation.

Frequently asked questions about Gianneschi

What are the MBMA, MACB and MACM series and the ELL blowers used for at Gianneschi?

Gianneschi makes water pumps, pressurisation units, blowers, hot water boilers, compressors and control panels, mainly for marine applications. The company has existed since 1969, and each product is tested individually and has a serial number. The range also includes MBMA, MACB and MACM, self-priming pumps driven by a diesel engine, with connections of 2"–2 1/2" BSP, and ELL, a painted steel blower for good flow at low pressure.

How do I choose between ACB, CB and ECOJET?

ACB are side channel pumps with a liquid ring, with connections from 1/2" to 1" BSP. CB has an open or closed impeller and connections up to 1 1/2" BSP. ECOJET and ECOINOX have a diffuser and Venturi tube, suitable for pressurisation. Send the fluid, the connection and the place of installation.

Do you supply Gianneschi pumps in Romania and how fast?

Gianneschi pumps, pressurisation units and blowers are ordered, and the usual lead time is 1–4 weeks. Items can ship in 24–72 h when the item is in stock, locally or at the supplier. For unusual sizes or materials the lead time may be longer, and the exact date appears in the quotation.

Can I replace an existing CB pump?

Yes, after checking the complete number on the plate: CB includes versions with an open or closed impeller, with threaded or flanged connections. Send a photo of the plate, the BSP connection and the motor voltage, and we confirm the suitable version in the quotation.

What data do you need for an ECOINOX, ECOJET or JET C.E. unit?

For an ECOINOX, ECOJET or JET C.E. unit we need the pump type, the material you want, bronze or stainless steel, the connection from 1 1/2" to 2" BSP, the supply voltage and whether you want a control panel. State whether the pump works with seawater or fresh water, to choose the material.

How do I request a Gianneschi quotation?

Send the Gianneschi code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Gianneschi Pumps and Blowers S.r.l. (manufacturer documentation)