Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Lagersmit supplier in Romania

For Lagersmit we quote Liquidyne seals for pump shafts, Supreme seals for stern tubes and thrusters, closed-loop lubrication units, stern tubes and bearings; we need the shaft diameter and the type of installation.

Founded in 1856 · Headquarters: Alblasserdam, the Netherlands

Request a quote

Who is Lagersmit and what does it make?

Lagersmit from Alblasserdam, the Netherlands, designs seals for rotating shafts and related systems. The range is divided into two large families: Supreme, for stern tubes and thrusters of ships, and Liquidyne, for pump shafts working with fluids loaded with particles. To these are added stern tubes with bearings, closed-loop lubrication units, flow meters and settling pipes.

Liquidyne is a water-lubricated lip seal that replaces the packed gland and the mechanical seal. The lips work on a sleeve with helical grooves, and the rotation of the sleeve draws water between the grooves and the lip. The condition of the seal is followed through the leakage flow: when the flow reaches 20 % of the initial value, maintenance is planned. The 3-stage WA version is made for dredge, slurry and mine pumps and is supplied for shafts of 35–590 mm; the 2-stage version is for relatively clean media, and LDS for polluted and aggressive media.

Supreme covers the sealing of stern tubes, bow thrusters and other points on the shaft line. The Standard version separates the water from the lubricant and covers shafts of 116–1150 mm, with a bronze housing at the rear and a cast iron one at the front. The family also includes Ventus, SeaGuard, Athmos, Hydrofuse and versions for gearboxes, rudder stock and stabilizers.

Where the pump has no external flushing water source, the closed-loop lubrication unit recirculates and filters the water for Liquidyne and monitors the operation of the seal. The range also includes stern tubes with white-metal-lined bearings, for oil or grease lubrication.

What do we supply from the Lagersmit range?

ProductDescription
Liquidyne, seals for pump shafts2-stage versions for clean media, 3-stage WA for dredge, slurry and mine pumps, 3-stage for vacuum and LDS for polluted and aggressive media. The choice depends on the shaft diameter, the fluid and the particles in it.
Supreme, seals for shaft linesStandard, Ventus, SeaGuard, Athmos, Hydrofuse, Inland Vessel and versions for gearboxes, rudder stock and stabilizers. They are chosen according to the type of vessel, the shaft diameter and whether the installation is new or an upgrade.
Closed-loop lubrication unitIt recirculates and filters the flushing water for the 3-stage Liquidyne, including the vacuum version, when there is no external source. It can be built to fit the available space and gives an alarm when maintenance must be planned.
Stern tubes and bearingsComplete systems with white-metal-lined bearings for oil or grease lubrication, plus self-lubricated intermediate bearings. They are supplied machined, for new builds or upgrades, and work together with Lagersmit seals.

Why Lagersmit?

  • Water-lubricated Liquidyne, instead of a gland or mechanical seal — lower friction on the shaft and maintenance that can be planned
  • Monitoring through the leakage flow — at 20 % of the initial flow, maintenance is scheduled in good time
  • 3-stage WA version for shafts of 35–590 mm — suited to dredge, slurry and mine pumps with abrasive particles
  • Supreme Standard for shafts of 116–1150 mm — stern tube sealing for new builds and for upgrades
  • Closed-loop lubrication unit — Liquidyne can also work where there is no flushing water from an external source

Which Lagersmit codes and series are requested most often?

CodeDescription
Liquidyne 2-stagePump shaft seal for relatively clean media
Liquidyne 3-stage WASeal for dredge and slurry pumps, shafts 35–590 mm
Liquidyne 3-stage3-stage seal for pump shafts
Liquidyne 3-stage Vacuum3-stage version for vacuum
Liquidyne LDSSeal for pumps with polluted and aggressive media
Supreme StandardStern tube and thruster seal, shafts 116–1150 mm
Supreme VentusShaft line seal with environmental requirements
Supreme SeaGuardSeal with redundant lip
Supreme AthmosSeal for large vessels, cruise ships and ferries
Supreme HydrofuseSeal that monitors the radial clearance of the shaft
Closed Loop Lubrication UnitClosed-loop lubrication unit for Liquidyne
Stern Tubes and BearingsStern tubes and white metal bearings

Where is Lagersmit equipment used?

  • Dredging — Liquidyne seals for dredge and slurry pumps with abrasive particles
  • Mining industry — slurry and booster pumps with loaded water
  • Shipbuilding — Supreme seals for stern tubes and thrusters
  • River and sea transport — river vessels, ferries and large yachts
  • Tidal energy production — Supreme seals for underwater generators

How do we supply Lagersmit in Romania?

We can quote Liquidyne and Supreme seals, closed-loop lubrication units and stern tube components, in the configuration of your installation. For a quotation, send the type of the existing seal or the name of the installation, the shaft diameter, the fluid or the type of vessel and, if you have it, the nameplate or the drawing. If you are replacing a packed gland seal, the working pressure and the speed also help. Items are supplied to order; the lead time depends on the version, and for configured seals it may be longer.

The suitable seal version is confirmed in the quotation, based on the shaft diameter, the fluid pumped and the mounting conditions you send.

Frequently asked questions about Lagersmit

What distinguishes the Supreme Ventus, SeaGuard and Athmos seals from Lagersmit?

Supreme Ventus is a shaft line seal with environmental requirements, SeaGuard has a redundant lip, and Athmos is made for large vessels, cruise ships and ferries.

How do I choose the Liquidyne version for a pump?

The version depends on how clean the fluid is. The 2-stage applies to relatively clean media, the 3-stage WA to dredge and slurry pumps with particles above 100 microns, and LDS to polluted and aggressive media. Send the shaft diameter and the nature of the fluid.

Can you supply Lagersmit seals in Romania, and how quickly?

Yes, the seals are supplied to order. Simple parts arrive sooner, while seals configured for the shaft usually take longer. We confirm the exact lead time in the quotation.

Can I replace the gland of a pump with a Liquidyne seal?

Yes, Liquidyne is designed as an alternative to the packed gland and the mechanical seal, with water lubrication. We check compatibility based on the shaft diameter, the axial and radial play, the fluid and the mounting space; the replacement is confirmed once we receive them.

What data should I send for a Supreme Standard stern tube seal?

Send the type of the existing seal or of the vessel, the shaft diameter (Supreme Standard covers shafts of 116–1150 mm), the propeller type (fixed or variable pitch) and whether it is a new build or an upgrade. A photo of the nameplate and the drawing of the shaft line shorten the check considerably.

How do I request a Lagersmit quotation?

Send the Lagersmit code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Lagersmit (manufacturer documentation)