Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Liquiflo supplier in Romania

Gear pumps for industrial chemical fluids

Request a quote

Who is Liquiflo and what does it make?

Liquiflo is an American manufacturer of gear pumps for the transfer of chemical fluids, specialised in solutions with a mechanical seal or sealless (mag-drive). The range includes the H, 2, 3 and 4 series, plus the Poly-Guard family, in mag-drive or close-coupled versions, with a stainless steel casing lined with fluoropolymer for corrosive media. For the Romanian market we can quote Liquiflo pumps based on the flow rate, differential pressure and viscosity of the fluid being transferred.

What sets Liquiflo apart is the very wide viscosity coverage of the H series — from 0.3 to over 100,000 cP — combined with single or double mechanical seal options or a sealless mag-drive mounting, depending on how hazardous the pumped fluid is. The Poly-Guard family, with nine sizes from P1 to P9, covers flow rates from 1.4 to 25 GPM at differential pressures of 80–100 psi, and is designed for inorganic acids, bases and strongly corrosive salts.

For chemical and water treatment installations in Romania, Liquiflo pumps are relevant where fluid viscosity varies widely over time or where the chemical compatibility of the wetted materials matters more than the raw flow rate of the pump.

What do we supply from the Liquiflo range?

ProductDescription
Gear Pumps — H SeriesIndustrial gear pumps, with flow rates of up to 55 GPM, differential pressure of up to 225 psi (300 psi on certain models) and a viscosity range from 0.3 to over 100,000 cP. Available in 12 sizes, in 316 stainless steel or alloy C, with single or double mechanical seal options or mag-drive mounting. Typical application: transfer of chemical fluids of variable viscosity, from thin solvents to thick resins.
Poly-Guard Pumps — P1–P9 SeriesGear pumps, available in mag-drive or close-coupled versions, with a 316 stainless steel casing lined with corrosion-resistant PFA (fluoropolymer), in nine sizes from P1 (1.4 GPM) to P9 (25 GPM), at a differential pressure of 80–100 psi and a maximum temperature of 200°F, at speeds of up to 1,750 rpm. Non-metallic internal components reduce the risk of contamination when pumping acids or other aggressive fluids. The size is chosen according to the required flow rate and the differential pressure of the system.
Gear Pumps — Series 2, 3 and 4A family of gear pumps in progressive sizes, for general chemical fluid transfer applications where the H series is not needed in terms of viscosity or pressure. The details of series 2, 3 and 4 (sizes, flow rates, configurations) are confirmed on the manufacturer's data sheet. Choosing the right size depends on the required flow rate, the differential pressure and the type of seal the customer wants.

Why Liquiflo?

  • A very wide viscosity range on the H series, from thin fluids to viscous pastes
  • Poly-Guard family with a stainless steel casing lined with fluoropolymer, for corrosive media
  • Nine sizes available in the Poly-Guard series, from low dosing flow rates to medium transfer flow rates
  • Single or double mechanical seal options, or a sealless design, chosen according to how hazardous the fluid is

Which Liquiflo codes and series are requested most often?

CodeDescription
H-SeriesGear pump, viscosity 0.3–100,000 cP
P1Poly-Guard, 1.4 GPM, 100 psi
P2Poly-Guard, 2.3 GPM, 100 psi
P3Poly-Guard, 3.1 GPM, 100 psi
P4Poly-Guard, 4.9 GPM, 100 psi
P5Poly-Guard, 8.5 GPM, 100 psi
P6Poly-Guard, 11.3 GPM, 100 psi
P7Poly-Guard, 14.2 GPM, 100 psi
P8Poly-Guard, 18.8 GPM, 100 psi
P9Poly-Guard, 25 GPM, 80 psi
2-SeriesGear pump, small size
3-SeriesGear pump, medium size
Model 41Series 4 gear pump, mag-drive/close-coupled
Model 43Series 4 gear pump, variant
Model 44Series 4 gear pump, variant
Model 45Series 4 gear pump, variant
Endura AB-SeriesLiquiflo series; type and parameters are confirmed on the manufacturer's data sheet
FTS-SeriesFTS pump series (e.g. FTS 150/200, FTS 300/400), as per the manufacturer's data sheet

Where is Liquiflo equipment used?

  • Process chemistry — transfer of fluids with variable viscosity
  • Water treatment — dosing of corrosive chemicals with Poly-Guard pumps
  • Petroleum industry — transfer of viscous petroleum products
  • Paints and adhesives — pumping thick fluids with gear pumps
  • Pharmaceutical — transfer of fluids where contamination must be avoided

How do we supply Liquiflo in Romania?

For Liquiflo pumps we work only with the information in the manufacturer's technical documentation to describe the H, Poly-Guard and 2/3/4 series; availability is checked on each request, as these are pumps configured per project according to viscosity and pressure. We bring them in to order through EU supply channels, typically in 1–4 weeks, confirmed after the manufacturer validates the configuration. For a quotation, we need the required flow rate, the differential pressure, the fluid viscosity and the chemical compatibility required for the wetted materials. Warranty service is handled through the manufacturer; we give lead times after the factory's direct reply.

Shorter lead times are given after the manufacturer's direct reply. Warranty-period service remains with the manufacturer.

Frequently asked questions about Liquiflo

What does Liquiflo make?

Liquiflo makes gear pumps for the transfer of chemical fluids, in the H, 2, 3, 4 series and the Poly-Guard family in mag-drive or close-coupled versions, covering a wide viscosity range, from thin solvents to thick pastes.

Which Liquiflo pump should I choose for dosing a corrosive chemical?

The Poly-Guard family, with a stainless steel casing lined with fluoropolymer and available in a mag-drive version (without a mechanical seal), is designed for corrosive fluids — sizes P1–P9 cover flow rates from 1.4 to 25 GPM.

How do I choose the right size from the Poly-Guard series?

Send us the required flow rate in GPM and the differential pressure of the system. The Poly-Guard series has nine sizes, from P1 to P9, each with a specific maximum flow rate and differential pressure at 1,750 rpm.

Do you supply Liquiflo pumps in Romania and how long does it take?

Yes, we bring in Liquiflo pumps to order through EU supply channels, typically in 1–4 weeks, confirmed exactly once the manufacturer validates the size and the materials required by the project.

How do I request a Liquiflo quotation?

Send the Liquiflo code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: Liquiflo Fluid Transfer Solutions, Liquiflo (manufacturer documentation)