Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Microtork supplier in Romania

For Microtork we quote mechanical rotary servo valves from the models 187 HSL, 375 SST, 375 XLHG, 375 XLHGHP, Model 5 and Model 5SQ; items are identified by model, connection type (NPT or SAE) and system pressure.

Headquarters: Warren, New Jersey, USA

Request a quote

Who is Microtork and what does it make?

Microtork is a company in Warren, New Jersey, that makes mechanical rotary four-way high-gain servo valves, used for the precise positioning of hydraulically or pneumatically actuated equipment. The valve has a single moving part, can be mounted in any position and needs no adjustments; a very small torque, of a few inch-ounces, is needed to rotate it, which simplifies the feedback linkage. The internal parts are in stainless steel, and the body can be aluminium, steel or stainless steel.

The principle is mechanical. In the null position, the valve blocks the flow to the cylinder, so the load stays in place. A small rotation of the shaft opens the ports: pressurised fluid enters one side of the cylinder, while the other side is emptied, until the cylinder returns to the set value. Sensitivity and gain are adjusted by changing the length of the control arm. There are no electrical connections.

The models are 187 HSL and 375 SST, with aluminium body and 1500 psig pressure, then 375 XLHG and 375 XLHGHP, with steel body, square passage and SAE ports, as well as Model 5 and Model 5SQ, the latter with a square body and 2000 psig. The valves are found in stack height control for sheets, in winding and unwinding of sheet metal, in strip guiding and in flying shear control. For a quotation, the model, the connection, the pressure and the shaft length matter.

What do we supply from the Microtork range?

ProductDescription
Models 187 HSL and 375 SSTServo valves with aluminium body, stainless steel internal parts, pressure of 1500 psig and maximum flow of 3.0 GPM at 1500 psig. The ports are radial, NPT only. 187 HSL has a 0.187 inch shaft, and 375 SST has a 0.375 inch shaft.
Models 375 XLHG and 375 XLHGHPSteel body with square flow passages for higher gain, maximum flow of 4.0 GPM at 1500 psig and radial SAE ports. The HP version has additional screws, shaft seals and O-rings for high pressure.
Model 5 and Model 5SQModel 5 has a round body in aluminium or stainless steel and NPT or SAE ports. Model 5SQ has a square stainless steel body, NPT ports on a single plane, pressure of 2000 psig and maximum flow of 3.0 GPM at 1500 psig.
Positioning and guiding applicationsThe same valves are used for stack height control, for winding and unwinding sheet metal or paper, for guiding the strip by its edge and for maintaining level with a feedback pendulum.

Why Microtork?

  • A single moving part — no adjustments and mountable in any position, which shortens commissioning
  • Very small actuation torque — the feedback arm can be a light follower on the stack, strip or coil
  • No electrical connections — the positioning loop stays purely mechanical and hydraulic
  • Internal parts in stainless steel — body of your choice in aluminium, steel or stainless steel
  • Several port types — NPT or SAE, with versions for higher pressure

Which Microtork codes and series are requested most often?

CodeDescription
187 HSLServo valve with aluminium body, 1500 psig, 3.0 GPM, 0.187 inch shaft, NPT ports
375 SSTServo valve with aluminium body, 1500 psig, 3.0 GPM, 0.375 inch shaft, NPT ports
375 XLHGServo valve with steel body, square passage, 4.0 GPM, SAE ports
375 XLHGHPServo valve with steel body for high pressure, with reinforced shaft seals, SAE ports
Model 5Servo valve with round body in aluminium or stainless steel, NPT or SAE ports
Model 5SQServo valve with square stainless steel body, 2000 psig, NPT ports on a single plane

Where is Microtork equipment used?

  • Sheet metal processing — loop and tension control on coils, unwinders and rewinders
  • Guiding of strips of paper, metal or other materials by their edge
  • Flying cut-off machines — control of flying shears
  • Stack height control for sheets — feedback follower on the stack
  • Hydraulic or pneumatic positioning systems — following of templates and cams

How do we supply Microtork in Romania?

We can quote Microtork servo valves from the models 187 HSL, 375 SST, 375 XLHG, 375 XLHGHP, Model 5 and Model 5SQ. For an accurate quotation, send the model from the valve body or a photo, the port type (NPT or SAE), the system pressure, the fluid and the length of the control arm from the current installation. Items are brought in to order, usually in 1–4 weeks; depending on the model and the specification, the lead time may be longer. A valve can ship in 24–72 h when the item is in stock, locally or at the supplier, and the exact lead time appears in the quotation.

For valves whose body no longer shows a legible model, we set the equivalent in the quotation based on the ports, the pressure and the flow area.

Frequently asked questions about Microtork

What are the 187 HSL, 375 SST and Model 5 models from Microtork?

187 HSL, 375 SST and Model 5 are mechanical rotary four-way servo valves for hydraulic or pneumatic positioning systems. The valve has a single moving part and no electrical connections. The company is in Warren, New Jersey, USA.

How do I choose between the 187 HSL, 375 SST and 375 XLHG models?

187 HSL and 375 SST have an aluminium body, 1500 psig and 3.0 GPM. 375 XLHG has a steel body, square passages for higher gain, 4.0 GPM and SAE ports. Send the pressure, the port type and the shaft length to confirm the model.

Do you supply Microtork valves in Romania, and how quickly?

Yes. Valves are brought in to order, usually in 1–4 weeks. A valve can ship in 24–72 h when the item is in stock, locally or at the supplier. For models with port or pressure variants the lead time may be longer, and the quotation states it.

Can I replace an existing 375 XLHG valve?

Yes. 375 XLHG is a mechanical valve with steel body, radial SAE ports and a 0.375 inch shaft, not a solenoid valve. Send a photo of the body, the port type and the pressure. Based on them we determine whether the HP version is needed and confirm in the quotation.

What do I need to request a 375 SST or Model 5 servo valve?

For a 375 SST or Model 5 servo valve, send the model or a photo of the valve, the port type (NPT or SAE), the working pressure, the flow required, the fluid and the length of the control arm. For a new application, describe the movement to be controlled, for example strip guiding or stack height.

How do I request a Microtork quotation?

Send the Microtork code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Microtork (manufacturer documentation)