Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Mollet supplier in Romania

For Mollet we quote the MOLOSwave MWF27 guided wave radar, MOLOSbob LF20 tape plumb-bob systems, MOLOSroto rotary paddle detectors, MOLOSvibro vibration sensors and FBM51 microwave barriers; the item is identified by series and measured material.

Headquarters: Osterburken, Germany

Request a quote

Who is Mollet and what does it make?

Mollet makes equipment for level measurement and detection in bulk materials, based in Osterburken, Germany. The range is divided into continuous level measurement, point level detection and interface layer measurement. Typical applications are silos and hoppers, including where there is dust, build-up, condensation, high temperatures, vibration or explosion hazard. The sectors served include building materials, chemicals, energy, the food industry, plastics, pharmaceuticals, paper, agriculture, animal feed and recycling.

For continuous measurement, the MOLOSwave MWF27 is a guided wave radar: the high-frequency signal travels along a rod or a cable, is reflected at the surface of the material, and the level is calculated from the propagation time. The MOLOSbob LF20 measures level with a tape plumb-bob system, and MOLOSvisu are the displays for the measured value.

For point level there are several principles. MOLOSroto are rotary paddle detectors, with models from DF11 to DF30, adapted to heavy materials, to thin build-up or to heavy duty. MOLOSvibro (VF12–VF65) are vibration sensors, MOLOSmembran use a membrane, MOLOSbarrier FBM51 is a contactless microwave barrier, MOLOSpendu are pendulum indicators, and MOLOSswim detects the level in water. For a quotation, the measured material, the temperature, the pressure, the probe length and the Ex zone classification matter.

What do we supply from the Mollet range?

ProductDescription
MOLOSwave MWF27 – guided wave radarContinuous level measurement in bulk materials, in silos and containers. The high-frequency signal follows a rod or a cable and is reflected at the surface of the material. The value is transmitted as an electronic signal or shown on the MOLOSvisu.
MOLOSroto – rotary paddle detectorsModels from DF11 to DF30: DF11 for simple applications, DF22 for thin build-up, DF23 for heavy materials, DF28 with protection tube, DF30 for loading telescopes. There are versions for extreme temperatures, pressure, Ex zones and sticky materials.
MOLOSvibro and MOLOSmembranMOLOSvibro (VF12, VF13, VF15, VF62, VF63, VF65) are vibration point level sensors. MOLOSmembran (MFA, MFB, MFD, MFE, MFE-A) are membrane point level sensors.
MOLOSbob LF20 and MOLOSbarrier FBM51MOLOSbob LF20 is a tape plumb-bob system for continuous measurement in bulk materials. MOLOSbarrier FBM51 is a contactless microwave barrier for level detection.

Why Mollet?

  • Guided wave radar for bulk materials — works in the presence of dust, build-up and condensation
  • Several point level detection principles (paddle, vibration, membrane, microwave, pendulum) — the one suited to the material is chosen
  • MOLOSroto with versions for extreme temperatures, high pressures and sticky materials — covers demanding applications
  • Options for dust or gas explosion hazard zones — installation in silos with an explosive atmosphere
  • Interface layer measurement with MOLOSvibro, MOLOSbob or MOLOSroto — useful for stratified materials

Which Mollet codes and series are requested most often?

CodeDescription
MWF27MOLOSwave, guided wave radar for continuous measurement in bulk materials
LF20MOLOSbob, tape plumb-bob system for continuous measurement
DF11MOLOSroto, rotary paddle detector for simple applications
DF22MOLOSroto for materials with thin build-up
DF23MOLOSroto for heavy bulk materials
DF28MOLOSroto with protection tube
DF30MOLOSroto for full-level detection in loading telescopes
VF12MOLOSvibro, vibration point level sensor
MFAMOLOSmembran, membrane sensor for point level
FBM51MOLOSbarrier, contactless microwave barrier

Where is Mollet equipment used?

  • Building materials — cement and aggregate silos
  • Chemicals and plastics — granule and powder silos
  • Energy — bulk materials in energy plants
  • Food and animal feed — grain and flour silos
  • Recycling and wood — hoppers with non-uniform materials

How do we supply Mollet in Romania?

We can quote Mollet level equipment for silos and hoppers: guided wave radar, rotary paddle detectors, vibration sensors and microwave barriers. For a correct quotation, send the code from the equipment (for example DF28 or MWF27), the measured material and its grain size, the temperature and pressure in the silo, the probe or tube length, the supply voltage and the Ex zone classification. The equipment is supplied to order, usually within 1–4 weeks; items can ship in 24–72 h when the item is in stock, locally or at the supplier. The lead time can be longer for special versions.

For an incomplete code or for versions with options, we complete the list of options together with you before the quotation.

Frequently asked questions about Mollet

What equipment does Mollet make?

Mollet makes equipment for level measurement and detection in bulk materials: MOLOSwave guided wave radar, MOLOSbob tape plumb-bob system, MOLOSroto rotary paddle detectors, MOLOSvibro vibration sensors, membrane sensors, microwave barriers and pendulum indicators.

When do I choose guided wave radar and when a rotary paddle detector?

The MWF27 guided wave radar measures the level continuously, so it shows how much material is in the silo. The rotary paddle detector only signals that a level has been reached, full or empty. For the choice, send the material, the silo height and what the equipment must indicate.

Do you bring in Mollet equipment to Romania, and how quickly?

Yes, to order. The lead time is usually 1–4 weeks, and the equipment can ship in 24–72 h when the item is in stock, locally or at the supplier. Versions with special options can have a longer lead time.

Can I replace an existing Mollet detector, for example a DF28?

Yes, if we identify the version. The full code from the nameplate (for example DF28 with its options), the tube length, the temperature, the pressure and the Ex classification let us prepare the quotation for the correct item. We confirm the match on the exact version from the nameplate.

What data do you need for the MOLOSwave MWF27 radar or for the MOLOSbob LF20?

For the MWF27 guided wave radar or for the MOLOSbob LF20, send the material and its grain size, the type of measurement (continuous or point level), the process temperature and pressure, the probe or tube length, the supply voltage, the output required and the Ex zone classification for dust or gas.

How do I request a Mollet quotation?

Send the Mollet code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Mollet (manufacturer documentation)