Monitran supplier in Romania
Accelerometers, LVDTs and vibration switches
Founded in 1986
Who is Monitran and what does it make?
Monitran is a privately owned British manufacturer, founded in 1986 and based near High Wycombe, west of London, which makes sensors and systems for measuring vibration and displacement. The range covers accelerometers for analysis and for monitoring, velocity sensors, LVDT transducers, eddy current probes and drivers for them, plus portable vibration meters, vibration switches and junction boxes. The company manufactures in the United Kingdom and can develop sensors on request, as an OEM.
The practical distinction in the range is between two families of accelerometers. Those for analysis (1100 and 2200 series) have an alternating current output and connect to portable data collectors or online analysers, which reproduce the full spectrum. Those for monitoring (1185, 1187, 2285 and 2287 series) give a continuous signal, usually 4–20 mA, which is taken directly by a PLC or a DCS. The 2200, 2285 and 2287 series are the newer versions, with redesigned electronics, better shock resistance and low noise; there are also variants for hazardous (explosive) areas, according to the manufacturer's documentation.
For maintenance in Romania, Monitran is useful when a vibration sensor has to be replaced without changing the whole acquisition system, when a motor, pump or fan needs simple protection through a vibration switch, or when an LVDT is mounted on a press or an adjustment shaft. Sensitivity, connector, cable entry and operating environment decide the right variant, and these are checked against the code on the sensor.
What do we supply from the Monitran range?
| Product | Description |
|---|---|
| Accelerometers for analysis (1100 / 2200) | Constant-current accelerometers with isolated AC output, in stainless steel, for portable data collectors and online analysers. The 2200 series brings increased shock resistance and stable bias over the whole temperature range. |
| Sensors for monitoring (1185 / 1187 / 2285 / 2287) | Velocity transducers (1185, 2285) and accelerometers (1187, 2287) with continuous output, generally 4–20 mA, for direct input into a PLC or DCS. The new series have an internal Faraday shield, and some versions have approvals according to the datasheet. |
| Switches and vibration meters | MTVS0004 is a vibration switch with alarm and trip relays, measured in velocity according to ISO 10816, for motors, pumps, fans and gearboxes. MTN/VM220 is a portable, rechargeable vibration meter with a memory of 100 readings. |
| Industrial LVDTs | Linear displacement transducers in a stainless steel housing, with ranges between ±0.5 and ±550 mm and linearity better than ±0.5%. The available outputs are AC, bipolar DC, 0–5 V, 0–10 V and 4–20 mA, and the options include high temperature and spring-loaded rod. |
Why Monitran?
- Two clearly separated families — accelerometers with AC output for spectral analysis and accelerometers with current-loop output for PLC or DCS
- New series with improved electronics — 2200, 2285 and 2287 withstand shocks and interference better than the older series
- Variants for Ex areas — approvals according to the manufacturer's documentation for certain accelerometer models
- Sensors for special conditions — temperatures up to 250 °C at the sensor head, dual outputs (acceleration and temperature), triaxial versions
- Stainless steel LVDTs — ranges from ±0.5 mm to ±550 mm and IP65 or IP68 sealing, useful on production lines and on heavy equipment
Which Monitran codes and series are requested most often?
| Code | Description |
|---|---|
| MTN/1010 | Accelerometer for analysis, top entry, 25 mm base, TNC connector |
| MTN/1310 | Triaxial accelerometer with three charge amplifiers in one moulded housing |
| MTN/1100 | Series of accelerometers for analysis with isolated AC output |
| MTN/2200 | New series of accelerometers for analysis, with increased shock resistance |
| MTN/1185 | Velocity transducer for monitoring, DC output; suffix I marks the Ex version |
| MTN/1187 | Accelerometer for monitoring, 4–20 mA output; suffix W marks the submersible version |
| MTN/2285 | Velocity transducer from the new series, with internal Faraday shield |
| MTN/2287 | Accelerometer from the new series for monitoring, current output |
| MTVS0004 | Vibration switch with alarm relays, according to ISO 10816 |
| MTN/VM220 | Portable vibration meter according to ISO 10816-3, 100 readings stored |
| LVDT Industrial | Displacement transducers, ±0.5 to ±550 mm, IP65 or IP68 |
Where is Monitran equipment used?
- Pulp and paper — vibration monitoring on rotating machines and fans
- Water treatment — protection of pumps and blowers through sensors and switches
- Wind energy — sensors for the drive train and gearboxes
- Oil and gas — accelerometers with Ex approvals on rotating equipment
- Mining, food and pharmaceutical — condition monitoring on lines and process plants
How do we supply Monitran in Romania?
We can quote Monitran sensors and systems based on the full code on the existing sensor, for example MTN/1185 or MTN/2287 with the connector suffix. We supply the products to order, usually in 1–4 weeks; the lead time is confirmed in the quotation and may be longer for special or Ex-approved variants. To identify a replacement, send the code, the sensitivity, the connector or cable type, the cable length and the required output (AC or 4–20 mA), together with the operating environment: temperature, Ex zone, IP protection level.
Direct replacement of another manufacturer's model with a Monitran sensor is confirmed after comparing the datasheet, based on the factory's confirmation.
Frequently asked questions about Monitran
What products does Monitran make?
Monitran manufactures in the United Kingdom accelerometers, velocity sensors, LVDTs, eddy current probes, portable vibration meters and vibration switches. The company is privately owned and was founded in 1986, and besides the standard products it develops custom sensors for OEM customers.
How do I choose between an accelerometer for analysis and one for monitoring?
For spectral analysis with a portable data collector or an online analyser, a sensor with AC output is used, such as the 1100 or 2200 series. For a continuous signal to a PLC or DCS, choose a sensor with current-loop output, such as 1185, 1187, 2285 or 2287. Send us the input type of your system.
Can you supply Monitran sensors in Romania and within what time?
Yes. Standard models are ordered and usually arrive in 1–4 weeks. Sensors with Ex approvals or with a special cable and connector may take longer. The final lead time appears in the quotation, once the full code has been checked.
Can I replace an existing vibration sensor with a Monitran one?
It can be assessed on the basis of sensitivity, frequency range, output, connector and mounting thread. Equivalence is confirmed only with these data. If the old sensor is from another manufacturer, send us the datasheet or a photo of the nameplate, so we can check the fit.
What should I send for a quotation on an LVDT or a vibration switch?
For an LVDT, the required stroke, the output (4–20 mA, 0–10 V or AC), the operating temperature, the IP level and the cable length. For a vibration switch, the desired alarm and trip levels, the supply voltage and the type of machine it is mounted on.
How do I request a Monitran quotation?
Send the Monitran code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Monitran Ltd (manufacturer documentation)

