Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Opkon supplier in Romania

For Opkon we quote long- and short-stroke linear potentiometers, magnetostrictive sensors with analogue or digital output, draw-wire sensors, rotary encoders and OPTC 24 and OPTC 27 pressure transducers; we need the stroke, the output and the mounting.

Headquarters: Istanbul, Turkey

Request a quote

Who is Opkon and what does it make?

Opkon is a manufacturer of position sensors based in Istanbul. The range covers linear potentiometers, contactless magnetostrictive sensors, mobile hydraulics sensors, magnetic linear encoders, rotary encoders, draw-wire sensors, indicators and controllers, control modules for hot runners, pressure transducers and converters from analogue signal to digital bus. They are used on machinery, presses, injection machines and production lines where a stroke or an angle has to be converted into an electrical signal.

Linear potentiometers have two mechanical versions. The long-stroke ones cover 30–1950 mm, with resistances of 5, 10 or 20 kΩ depending on length, and the compact short-stroke ones cover 10–400 mm. There are also versions with an internal converter, with a 4–20 mA, 0–20 mA or 0–10 V output, and digital versions with CANopen, ProfiBUS, EtherCAT, SSI or CANBUS. Contactless magnetostrictive sensors measure between 100 and 5000 mm, with 16-bit resolution and a 24 V DC supply.

Rotary encoders are divided into incremental magnetic ones, with 40, 50 or 58 mm housings and 4–512 pulses per revolution, incremental optical ones, with housings of up to 100 mm and 100–5000 pulses per revolution, and absolute feedback-type encoders for gearless synchronous motors, with a BiSS or SSI interface. Draw-wire sensors have strokes of 500, 900, 1800 or 3600 mm in the potentiometer version, and the OPTC 24 and OPTC 27 transducers measure pressures between 10 and 400 bar, with IP65 protection.

What do we supply from the Opkon range?

ProductDescription
Linear potentiometersTwo families: long stroke of 30–1950 mm and compact short stroke of 10–400 mm. Repeatability is below 0.01 mm, and the long-stroke version withstands 100 million movements. Versions with an internal converter or a digital bus also exist.
Contactless magnetostrictive sensorsThey measure between 100 and 5000 mm with 16-bit resolution and a 0–10 V, 0–20 mA or 4–20 mA output. The digital version, for mobile hydraulics, uses CANbus, CANopen, EtherCAT, Modbus or ProfiBUS.
Rotary encodersIncremental magnetic encoders of 4–512 pulses per revolution and incremental optical encoders of 100–5000 pulses per revolution, with a speed of up to 3500 rev/min. The outputs are push-pull, TTL or HTL; an absolute encoder for synchronous motors also exists.
Draw-wire sensorsThe potentiometer version has strokes of 500, 900, 1800 and 3600 mm, with 5 or 10 kΩ or an internal converter. The encoder version offers strokes of 500–3600 mm, a resolution of 50 or 25 µm and a push-pull, TTL or HTL output.

Why Opkon?

  • Linear potentiometers from 10 to 1950 mm — the stroke is chosen from two mechanical families, with resistance matched to length
  • Analogue or digital outputs for the same measurement — the machine interface is kept, from 4–20 mA to CANopen or EtherCAT
  • Contactless magnetostrictive sensors of up to 5000 mm — they have no parts that wear by friction, useful on hydraulic cylinders
  • Encoders from 40 to 100 mm in diameter — the housing fits the seat on the motor or the shaft
  • OPTC 24 and 27 transducers with IP65 — for pressures of 10–400 bar in hydraulic circuits

Which Opkon codes and series are requested most often?

CodeDescription
OPTC 24Pressure transducer, 10–400 bar, IP65
OPTC 27Pressure transducer, 10–400 bar, IP65
Linear potentiometerLinear potentiometer, stroke 10–1950 mm
Magnetostrictive sensor with analogue outputMagnetostrictive sensor, 100–5000 mm
Magnetostrictive sensor with digital outputMagnetostrictive sensor with digital output
Mobile hydraulics sensorMobile hydraulics sensor, 100–5000 mm
Magnetic linear encodersMagnetic linear encoder
Rotary encoderMagnetic, optical or absolute rotary encoder
Draw-wire sensorDraw-wire sensor, 500–3600 mm
Hot runner moduleControl module for hot runners

Where is Opkon equipment used?

  • Mobile hydraulics — magnetostrictive sensors for cylinder position on construction machinery
  • Presses and injection machines — stroke measurement with linear potentiometers, plus modules for hot runners
  • Industrial automation — incremental encoders on axes and conveyors
  • Gearless synchronous motors — absolute feedback-type encoders with BiSS or SSI
  • Hydraulic installations — OPTC 24 and OPTC 27 transducers for medium and high pressures

How do we supply Opkon in Romania?

From the Opkon range we can quote position sensors, encoders and pressure transducers, including spare parts for installations in operation. For an exact quotation, send the type of sensor, the stroke or range, the output signal (analogue or bus), the supply voltage and the mounting method; for encoders, add the number of pulses and the housing diameter. Items are supplied to order, usually in 1–4 weeks; depending on the specification, the lead time may be longer, and the date is confirmed in the quotation.

The families are identified by type and parameters, so we check the exact configuration with you before confirming the item.

Frequently asked questions about Opkon

What types of position sensors does the Opkon range include, from linear potentiometers to draw-wire sensors?

Opkon is a company from Istanbul that makes position sensors: linear potentiometers, magnetostrictive sensors, linear and rotary encoders, draw-wire sensors and pressure transducers. The range also includes indicators, controllers and converters from analogue signal to digital bus, used on machinery and production lines.

How do I choose between a linear potentiometer and a magnetostrictive sensor?

The linear potentiometer covers strokes of 10–1950 mm and has repeatability below 0.01 mm. The magnetostrictive sensor is contactless and measures between 100 and 5000 mm, with 16-bit resolution. Send the stroke, the output required and the mounting method, and we check the suitable family.

How quickly do you bring Opkon sensors to Romania?

Usually within 1–4 weeks of the order: Opkon sensors are supplied to order, and a sensor can ship in 24–72 h when the item is in stock, locally or at the supplier. For special specifications, the interval may be longer.

Can I replace an old encoder with an Opkon encoder?

It depends on the housing diameter (40, 50, 58, 80 or 100 mm), the shaft type (solid, semi-hollow or hollow), the number of pulses and the output (push-pull, TTL or HTL). Send the nameplate of the current encoder, and we check whether an Opkon version matches mechanically and electrically.

What data do I send for an OPTC 24 or OPTC 27 pressure transducer?

For OPTC 24 or OPTC 27, send the pressure range required (within 10–400 bar), the output signal (0–10 V, 0–20 mA or 4–20 mA), the supply voltage available, the connection thread and the fluid measured. If you have an existing transducer, a photo of the nameplate speeds up the check.

How do I request a Opkon quotation?

Send the Opkon code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Opkon (manufacturer documentation)