Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Mono supplier in Romania

For Mono we quote EZstrip and Compact C progressive cavity pumps, hygienic pumps, Muncher grinders and wear parts; we need the nameplate code, the fluid pumped and the solids content.

Request a quote

Who is Mono and what does it make?

Mono makes progressive cavity pumps (eccentric screw pumps) for sludges, viscous liquids, shear-sensitive products and fluids with solids, plus twin-shaft grinders (Muncher) that protect pumps and downstream equipment. For a quotation, send us the pump code from the nameplate (for example Z36A or Z38K), the serial number, the fluid, the flow and the discharge pressure.

The EZstrip transfer pump has a patented split coupling, which allows the whole drive train (rotor, stator, shaft, connecting rod and seal) to be removed without taking the pump out of the pipeline and without disconnecting the motor electrically. The suction and discharge connections stay connected to the pipeline, and the EZstator clamps hold the stator without tie bars, which shortens stator removal time by more than 50%. EZstrip reaches 225 m³/h, 12 bar and −10…+100 °C, is made of cast iron or stainless steel, with rotor and stator materials chosen according to the application, and can also be fitted to existing installations with Compact C pumps or pumps from the B range. EZstrip and 2000 Series pumps are also available with Scion technology, which is shorter and lighter, with a gear joint or a pin joint.

The range also includes Compact C pumps, designed for small installation spaces, and hygienic pumps for food products, where gentle low-shear pumping matters. For wastewater there are the Series A Muncher, EZstrip TR Muncher and SB Muncher grinders, with two shafts, low speed and high torque, which shred solids and condition sludge before pumping. Typical applications are domestic and industrial effluents, milk of lime, sludges, latex emulsions, chemicals and detergents, starch suspensions, coating clays, gypsum and silicates, paper pulp and agricultural slurry.

What do we supply from the Mono range?

ProductDescription
EZstrip transfer pumpsProgressive cavity pumps with maintain-in-place servicing, up to 225 m³/h, 12 bar and −10…+100 °C. The models, from Z34A to Z3BK, are made in a single stage or in two stages, in cast iron or stainless steel, and are serviced with an open-ended spanner and a hex key.
Compact C pumpsProgressive cavity pumps of compact construction, for tight installation spots, operating at the application's maximum requirements. On installations with existing Compact C pumps it is possible to move to the EZstrip design, with servicing without removal from the pipeline.
Hygienic progressive cavity pumpsProgressive cavity pumps with a gentle pumping action, for food products with solids and shear-sensitive products, where the pieces must reach the next stage undamaged. They meet the cleanliness requirements of food production.
Muncher grindersTwin-shaft grinders with low speed and high torque (Series A Muncher, EZstrip TR Muncher, SB Muncher) for wastewater, sludge and industrial streams with solids. They can be supplied together with Mono pumps, as a shredding, screening or pumping system.

Why Mono?

  • Patented split coupling on EZstrip: the drive train is removed without taking the pump out of the pipeline
  • EZstator clamps without tie bars: stator removal time drops by more than 50%
  • Unchanged performance: the EZstrip design does not reduce the flow or pressure of the pump
  • Compatibility with existing Compact C and B range installations, including by retrofit
  • Muncher grinders with two shafts, low speed and high torque: protection of downstream pumps in wastewater and sludge

Which Mono codes and series are requested most often?

CodeDescription
EZstripProgressive cavity transfer pump, maintain-in-place servicing
Z34AEZstrip pump, A design
Z35KEZstrip pump, K design
Z36AEZstrip pump, A design
Z37BTwo-stage EZstrip pump, B design
Z38KEZstrip pump, K design
Z3BKHigh-flow EZstrip pump, up to 225 m³/h
Compact CCompact progressive cavity pump
2000 SeriesProgressive cavity pump from the 2000 series
ScionTechnology for shorter and lighter pumps
Series A MuncherTwin-shaft grinder for wastewater and sludge
EZstrip TR MuncherGrinder for shredding solids and conditioning sludge
SB MuncherGrinder for wastewater

Where is Mono equipment used?

  • Water and wastewater: Muncher grinders and EZstrip pumps for sludge and domestic effluents
  • Food industry: EZstrip pumps for sauces, fruit juices and milk curd, hygienic pumps for products with pieces
  • Chemicals: transfer of industrial chemicals, detergents and latex emulsions
  • Pulp and paper: pumping of paper pulp, starch suspensions and coating clays
  • Agriculture: transfer of agricultural slurry and suspensions

How do we supply Mono in Romania?

We can quote Mono EZstrip, Compact C and hygienic pumps, Muncher grinders and wear parts for pumps in service: rotors, stators, connecting rods, couplings and seals. The stator and rotor are chosen according to the fluid, so besides the code and serial number from the nameplate we need the name of the fluid, the solids content, the viscosity, the temperature, the flow and the discharge pressure. Pumps are supplied to order, usually 1–4 weeks; stators and rotors can ship in 24–72 h when the item is in stock, locally or at the supplier.

Availability of Mono pumps and parts is checked on each request, before the quotation. For old Mono pumps with a worn nameplate, we identify the stator and rotor from the dimensions and from photos of the pump; installation and commissioning remain with your team.

Frequently asked questions about Mono

What does Mono make?

Mono makes progressive cavity pumps (eccentric screw pumps): the EZstrip transfer pump, Compact C pumps, 2000 Series pumps and hygienic pumps for the food industry. The range also includes Muncher twin-shaft grinders for wastewater and sludge, which protect pumps and downstream equipment.

How do I choose a Mono progressive cavity pump?

We start from the fluid: viscosity, solids content and size, abrasiveness and temperature. Then we determine the flow and the discharge pressure, on which the number of stages and the size of the pump depend; EZstrip reaches 225 m³/h and 12 bar. The stator and rotor material is chosen according to chemical compatibility with the fluid.

Do you supply Mono pumps and parts in Romania and how quickly?

Yes. Mono pumps are supplied to order, usually in 1–4 weeks. Stators, rotors and seals can ship in 24–72 h when the item is in stock, locally or at the supplier. For large pumps or those with special stator materials, depending on the specification, the lead time may be longer.

Can I convert an existing Mono pump to the EZstrip design?

Yes, the EZstrip design can be fitted as a new pump or by retrofit on existing installations with Compact C or B range pumps, with the connections staying connected to the pipeline. Send us the code and serial number from the nameplate of the current pump, so that we can check the corresponding EZstrip model.

What should I send for a quotation on a Mono stator?

Send the pump code and serial number from the nameplate, the fluid pumped, the temperature and any chemical additives, so that we can choose the suitable elastomer. If the nameplate is missing, measure the length and outside diameter of the stator and photograph the ends. Tell us also how long the old stator lasted; it helps us choose the material.

How do I request a Mono quotation?

Send the Mono code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: NOV (manufacturer documentation)