Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Northern Pump supplier in Romania

For Northern Pump we quote rotary gear pumps from the 4900 series for crude oil transfer, the high-pressure 4000 series, vertical pumps for collector sumps and the NPC series for flow without pulsation; we need the fluid and the pressure.

Founded in 1929 · Headquarters: Grantsburg, Wisconsin, USA

Request a quote

Who is Northern Pump and what does it make?

Northern Pump is an American builder of high-pressure rotary gear pumps, headquartered in Grantsburg, Wisconsin, producing positive displacement pumps since 1929. Gear pumps give a nearly constant flow at high pressures and are used in oil and gas, in chemical processes and on coating lines.

The 4900 series is intended for crude oil transfer. The casing is steel, and the pump works at discharge pressures up to 1440 PSI, with internal clearances adapted to each application, so that losses through internal leakage are minimal with both low-viscosity and very viscous fluids. It is installed compactly, in LACT units (automatic crude oil transfer with metering), in pipeline pumping stations and on offshore platforms.

The 4000 series reaches discharge pressures up to 2000 PSI, with a hydraulically balanced version for inlet pressures up to 1200 PSI, and gives a flow nearly free of pulsation. Vertical pumps for crude oil collector sumps use the same technology, in a single unit configured according to the depth of the sump. The NPC series, with six sizes between 0.5 and 15 cm³ per revolution, is used for coatings and precise dosing. For a quotation send the fluid, the viscosity, the pressure and the flow rate.

What do we supply from the Northern Pump range?

ProductDescription
4900 series for crude oil transferRotary gear pump, with a steel casing, for discharge pressures up to 1440 PSI. It is used for the transfer and metering of crude oil, in LACT units, in pipeline pumping stations and in refineries, with low- or high-viscosity fluids.
4000 series, high pressureGear pumps for discharge pressures up to 2000 PSI and nearly pulsation-free flow. The hydraulically balanced version accepts inlet pressures up to 1200 PSI, useful in systems with difficult or fluctuating suction conditions.
Vertical pumps for collector sumpsIntegrated vertical units, based on the technology of horizontal pressure-boosting pumps, for emptying collector sumps from crude oil pipelines. They are configured according to the depth of the sump and work at line pressures up to 1440 PSI.
NPC series for coatingsFine helical gear pumps, for pulsation-free flow, in six sizes between 0.5 and 15 cm³ per revolution. The body is 316 stainless steel, and the maximum pressure is 100 PSI; they are dismantled and cleaned quickly, with few tools.

Why Northern Pump?

  • Steel casing on the 4900 series — it withstands discharge pressures up to 1440 PSI in crude oil transfer
  • Internal clearances adapted to each application — losses through internal leakage fall with fluids of different viscosities
  • 4000 series with a hydraulically balanced version — it accepts high inlet pressures, in systems with variable suction
  • Nearly pulsation-free flow — it puts less stress on pipes, measuring devices and the other components of the installation
  • NPC series with fine helical gears — it gives a uniform flow in coatings, adhesives and precise dosing

Which Northern Pump codes and series are requested most often?

CodeDescription
4900Rotary gear pump for crude oil transfer, up to 1440 PSI
4000High-pressure pump, up to 2000 PSI, nearly pulsation-free flow
VerticalVertical pump for crude oil collector sumps, up to 1440 PSI
NPCFine helical gear pump for coatings
NPC 0.5 cm³/rot0.5 cm³ size of the NPC series
NPC 1 cm³/rotSize from the NPC series
NPC 3 cm³/rotSize from the NPC series
NPC 5 cm³/rotSize from the NPC series
NPC 10 cm³/rotSize from the NPC series
NPC 15 cm³/rot15 cm³ size of the NPC series

Where is Northern Pump equipment used?

  • Oil and gas — crude oil transfer and metering, pressure-boosting stations
  • Refineries — hydrocarbon transfer in process installations
  • Offshore platforms — pumping in confined spaces
  • Chemical industry — process fluids and molten sulphur
  • Coating lines and lithium-ion batteries — uniform dosing onto a slot die

How do we supply Northern Pump in Romania?

We can quote Northern Pump gear pumps from the 4900, 4000, vertical and NPC series, as well as custom pumps for equipment manufacturers. For a correct quotation send the fluid pumped, the viscosity, the temperature, the suction and discharge pressures, the flow rate and the type of drive. Pumps are supplied to order, usually in 1–4 weeks; units with a special configuration can take longer, and the lead time is confirmed in the quotation.

Other types of crude oil pump are checked separately, based on your process data.

Frequently asked questions about Northern Pump

What kind of pumps does Northern Pump make?

Northern Pump builds rotary gear pumps for high pressures: the 4900 series for crude oil, the 4000 series, vertical pumps for collector sumps and the NPC series for coatings. The headquarters is in Grantsburg, Wisconsin, and the company has produced positive displacement pumps since 1929.

Which pump suits a viscous fluid at high pressure?

Gear pumps give a nearly constant flow at high pressure. The 4900 series is made for hydrocarbons of low or high viscosity, and the 4000 series reaches discharge pressures up to 2000 PSI. Send the viscosity at working temperature, the flow rate and the pressure, and we check the series.

Do you supply Northern Pump in Romania, and how fast?

Yes. The usual lead time is 1–4 weeks, to order; items can ship in 24–72 h when the item is in stock, locally or at the supplier. For special configurations, the lead time can be longer. You receive the exact date in the quotation, after you send us the data.

What is the difference between the 4900 series and the vertical pumps?

The 4900 series is mounted horizontally, in LACT units and pumping stations, while vertical pumps are lowered into a crude oil collector sump, as an integrated unit. Both work at line pressures up to 1440 PSI. Send the layout of the installation and the depth of the sump to check the version.

What data do I send for a Northern pump from the 4900, 4000 or NPC series?

Send the series from the nameplate or, for a new pump, the fluid, the viscosity and the temperature, the suction and discharge pressures, the flow rate and the type of drive. For the NPC series add the size wanted, in cm³ per revolution, and the materials that come into contact with the fluid. The 4900 series is for crude oil transfer, up to 1440 PSI, and the 4000 series is high-pressure, up to 2000 PSI.

How do I request a Northern Pump quotation?

Send the Northern Pump code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Northern Pump (manufacturer documentation)