Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Packo Inox supplier in Romania

For Packo Inox we quote FP, NP and ICP centrifugal pumps, ZL and ZLC lobe pumps, ZP and ZS pumps and mixing pumps, starting from the fluid, viscosity, flow rate, pumping head and working temperature.

Headquarters: Diksmuide, Belgium

Request a quote

Who is Packo Inox and what does it make?

Packo Inox is a Belgian manufacturer with its factory in Diksmuide, specialising in stainless steel pumps for hygienic and industrial applications. It has designed pumps since 1975, at first for the dairy industry, which is also where the standard electrochemical treatment, electropolishing, comes from. The range includes centrifugal pumps (sanitary, general industrial, pharmaceutical and mixing series), rotary lobe, circumferential piston and twin-screw pumps, as well as hygienic stainless steel components and surface treatment.

The FP sanitary centrifugal pumps (FP60, FP1, FP2, FP3 and MFP2) and the NP60, ICP1, ICP2, ICP3 and MCP2 industrial ones reach 1,800 m³/h and 220 m water column. FP60 has 40 m³/h and 95 °C, and FP1 70 m³/h and 140 °C. The pharmaceutical series (PHP2, PRP2) and the high-shear mixing series (SFP2, SFP3, CM, PM) complete the offer. The ZL and ZLC lobe pumps work at 100 m³/h, 20 bar, 150 °C and viscosities up to 1,000,000 cP; ZP, with circumferential piston, has a 38 mm connection, and ZS, with twin screws, reaches 12 bar and 3,000 rpm. Motor dimensions comply with IEC.

Applications are in dairies, breweries and beverage plants, distilleries, filtration, pasteurisation, evaporation, yeast propagation and CIP (clean-in-place) washing, as well as in the pharmaceutical industry. The range of components includes milk pumps, receiving and buffer tanks, filters, collectors, tubular heat exchangers and mixers. The offer starts from the fluid, viscosity, flow rate, pumping head, temperature and hygiene requirements.

What do we supply from the Packo Inox range?

ProductDescription
FP sanitary centrifugal pumpsSeries for dairies, beer, beverages and distilleries: FP60 (40 m³/h, 27 m, 95 °C), FP1 (70 m³/h, 37 m, 140 °C), FP2, FP3 and MFP2. They are used in filtration, pasteurisation, evaporation, yeast propagation and in CIP circuits. The design follows hygiene requirements specified in the manufacturer's documentation.
NP, ICP and MCP industrial centrifugal pumpsGeneral industrial series with close-coupled design and standardised components: NP60, ICP1, ICP2, ICP3 and MCP2. The series reaches 1,800 m³/h and 220 m water column, with inlet pressure up to 20 bar, depending on the type.
ZL and ZLC rotary lobe pumps and ZP circumferential pumpsPositive displacement pumps for viscous and sensitive products: ZL and ZLC at 100 m³/h, 20 bar and 150 °C, with approvals according to the manufacturer's documentation; ZP, with circumferential piston, up to 15 bar and 800 rpm, with a 38 mm connection on one of the sizes.
ZS twin-screw pumps, mixers and pharmaceutical pumpsZS combines the advantages of lobe pumps and centrifugal pumps, up to 12 bar and 3,000 rpm. The SFP2, SFP3, CM and PM mixing pumps develop high shear, while PHP2 and PRP2 are intended for sterile applications in the pharmaceutical industry.

Why Packo Inox?

  • Electropolished centrifugal pumps as standard — an easy-to-clean surface in applications with CIP (clean-in-place) and SIP (sterilise-in-place)
  • Four centrifugal series — sanitary FP, industrial NP/ICP/MCP, pharmaceutical PHP/PRP and mixing SFP/CM/PM, all in hygienic design
  • Positive displacement pumps — rotary lobe ZL/ZLC up to 20 bar, circumferential piston ZP and twin-screw ZS for viscous fluids
  • High viscosities — lobe pumps reach 1,000,000 cP, and the centrifugal pumps of the FP1 series work up to 1,000 cP at 140 °C
  • Hygienic stainless steel components — receiving and buffer tanks, filters, collectors, tubular heat exchangers and mixers

Which Packo Inox codes and series are requested most often?

CodeDescription
FP60Sanitary centrifugal pump, 40 m³/h, 95 °C
FP1Sanitary centrifugal pump, 70 m³/h, 140 °C
FP2Sanitary centrifugal pump, up to 220 m water column
FP3Sanitary centrifugal pump, up to 120 m water column
MFP2Sanitary centrifugal pump, MFP2 type
NP60Industrial centrifugal pump, 40 m³/h
ICP1Close-coupled industrial centrifugal pump, 70 m³/h
ICP2Industrial centrifugal pump, up to 220 m water column
PHP2Pharmaceutical centrifugal pump
PRP2Pharmaceutical centrifugal pump, PRP2 type
SFP2High-shear mixing pump
ZLRotary lobe pump, 100 m³/h, 20 bar
ZLCRotary lobe pump, hygienic variant
ZPCircumferential piston pump, up to 15 bar
ZSTwin-screw pump, up to 12 bar, 3,000 rpm

Where is Packo Inox equipment used?

  • Dairies — sanitary pumps, milk pumps, receiving and buffer tanks
  • Breweries and beverage plants — filtration, pasteurisation, yeast propagation and CIP washing
  • Distilleries — product transfer in hygienic installations
  • Pharmaceutical industry and biotechnology — PHP and PRP pumps for sterile applications
  • General industry — NP, ICP and MCP pumps, mixers and surface treatment of stainless steel

How do we supply Packo Inox in Romania?

From the Packo Inox range we can quote FP, NP, ICP and MCP centrifugal pumps, ZL and ZLC lobe pumps, ZP and ZS pumps and spare parts for existing pumps. Pumps are configured to order, so they are supplied to order, usually in 1–4 weeks; depending on the specification, the lead time can be longer. For a quotation, send the pump type and the code on the plate, the fluid, viscosity, temperature, flow rate and pumping head, the seal material and, for a new project, the hygiene standard required.

Surface treatment for customer parts (electropolishing, pickling, passivation) is contracted separately and is outside our offer.

Frequently asked questions about Packo Inox

What does Packo Inox make?

Packo Inox makes stainless steel pumps for hygienic and industrial applications: sanitary, industrial, pharmaceutical and mixing centrifugal pumps, rotary lobe, circumferential piston and twin-screw pumps, plus hygienic components and surface treatment. The factory is in Diksmuide, Belgium.

How do I choose between a centrifugal pump and a rotary lobe pump?

A centrifugal pump suits low-viscosity fluids at high flow rates, and a rotary lobe pump suits viscous or shear-sensitive products: ZL and ZLC handle up to 1,000,000 cP. Viscosity, flow rate, pressure and temperature decide. Send this data and the fluid pumped.

Do you supply Packo pumps in Romania and how fast?

Yes. For parts, the lead time is 24–72 h when the item is in stock, locally or at the supplier; pumps are usually supplied to order, in 1–4 weeks. Pumps are configured to order, and depending on the specification the lead time can be longer; it is given in the quotation.

Can I replace a Packo pump with a current type from another series?

Replacement is checked case by case. Type, rotor diameter, connections, seal material, motor and hygiene standard all matter. Send the code on the plate, the year of manufacture and the working conditions, and we check the suitable type before the quotation.

What data do I need to send for a quotation on an FP sanitary pump?

We need the fluid and its viscosity, the flow rate, the pumping head, the temperature, the inlet pressure, the seal material, whether the pump works in CIP or SIP circuits and the motor voltage. For a new project, also send the hygiene standard required (3A or EHEDG).

How do I request a Packo Inox quotation?

Send the Packo Inox code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Packo Inox (manufacturer documentation)