NASH supplier in Romania
For NASH we quote 2BV7, 2BE1, Vectra XL and CL liquid ring vacuum pumps, AT and TC two-stage pumps and spare parts; we need the model, the series, the suction flow rate and the vacuum level.
Who is NASH and what does it make?
NASH makes liquid ring vacuum pumps and compressors, steam ejectors and complete vacuum and compression systems for industrial processes. Liquid ring pumps also work with explosive gases or corrosive vapours, which is why they are used in energy, chemicals, oil and gas, paper, mining, biogas, as well as in carbon capture and hydrogen compression. For a quotation, send us the model and series from the nameplate, the suction flow rate, the vacuum level required and the sealing liquid available.
The small pumps (vacuum of up to 29 inches of mercury, 1.5–10 HP) have a monobloc or lantern design: Vectra SX, 2BV5, 2BV6, 2BV7 and the magnetic-coupling versions 2BM1 and 2BM5, with no leakage at the shaft, for applications where safety requires complete sealing. The medium pumps (up to 28 inches of mercury, 10–200 HP) – SC, 2BE1, Vectra GL and Vectra XL – are made of cast iron for less aggressive media or stainless steel for aggressive media. The large pumps (up to 25 inches of mercury, over 200 HP) – CL, 905, 2BE4 and P2620 – work in paper dewatering, in vacuum filtration of ores and in energy, some models having a polyisoprene lining.
The two-stage pumps AT, in cast iron, and TC, in ductile iron or stainless steel, have NASH conical ports, go down to 0.8 inches of mercury absolute and are combined with ejectors or boosters in hybrid packages for a higher vacuum; AT is intended in particular for power plants. Liquid ring compressors compress hard-to-handle gases, including hydrogen, and the steam ejectors are built to HEI (Heat Exchange Institute) standards. Complete systems are delivered ready to run, easy to integrate into process automation.
What do we supply from the NASH range?
| Product | Description |
|---|---|
| Small Vectra SX, 2BV and 2BM pumps | Monobloc or lantern pumps, 1.5–10 HP, with a vacuum of up to 29 inches of mercury: Vectra SX, 2BV5, 2BV6, 2BV7 with high water-handling capacity and the magnetic-coupling versions 2BM1 and 2BM5. |
| Medium SC, 2BE1 and Vectra pumps | Single-stage vacuum pumps and compressors, 10–200 HP, for oil and gas, chemicals and general industry, in cast iron or stainless steel: SC, 2BE1, Vectra GL and Vectra XL. |
| Large CL, 905, 2BE4 and P2620 pumps | Single-stage pumps, over 200 HP, for heavy-duty conditions: dewatering in paper mills, vacuum filtration of ores, power plants and chemicals, in stainless steel, cast iron or with a polyisoprene lining. |
| AT and TC two-stage pumps | Pumps with conical ports that reach 0.8 inches of mercury absolute: AT in cast iron, intended in particular for power plants, and TC in ductile iron or stainless steel, which can be combined with ejectors or boosters. |
Why NASH?
- Liquid ring pumps for explosive gases and corrosive vapours — safety in chemical processes
- 2BM1 and 2BM5 magnetic-coupling versions — no leakage at the shaft
- Range from 1.5 HP to over 200 HP and two stages down to 0.8 inches of mercury absolute
- Hybrid packages with ejectors and boosters — a higher vacuum than with the pump alone
- Cast iron, ductile iron, stainless steel or polyisoprene lining — the material is chosen according to how aggressive the medium is
Which NASH codes and series are requested most often?
| Code | Description |
|---|---|
| Vectra SX | Liquid ring vacuum pump and compressor, small capacity |
| 2BV5 | Monobloc liquid ring vacuum pump, small capacity |
| 2BV7 | Liquid ring vacuum pump, high water-handling capacity |
| 2BM5 | Magnetic-coupling vacuum pump, leak-free |
| 2BE1 | Single-stage vacuum pump and compressor, 10–200 HP class |
| Vectra XL | Mid-range vacuum pump and compressor, up to 28 inches of mercury |
| CL | Vacuum pump and compressor, large capacity |
| 905 | Vacuum pump and compressor for heavy-duty applications |
| P2620 | Vacuum pump for paper, energy, mining and chemicals |
| AT | Two-stage vacuum pump, cast iron, conical ports |
| TC | Two-stage vacuum pump, ductile iron or stainless steel |
Where is NASH equipment used?
- Electric power — AT two-stage vacuum pumps for power plants
- Chemical industry — vacuum for explosive gases and corrosive vapours
- Paper industry — dewatering with high-capacity pumps
- Mining — vacuum filtration of ores
- Biogas and hydrogen — liquid ring compressors
How do we supply NASH in Romania?
We can quote NASH liquid ring vacuum pumps and compressors, spare parts (rotors, bearings, seals, cones) and components for vacuum systems. For identification we need the model and series from the nameplate; for a new application, the suction flow rate, the vacuum level or discharge pressure, the gas composition, the temperature and the sealing liquid available. We bring them in to order; common spare parts usually take 1–4 weeks, while large pumps and complete systems, depending on the specification, may take longer. The exact lead time is confirmed in the quotation.
A vacuum pump is sized based on the composition and temperature of the gas handled and the temperature of the sealing liquid available.
Frequently asked questions about NASH
What does NASH make?
NASH makes liquid ring vacuum pumps and compressors, in small, medium, large and two-stage versions, steam ejectors and hybrid packages, hydrogen compressors and complete vacuum and compression systems for energy, chemicals, oil and gas, paper and mining.
How do I choose a NASH liquid ring vacuum pump?
We start from the suction flow rate at working pressure, the vacuum level, the gas composition and temperature and the sealing liquid temperature. Small pumps reach 29 inches of mercury, medium ones 28 and large ones 25, and for 0.8 inches absolute the two-stage AT or TC pumps are used.
What lead time do NASH parts and pumps have?
NASH spare parts can ship in 24–72 h when the item is in stock, locally or at the supplier, and the others we bring in to order, usually in 1–4 weeks. For large pumps or complete systems, depending on the specification, the lead time may be longer.
Can you supply parts for an old NASH pump in our plant?
We work from the model and series on the nameplate: rotors, cones, bearings and seals. If the part is no longer available, we check which current model in the same flow and vacuum class can take over the position, with the same connections or minimal adaptations.
What data do I send for a NASH vacuum pump quotation?
The model and series of the existing pump or, for a new installation, the suction flow rate, the vacuum level, the gas composition, the temperature, the sealing liquid available, the material required (cast iron or stainless steel) and the motor voltage. For replacing an existing pump, the nameplate data help us keep the connections.
How do I request a NASH quotation?
Send the NASH code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: NASH (manufacturer documentation)

