Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

NiLAB supplier in Romania

For NiLAB we quote Green Drive Standard, ISO 15552 and Water linear motors, Standard L ironcore motors, NLiR rotary-linear motors and ULCO units; for a quotation we need the force, the stroke, the voltage and the feedback required.

Headquarters: Klagenfurt am Wörthersee, Austria

Request a quote

Who is NiLAB and what does it make?

NiLAB is an Austrian manufacturer based in Klagenfurt, which designs and manufactures tubular linear motors, ironcore linear motors, rotary-linear motors, linear axes, brushless servo motors, AC and DC servo drives and automation software. The tubular linear motor produces linear motion directly, with permanent magnets, without a ball screw, belts or gearboxes, which simplifies the mechanics of a positioning axis.

The Green Drive Standard series has an AISI 304 stainless steel slider and an IP65 motor body, with coils, position and temperature sensors and an electronic file with the motor parameters. It has nine sizes, with a peak force of up to 1160 N, and windings for 230/480 VAC or 24/48 VDC. The Green Drive ISO 15552 series has six sizes, with flanges from 45×45 to 70×70 mm, and is used to replace pneumatic cylinders. The Green Drive Water version has integrated water cooling, and the nominal force doubles. The Standard L ironcore motors have seven primary sizes, with continuous forces from 150 to 7500 N and peak forces from 440 to 15750 N, coated with epoxy resin.

Rotary-linear motors combine, in a single body, a tubular motor and a rotary motor; NLiR has a 35 mm flange, two integrated drives and is controlled through MODBUS RTU, CANopen, EtherCAT or digital inputs. The range is applied in the food and beverage, pharmaceutical, woodworking, paper and textile industries and in machine tools, usually as an electric replacement for pneumatic cylinders or as a direct positioning axis. The ULCO linear units are modules with an aluminium profile and T-slots for M5, M6 and M8 nuts.

What do we supply from the NiLAB range?

ProductDescription
Green Drive (Standard, ISO 15552, Water, N)Tubular linear motors with an AISI 304 stainless steel slider and an IP65 body, from 24/48 VDC to 230/480 VAC. Standard has nine sizes, up to 1160 N at peak; ISO 15552 is mounted in place of pneumatic cylinders; Water adds water cooling; N is supplied as a rod and housing set.
Ironcore linear motors (Standard L, Hygienic L, Secondary L)Flat ironcore motors, for high-force axes. Standard L gives 150–7500 N continuous; Hygienic L has a stainless steel housing, IP67 and optional water cooling, for 128–3060 N; Secondary L is the magnet track, in segments of 64–1024 mm.
Green Drive Rotolinear and NLiR rotary-linear motorsA tubular linear motor and a brushless rotary motor in a single assembly, controlled separately or in interpolation, for screwing, capping or pick and place with rotation. NLiR has a 35 mm flange, two integrated drives and a 24 VDC supply.
ULCO linear units, servo drives and softwareThe ULCO units (sizes 44, 66, 88 and 132) are modular axes made of aluminium profile with T-slots. The range also includes MBM brushless servo motors, Epulse and Xtrapuls servo drives, controllers and the EPULSE Starter and NiLAB Starter software.

Why NiLAB?

  • Tubular motor with permanent magnets, without a screw, belt or gearbox — direct linear motion on the positioning axis
  • Green Drive ISO 15552 in six sizes, with flanges of 45×45 to 70×70 mm — replaces pneumatic cylinders without changing the mounting interface
  • Green Drive Water — integrated water cooling, at which the nominal force doubles compared with the uncooled version
  • NLiR rotary-linear motors — rotation and linear travel controlled independently, through MODBUS RTU, CANopen or EtherCAT
  • Ironcore Standard L, 150–7500 N continuous — high force on long axes, with the secondary in segments of 64 to 1024 mm

Which NiLAB codes and series are requested most often?

CodeDescription
Green Drive StandardTubular linear motor, nine sizes, up to 1160 N at peak
Green Drive ISO 15552Tubular linear motor in six sizes, 45×45 to 70×70 mm
Green Drive ISO IP69KGreen Drive ISO tubular linear motor, IP69K version
Green Drive WaterThree-phase tubular linear motor with water cooling
Green Drive NTubular linear motor supplied as a rod and housing set
Green Drive Rotolinear (GDR)Tubular motor and rotary motor in one assembly
NLiRMiniaturised rotary-linear motor, 35 mm flange, 24 VDC
Green Picker 2DRobot with two Green Drive motors, parallel kinematics
Ironcore Standard LFlat linear motor, 150–7500 N continuous
Ironcore Hygienic LFlat stainless steel linear motor, IP67, 128–3060 N
Ironcore Secondary LMagnet track, segments of 64–1024 mm
MCSSMini linear axis with ball guide and tubular motor
ULCO 44/66/88/132Modular linear unit with aluminium profile
MBMBrushless servo motor
Epulse30/50Servo drive
XtrapulsCD1Servo drive

Where is NiLAB equipment used?

  • Food and beverage industry — direct linear axes and versions for wet environments
  • Pharmaceutical industry — linear motors in treated housings, for packaging machines
  • Woodworking, paper and textile industries — positioning axes with ironcore motors
  • Machine tools — high-force linear axes and dedicated servo drives
  • Packaging and assembly lines — rotary-linear motors for screwing and closing

How do we supply NiLAB in Romania?

We can quote Green Drive tubular linear motors, ironcore and rotary-linear motors, ULCO units, servo drives and NiLAB accessories. We supply the products to order, and depending on the specification the lead time may be longer; we confirm the date in the quotation. For an accurate request, send the full code of the motor or drive, the supply voltage, the continuous and peak force required, the stroke, the type of feedback wanted and, when replacing a pneumatic cylinder, the mounting dimensions.

Whether a linear motor achieves the required motion cycle is determined by sizing the axis according to the manufacturer's documentation, based on the speed profile and the axis load.

Frequently asked questions about NiLAB

What does NiLAB make?

NiLAB manufactures in Austria tubular, ironcore and rotary-linear motors, linear axes, brushless servo motors, AC and DC servo drives and automation software, for machine automation with direct positioning. The range is used in packaging machines, assembly machines and industrial positioning axes.

How do I choose a Green Drive motor to replace a pneumatic cylinder?

The ISO 15552 series is designed to replace pneumatic cylinders; it has six sizes, with flanges from 45×45 to 70×70 mm. We identify the suitable size according to the force required, the stroke, the motion cycle and the voltage (24/48 VDC or 230/480 VAC). Send the data of the current cylinder and the speed profile.

Do you supply NiLAB linear motors in Romania, and how quickly?

Yes, the motors and drives come to order. The lead time may be longer than for catalogue components, because it depends on the specification (stroke, winding, feedback); the exact date is confirmed in the quotation, once we receive the configuration.

Can I replace an older NiLAB linear motor with a current series?

Only after checking: we need the code on the nameplate, the size, the winding (voltage), the type of feedback and the stroke. Interchangeability is confirmed from the data sent, because force and connection can differ between motors of the same size.

What details are needed for a quotation on an ironcore axis?

The continuous and peak force, the stroke, the maximum speed and acceleration, the moved mass, the environment (dust, liquids, water cleaning) and whether the axis is horizontal or vertical. On this basis the choice is made between Standard L and Hygienic L, as well as the number of Secondary L segments.

How do I request a NiLAB quotation?

Send the NiLAB code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: NiLAB GmbH (manufacturer documentation)