Ondrives supplier in Romania
For Ondrives we quote PSG spur gears, PGRR and PGRS racks, P-series worm gearboxes, BLH bevel gearboxes and EHD planetary gearboxes, based on the drawing or sample, the module, the number of teeth and the material.
Headquarters: Chesterfield, United Kingdom
Who is Ondrives and what does it make?
Ondrives is a British manufacturer of precision gears and gearboxes, with its factory in Chesterfield, in the county of Derbyshire. 90% of production is done in the company's own factory: tooth milling, grinding, turning and dimensional inspection. The quality system has certifications according to the manufacturer's documentation, and parts can be made to drawing, to sample or from catalogue items. The range is completed with couplings, synchronous belt pulleys, chain sprockets, fixing elements, linear guides and bearings.
The gear range covers straight and helical spur gears, pinions, racks, worms and worm wheels (including backlash-compensated ones), as well as spiral bevel and ground Zerol gears. Modules range from 0.2 to 12, manufacture follows ISO 1328 and DIN 3961, and the materials are stainless steel, alloy steel, brass and plastics. The teeth can receive crowning, tip and root relief or flank line correction. The gearboxes are worm gearboxes with shaft or flange input, crossed-axis, spiral bevel, hypoid, helical-bevel, offset parallel-shaft, epicyclic for servo motors, and planetary.
For a maintenance engineer or a designer, the interest is usually practical: a worn gear on an imported machine, for which no drawing exists any more, or a small precision gearbox for a positioning mechanism. In both cases the module, the number of teeth, the material, the bore and the transmission ratio matter, and identification of the item starts from these measured data or from the series code.
What do we supply from the Ondrives range?
| Product | Description |
|---|---|
| Straight and helical spur gears (PSG) | Precision gears in modules from 0.2 to 12, in stainless steel, alloy steel, brass or plastic, with crowning and flank correction options. The PSG series has, for example, module 0.5 with 18, 19 or 20 teeth in alloy steel. |
| Racks and pinions | Precision racks in module 0.5 and 1, in 303 stainless steel with round section (PGRR) or in En8 steel with square section (PGRS), together with shaft pinions, for linear motion guided by the gear. |
| Worms and worm wheels | Worm wheels in modules from 0.4 to 3, with 1 to 4 starts, in phosphor bronze or other materials on request, in standard or backlash-compensated versions, paired with ground stainless steel worms. |
| Worm, bevel and servo gearboxes | The P series with shaft input (from P15 to P85), BLH spiral bevel gearboxes, hypoid, planetary and EHD epicyclic gearboxes for servo motors. The rated torque and the centre distance or shaft diameter appear in the name of each series. |
Why Ondrives?
- In-house manufacture — 90% of production is done in the Chesterfield factory, from tooth cutting to grinding and inspection, and parts to drawing or sample are made in the same unit
- Ground gears — spur, helical, spiral bevel and Zerol gears with teeth finished by grinding, for transmissions with controlled noise and backlash
- Modules from 0.2 to 12 — the same factory makes both fine mechanisms and large-tooth wheels, in stainless steel, alloy steel, brass or plastic
- Gearboxes with the torques shown in the series name — from P15 (3.5 Nm) to P85 (200 Nm) for the worm ones and from EHD04 (7 Nm) to EHD16 (380 Nm) for the servo ones
- Quality with certifications according to the manufacturer's documentation — traceability per part, useful when a gear has to be remade to a drawing
Which Ondrives codes and series are requested most often?
| Code | Description |
|---|---|
| P15 | Worm gearbox with shaft input, 3.5 Nm, centre distance 15 mm |
| P30 | Worm gearbox with shaft input, 9 Nm, centre distance 30 mm |
| P60 | Worm gearbox with shaft input, 118 Nm, centre distance 64 mm |
| P85 | Worm gearbox with shaft input, 200 Nm, centre distance 85 mm |
| BLH20-BLHT20 | Spiral bevel gearbox, 1.77 Nm, Ø5 shafts |
| BLH70-BLHT70 | Spiral bevel gearbox, 128 Nm, Ø25 shafts |
| EHD04 | Planetary gearbox for servo, 7 Nm, ratio 3:1–6:1, Ø10 shaft |
| EHD08 | Planetary gearbox for servo, 50 Nm, ratio 3:1–6:1, Ø15 shaft |
| EHD16 | Planetary gearbox for servo, 380 Nm, ratio 3:1–6:1, Ø32 shaft |
| PSG0.5-18 | Straight spur gear, module 0.5, 18 teeth, alloy steel |
| PGRR0.5-400A | Rack with round section, module 0.5, 303 stainless steel |
| PGRS0.5-600A | Rack with square section, module 0.5, En8 steel |
Where is Ondrives equipment used?
- Servo motor drives — EHD planetary gearboxes with ratios between 3:1 and 36:1
- Robotics — planetary gearboxes with an output flange to ISO 9409
- Industrial machinery maintenance — gears, worms and pinions remade to drawing or sample
- Precision linear motion — racks and pinions in fine modules
- Aerospace — precision gears made under a quality system with certifications stated in the manufacturer's technical documentation
How do we supply Ondrives in Romania?
From the Ondrives range we quote gears and gearboxes: spur and bevel gears, worms and worm wheels, racks, P worm gearboxes, BLH bevel and EHD servo gearboxes, plus couplings, synchronous belt pulleys and chain sprockets from the rest of the range. We supply them to order; the lead time is usually 1–4 weeks and may be longer for parts made to drawing. For a correct quotation send us the drawing or sample, the module, the number of teeth, the material and hardness, the bore and the keyway. For gearboxes we need the ratio, the required output torque and the position of the shafts.
An existing gear can be remade when the original part or the drawing allows the module, the number of teeth, the material and the tolerances to be measured.
Frequently asked questions about Ondrives
What does Ondrives make?
Ondrives makes precision gears (spur, helical, bevel, worms and worm wheels, racks) and gearboxes in Chesterfield, United Kingdom: worm, bevel, hypoid, planetary and epicyclic gearboxes for servo motors. In addition, the range includes couplings, synchronous belt pulleys, chain sprockets, fixing elements, linear guides and bearings.
How do I choose between the P15 and P85 series of worm gearboxes?
Start from the torque required at the output and the centre distance available in the machine: P15 has 3.5 Nm at 15 mm, P45 has 40 Nm at 45.5 mm, and P85 has 200 Nm at 85 mm. Send us the desired ratio, the input speed and the duty, and we check the suitable version.
Can you bring Ondrives products to Romania, and how quickly?
Yes, we can supply Ondrives items to order. The lead time is usually 1–4 weeks, but a gear made to drawing, with grinding and heat treatment, may take longer. It is given in the quotation, after we receive the drawing or the tooth data.
Can I replace a worn gear if I no longer have the drawing?
Yes, based on the measured parts: the module, the number of teeth, the pressure angle and helix angle, the width, the bore, the keyway and the material. If you also have the mating wheel of the worn one, send it with the operating data; we identify which version in modules 0.2–12 is suitable.
What data do I send for a quotation on a planetary gearbox for a servo motor?
Send the output torque and speed, the desired ratio (on the EHD series between 3:1 and 36:1), the size of the servo motor flange and shaft, the radial and axial loads on the output shaft and the duty cycle. The servo motor plate or the code of the old gearbox speeds up identification.
How do I request a Ondrives quotation?
Send the Ondrives code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Ondrives Ltd (manufacturer documentation)

