Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Rechner Sensors supplier in Romania

For Rechner Sensors we quote KAS and KXS capacitive sensors, KFI, KFS, KFA and KFX capacitive level systems, IAS inductive sensors, MRS magnetoresistive sensors and Ex barriers; we need the full code and the zone type.

Request a quote

Who is Rechner Sensors and what does it make?

Rechner Sensors, from Germany, develops sensors for industrial applications, including small quantities and versions adapted to customer requirements. The range covers capacitive sensors, capacitive level measuring systems, inductive sensors, magnetoresistive sensors and isolating barriers for explosive atmospheres.

The KAS series capacitive sensors are flush or non-flush mounted and have 2-wire, NAMUR, NPN, PNP or relay outputs, in threaded housings M18 × 1, M30 × 1.5 or G 3/8" up to G 1" and in materials such as PTFE, PEEK or 1.4404 stainless steel. The KXS series has an extended sensing distance. For level there are KFI, KFS, KFA and KFX, with evaluation units, passive probes and probes with an integrated circuit, with probe length and active zone to choose and between one and four switching points.

IAS inductive sensors come in M8, M12, M18, M30 and M32 housings, while the MRS series uses the magnetoresistive principle. Approvals include Ex gas and dust, IECEx, overfill protection to WHG (the German water act) and materials compliant with 1935/2004. Ex barriers and power supplies complete the range. Some versions are approved for Ex zones from 0/1 up to 22/3, and the connection ranges from free cable to an M12 × 1 or M8 × 1 connector; housings are made of ABS, aluminium, PBT, PP, POM, PVC and other materials. For a quotation, send the full sensor code.

What do we supply from the Rechner Sensors range?

ProductDescription
KAS and KXS capacitive sensorsKAS covers threaded and cylindrical housings, flush or non-flush mounting, with 2-wire, NAMUR, NPN, PNP or relay outputs. KXS is the series with extended sensing distance for materials at a greater distance.
KFI, KFS, KFA, KFX capacitive level systemsOffered as evaluation units, passive probes or probes with an integrated circuit. Probe length, active zone, process connection and the number of switching points, from one to four, are set according to the tank.
IAS inductive sensorsThe IAS series includes sensors in M8, M12, M18, M30 and M32 housings, G thread and Triclamp, with 2-wire, NAMUR, NPN, PNP or relay outputs. Versions include flush or non-flush mounting.
MRS sensors and Ex barriersMRS magnetoresistive sensors use the magnetoresistive principle, while the Ex isolating barriers and power supplies connect the sensors in explosive atmospheres to the panel in the safe area.

Why Rechner Sensors?

  • 2-wire, NAMUR, NPN, PNP or relay outputs — the type is chosen to suit the control circuit
  • Level probes with probe length and active zone to choose — adapted to the actual tank
  • Ex gas and dust approvals, IECEx and WHG overfill protection — for explosive atmospheres
  • PTFE, PEEK and 1.4404 stainless steel materials — chosen according to the process medium
  • Versions with 1–4 switching points — several level thresholds on the same probe

Which Rechner Sensors codes and series are requested most often?

CodeDescription
KASCapacitive sensors, flush or non-flush mounting
KXSCapacitive sensors with extended sensing distance
KFICapacitive level measuring system
KFSSeries from the family of capacitive level systems
KFASeries from the family of capacitive level systems
KFXSeries from the family of capacitive level systems
IASInductive sensors, M8–M32 housings and G thread
MRSMagnetoresistive sensors

Where is Rechner Sensors equipment used?

  • Tank installations — capacitive level systems with 1–4 switching points
  • Explosive atmospheres — sensors with Ex gas and dust approvals, IECEx
  • Food — materials compliant with Regulation (EC) 1935/2004 and Triclamp connection
  • Water protection — WHG versions for overfill protection and leakage control
  • Machinery — inductive sensors in threaded metal housings

How do we supply Rechner Sensors in Romania?

We can quote KAS and KXS capacitive sensors, KFI, KFS, KFA and KFX level systems, IAS inductive sensors, the MRS series and Ex barriers. For an accurate quotation we need the full sensor code, because these codes contain the housing type, the output and the probe length. If it is missing, send the thread, the sensing distance, the output type, the voltage, the medium and the Ex zone. We supply to order, usually in 1–4 weeks; some special versions take longer, and the exact lead time is stated in the quotation.

Rechner codes describe very diverse configurations, so the quotation is confirmed once we see the full code or the mounting parameters.

Frequently asked questions about Rechner Sensors

What distinguishes the KAS, KXS, IAS and MRS series at Rechner Sensors?

KAS and KXS are capacitive sensors: KAS with flush or non-flush mounting, KXS with extended sensing distance. IAS is the inductive sensor series, with M8–M32 housings and G thread, and MRS is the magnetoresistive sensor series.

How do I choose between a KAS sensor and a KFI level system?

KAS is a capacitive sensor with a switching distance Sn, while KFI and the other KF series measure level through a probe, with up to four switching points. Send the vessel type, the liquid or material and the useful height.

Do you supply Rechner sensors in Romania, and how quickly?

Rechner sensors are supplied to order, usually in 1–4 weeks, and items can ship in 24–72 h when the item is in stock, locally or at the supplier. Versions with a special probe length may take longer. The final lead time is stated in the quotation.

Can I replace an older Rechner sensor?

Yes, after checking the full code: housing, thread, output type, voltage and sensing distance. With these values we select the equivalent version. Send the label or a photo of the sensor, and we propose the compatible version in the quotation.

What data should I send for a level sensor?

The type of material (liquid or granules), the tank height, the required probe length, the process connection, the output needed (for example NAMUR or relay), the supply voltage and the Ex zone, if any. With these data we select the KFI, KFS, KFA or KFX series.

How do I request a Rechner Sensors quotation?

Send the Rechner Sensors code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Rechner Sensors (manufacturer documentation)