Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

SABIA supplier in Romania

For SABIA we quote X1-LiNX PGNAA analysers for conveyor belts and X1-XP for pipes, Z1-LiNX retrofit kits and RHEA 2.0 and Soros 2.0 software, based on the material, the elements of interest and the belt or pipe configuration.

Founded in 2000

Request a quote

Who is SABIA and what does it make?

SABIA is an American manufacturer of online elemental analysers for bulk materials, active since 2000. The instruments use neutron activation analysis with prompt gamma-ray capture, called PGNAA (Prompt Gamma Neutron Activation Analysis), which gives the elemental composition of the material in motion, without sampling. The range includes analysers for conveyor belts, analysers for process slurries in pipes, retrofit kits for older PGNAA analysers and process control software packages.

The X1-LiNX is the analyser for conveyor belts: it mounts directly on the belt structure, with no additional structural work, has protected electronics that need no temperature-controlled cabinet, has no moving parts and needs only AC power and Ethernet. The X1-XP is the clamp-on analyser for pipes with diameters of 6–24 inches (152–610 mm), suited to slurries with about 30 % solids. The Z1-LiNX kits upgrade older analysers, such as CBX, CBGN, CBA, ECA, 1812, 3612 and ASYS, keeping the existing installation and shielding. The RHEA 2.0 software optimises the raw material blend and the mill, and Soros 2.0 manages stockpile building to a target composition.

Such analysers work in cement plants, at coal mines and coal-fired power plants, in phosphate or metal ore processing and in metal recycling. The offer starts from the material measured, the elements of interest, the belt or pipe configuration and, for retrofits, the model of the existing analyser.

What do we supply from the SABIA range?

ProductDescription
X1-LiNX — PGNAA analyser for conveyor beltsA compact analyser that gives real-time elemental analysis of the material on the belt, for building stockpiles and controlling the raw material blend in the cement industry, for power-plant coal, for phosphate or metal ores and for metal recycling.
X1-XP — PGNAA analyser for slurries in pipesA clamp-on analyser, mounted on the process pipe, for continuous, non-destructive elemental analysis of the slurry, with no sampling system. Optimum performance needs a constant mass flow and about 30 % solids in the slurry.
Z1-LiNX — retrofit kitsModular packages of detectors, electronics, server and software that replace the obsolete or unsupported components of the CBX, CBGN, CBA, ECA, 1812, 3612 and ASYS analysers, using the existing installation and shielding.
RHEA 2.0, Soros 2.0 and SAGERHEA 2.0 manages and optimises the raw material blend and the mill, Soros 2.0 manages stockpile building to a target composition, from manual to automatic control of the stackers, and SAGE adds machine learning for quality and process.

Why SABIA?

  • Online elemental analysis, with no samples — PGNAA measures the material on the belt or in the pipe continuously
  • Direct mounting on the belt structure — the X1-LiNX needs no additional structural work and no temperature-controlled cabinet
  • No moving parts — the analysers need only AC power and an Ethernet connection
  • Clamp-on analyser for 6–24 inch pipes — the X1-XP mounts on a section of high-density polyethylene pipe or similar
  • Upgrade of obsolete analysers — the Z1-LiNX kits replace detectors, electronics and software, with the same shielding

Which SABIA codes and series are requested most often?

CodeDescription
X1-LiNXPGNAA analyser for conveyor belts
X1-XPPGNAA analyser for slurries, 6–24 inch pipes
Z1-LiNXRetrofit kits for older PGNAA analysers
CBXPGNAA analyser model covered by the retrofit kits
CBGNPGNAA analyser model covered by the retrofit kits
CBAPGNAA analyser model covered by the retrofit kits
ECAPGNAA analyser model covered by the retrofit kits
1812PGNAA analyser model covered by the retrofit kits
3612PGNAA analyser model covered by the retrofit kits
ASYSPGNAA analyser model covered by the retrofit kits
RHEA 2.0Software for the raw material blend and the mill
Soros 2.0Stockpile composition control software

Where is SABIA equipment used?

  • Cement — raw material blend control and stockpile building
  • Coal and power — coal quality before combustion
  • Mining — processing of phosphate, gold, iron and nickel ores
  • Metal recycling — composition of the material stream
  • Process slurry installations — elemental analysis in the pipe

How do we supply SABIA in Romania?

Our offer for SABIA covers the X1-LiNX and X1-XP analysers, the Z1-LiNX retrofit kits and the RHEA and Soros software packages, supplied to order. Such a project is usually ordered in 1–4 weeks, but depending on the specification it can take much longer, especially if the system includes a neutron source. For the calculation we need to know the material and the elements to be analysed, the belt configuration (width, speed, layer height) or the pipe configuration (diameter, solids), the power supply available and, for retrofits, the model and series of the existing analyser.

The neutron source of the analyser is a regulated radioactive material, and the conditions for its delivery, import and use are established separately, on the basis of the customer's documents.

Frequently asked questions about SABIA

What does SABIA make?

SABIA makes online PGNAA elemental analysers for bulk materials: the X1-LiNX belt analyser, the X1-XP analyser for slurries in pipes and Z1-LiNX retrofit kits. It also offers process control software, for the raw material blend, stockpiles and mill optimisation.

How do I choose between the X1-LiNX and the X1-XP?

The X1-LiNX mounts on a conveyor belt and analyses the solid material in motion, while the X1-XP clamps onto a pipe for slurries with about 30 % solids, at diameters of 6–24 inches. Tell us the material, the form in which it flows and the elements to be tracked, so that we can guide the choice.

Can you bring SABIA analysers to Romania, and how fast?

The analysers are supplied to order, usually in 1–4 weeks, and depending on the specification the lead time can be longer; for systems with a neutron source, the lead time also depends on the transport and use documents. The exact value appears in the quotation.

Can I upgrade an older PGNAA analyser with a Z1-LiNX kit?

The Z1-LiNX kits are made for models such as CBX, CBGN, CBA, ECA, 1812, 3612 and ASYS and keep the existing installation and shielding. Compatibility with another model is confirmed after checking; send the model, series and age of the analyser, and we establish which components are replaced.

What data do I send for a quotation on a PGNAA analyser?

Send the material (for example limestone, coal, ore), the elements to be analysed and their ranges, the belt width and speed or the pipe diameter, the mass flow, the power supply available and the requirements for integration with the control system. For software, specify the process concerned.

How do I request a SABIA quotation?

Send the SABIA code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Sabia Inc (manufacturer documentation)