Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Sensirion supplier in Romania

For Sensirion we quote SFM3003 flow sensors, SFC5300, SFC5500 and SFC6000D mass flow controllers, SLF3S liquid sensors and SDP810 differential pressure sensors; we need the gas, the range and the interface required.

Founded in 1998 · Headquarters: Stäfa, Switzerland

Request a quote

Who is Sensirion and what does it make?

Sensirion is a Swiss sensor manufacturer based in Stäfa, active since 1998, whose CMOSens technology brings the measuring element, signal processing and digital calibration together on a single CMOS chip. From the range we quote the gas and liquid flow sensors, the differential pressure sensors and the mass flow controllers; the company's other sensor families are outside our offer. The principle is thermal: a MEMS sensor (micro-electro-mechanical system) measures the effect of the fluid flow on heat, with no moving parts, and the result is a digital signal that is already linearised and temperature-compensated.

For gases, the SFM3 family measures bidirectionally, calibrated and compensated, with no later drift compensation, for example the SFM3003-300, a digital sensor with low pressure drop for flows up to 300 slm (standard litres per minute). The mass flow controllers range from the SFC5300, for OEM projects (integration into other manufacturers' equipment), with ranges of 50–500 sccm (standard cm³ per minute) and 1–10 slm, to the highly configurable SFC5400 and the SFC5500, which covers several ranges in a single device, with multi-gas calibration, up to the SFC6000D, in 5, 20 and 50 slm versions. For liquids there are the SLF3S series, for example the SLF3S-1300F, up to 40 ml/min, and the LD20. The SDP3x and SDP800 differential pressure sensors offer I2C digital or analogue output, with measurement up to 2 kHz, and the gas meter modules measure mixtures such as hydrogen and biomethane.

Applications are process gas dosing, analytical instruments, burner control, ventilation with filter monitoring and gas metering. A quotation starts from the sensor code or, for a new project, from the gas, the flow range, the interface and the working pressure.

What do we supply from the Sensirion range?

ProductDescription
SFM3 Gas Flow Sensors (SFM3003-300)Bidirectional digital sensors, calibrated and temperature-compensated, with no need for drift compensation. The SFM3003-300 measures up to 300 slm with low pressure drop and is also available with a protective cap (CL version). The SFM3 family also covers other flow ranges.
Mass Flow Controllers (SFC5300, SFC5400, SFC5500, SFC6000D)The SFC5300 is for OEM projects, with ranges of 50–500 sccm and 1–10 slm and calibration for air, O₂, N₂, Ar, CO₂, He, H₂, CH₄ and other gases; the SFC5330 is the small version. The SFC5400 is configurable, the SFC5500 covers several ranges in one device, and the SFC6000D comes in 5, 20 and 50 slm versions.
Liquid Flow Sensors (SLF3S-0600F, SLF3S-1300F, LD20)Sensors with a straight flow channel, no moving parts and inert materials in contact with the liquid, for low flows. The SLF3S-1300F reaches 40 ml/min. The company's liquid sensors cover from hundreds of millilitres per minute down to nanolitres per minute, with bidirectional detection.
SDP3x and SDP800 Differential Pressure (SDP810-125Pa, SDP811-500Pa)Digital sensors or sensors with ratiometric analogue output for low differential pressures, with a measurement speed adjustable up to 2 kHz and smart averaging. They are used in VAV controllers (variable air volume), burners, heat recovery units and filter monitoring.

Why Sensirion?

  • A single measurement and calibration chip — the sensors come calibrated and temperature-compensated, so they need no later drift compensation
  • Mass flow controllers in a range from 50 sccm to 200 slm — the SFC5500 covers several ranges in a single device, with multi-gas calibration
  • Gas and liquid flow with the same principle — the SFM, SLF and LD20 families use the same thermal MEMS sensor, with no moving parts
  • Low differential pressure — the SDP3x and SDP800 work with an I2C interface or analogue output, for filters, burners and heat recovery units
  • Gas meter modules — measurement of gas mixtures, including hydrogen and biomethane, with digital electronics

Which Sensirion codes and series are requested most often?

CodeDescription
SFM3003-300-CLDigital gas flow sensor, 300 slm
SFM3003-300-CEDigital gas flow sensor, 300 slm, another version of the SFM3003 family
SFC5460Mass flow controller for OEM projects with large series
SFC5300Mass flow controller for OEM
SFC5330Small mass flow controller for OEM
SFC5400Configurable mass flow controller
SFC5500-10slmMass flow controller, 10 slm, multi-gas calibration
SFC5500-200slmMass flow controller, 200 slm
SFC6000D-5slmMass flow controller, 5 slm
SFC6000D-50slmMass flow controller, 50 slm
SLF3S-0600FLiquid flow sensor
SLF3S-1300FLiquid flow sensor, up to 40 ml/min
LD20-2600BLiquid flow sensor from the LD20 series
SDP810-125PaDigital differential pressure sensor, ±125 Pa
SDP811-500PaDigital differential pressure sensor, ±500 Pa
SDP31Digital differential pressure sensor

Where is Sensirion equipment used?

  • Process gas dosing — mass flow controllers for instruments and pilot plants
  • Analytical instruments — low gas and liquid flow in chromatographs and analysers
  • Burners and ventilation — differential pressure for filters, VAV and heat recovery units
  • Gas metering — modules for natural gas, biomethane and hydrogen meters
  • Semiconductors — gas flow for purging and liquid flow for dosing certain solutions

How do we supply Sensirion in Romania?

We can quote Sensirion sensors and controllers from the SFM, SFC, SLF, LD20 and SDP families, starting from the code on the device. We supply them to order, usually in 1–4 weeks; depending on the specification, the lead time may be longer for large series or versions with calibration for a special gas. For a correct quotation, send us the gas or liquid measured, the flow or differential pressure range, the working pressure, the interface (I2C, RS485, analogue), the connections and the quantity. For an OEM product, also add the ambient operating temperature.

Calibration for an unusual gas or mixture is based on the composition and the flow range.

Frequently asked questions about Sensirion

What does Sensirion make in the flow and pressure area?

Sensirion makes flow sensors for gases and liquids, mass flow controllers, differential pressure sensors and gas meter modules, all with thermal MEMS technology. The company has worked since 1998 and is based in Stäfa, Switzerland; our offer covers only these lines.

How do I choose between a flow sensor and a mass flow controller?

The sensor measures the flow, while the controller also regulates it with a proportional valve. For dosing a gas or mixture, choose an SFC controller; for simple monitoring, an SFM sensor. Send us the gas, the range in slm or sccm, the pressure and the interface required.

Can you supply Sensirion products in Romania, and how quickly?

Sensirion codes are supplied to order, usually in 1–4 weeks. A code can ship in 24–72 h when the item is in stock, locally or at the supplier. Large series and special calibrations may take longer, depending on the specification; we give the exact lead time in the quotation.

Can an older Sensirion sensor be replaced with a newer series?

This is checked against the full code, the range, the interface and the connector. Interchangeability is confirmed from the full code, not by family; send the code on the device and the wiring diagram, and we show which I2C address or mounting changes apply to the current series.

What details should I send for a mass flow controller quotation?

Send the gas or mixture, the minimum and maximum flow in slm or sccm, the inlet and outlet pressures, the interface (digital or analogue), the connections and the quantity. For applications with hydrogen or reactive gases, also add the safety conditions of the installation site.

How do I request a Sensirion quotation?

Send the Sensirion code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Sensirion AG (manufacturer documentation)