Scully Signal Company supplier in Romania
Scully Signal Company makes safety systems for the loading and transport of petroleum fuels
Founded in 1935 · Headquarters: Wilmington, Massachusetts, USA
Who is Scully Signal Company and what does it make?
Scully Signal Company is an American manufacturer based in Wilmington, Massachusetts, specialising in overfill prevention and grounding verification systems for the transfer of fuels and liquid chemicals. The company was founded in 1935 and now has over nine decades of activity in this narrow but safety-critical segment of oil terminals. From the Scully range we can quote rack controllers, optical tank sensors and static testing equipment for road and rail loading points. The Scully range covers the whole loading operation: the Intellitrol®2 rack controller communicates with the sensors in the tank compartments, verifies grounding and can identify the vehicle automatically through the T.I.M. module. The controllers cover multi-point installations (ST-35), single-point installations (ST-15) or on-board tanker units (IntelliCheck®3), with approvals for North America and ATEX versions for Europe, according to the manufacturer's documentation. The ST-47 Groundhog series verifies grounding before the pump starts. At terminals and tanker fleets, Scully fits where the internal regulation requires the pump to be physically blocked until grounding is confirmed, not just a visual alarm. Typical projects involve equipping loading racks and fitting road tankers with the compatible sensors.
What do we supply from the Scully Signal Company range?
| Product | Description |
|---|---|
| Intellitrol®2 Rack Controller | An auto-detecting controller for oil and chemical loading racks, able to monitor up to 8 sensors with 2 wires or 12 sensors with 5 wires. Available in 120V and 240V versions, with approvals for North America and for Europe, as stated in the manufacturer's technical documentation. It combines overfill prevention, grounding verification and, optionally, vehicle identification through the T.I.M. module. |
| ST-35 Multi-Point and ST-15 Single-Point Controllers | Overfill prevention controllers for installations with several loading points (ST-35) or a single point (ST-15), while the ST-15-WX is a point level control system for storage tanks, with overfill prevention and liquid detection. They work with the Scul-Sense optical sensors mounted in the tank compartments and stop the pump automatically at the set maximum level. |
| Scul-Sense and BioSense® Optical Sensors | Level sensors mounted in the tank compartments, available in two-wire (simple circuit) or five-wire (self-testing) versions, plus the BioSense® version with product retention for detecting emptied compartments. Stainless steel versions also exist for aggressive chemical environments or high pressure. Each sensor sends the level status to the rack or on-board controller, cutting off the flow before the product exceeds the safe volume of the compartment. |
| ST-47 Groundhog™ Static Verification Equipment | A controller dedicated to verifying grounding before the loading pump starts, used together with clamps and proving cables at racks where static electricity build-up is an ignition risk. It physically blocks the pump until the correct grounding resistance is confirmed, relevant for terminals handling flammable or powdery products. |
Why Scully Signal Company?
- A range dedicated to loading safety: tank sensors, rack controllers and grounding verification
- Controllers with versions for both North America and European installations, according to the manufacturer's documentation
- Automatic vehicle identification through the T.I.M. module, useful where delivery traceability is required
- Integrated grounding verification before the pump starts, not just signalling afterwards
- A range of 2-wire and 5-wire optical sensors compatible with most wiring standards of existing terminals
Which Scully Signal Company codes and series are requested most often?
| Code | Description |
|---|---|
| Intellitrol 2 | auto-detecting rack controller, up to 12 sensors |
| IntelliCheck 3 | on-board controller for tankers, overfill prevention |
| ST-35 | multi-point controller for loading racks |
| ST-15 | single-point overfill prevention controller |
| ST-15-WX | point level control for storage tanks, with overfill prevention and liquid detection |
| ST-47 Groundhog | grounding verification controller |
| Scul-Sense Five-Wire | five-wire optical sensor for tankers |
| Scul-Sense Two-Wire | two-wire optical sensor for tankers |
| BioSense | optical sensor with retention, empty compartment detection |
| Scully Connect Plus | tool-free sensor, quick mounting |
| T.I.M. Truck Identification Module | automatic vehicle identification module |
| Scully Mobile Truck Tester | portable test unit for road tankers |
| Universal Truck Tester | universal tester for tanker diagnostics |
| Scully Vapor Connect Kit | vapour recovery connection verification kit |
| Scul-Sense Stainless Steel Sensor | stainless steel chemical sensor, high pressure |
| Thermistor Liquid Level Sensor | level sensor with thermistor |
| Ground Bolt / Ground Ball | grounding components for the rack |
| Universal Loading Rack Tester | complete tester for loading racks |
| Whistler Fill Signal | audible full-fill signal |
| Sculmatic Air Throttle Actuator | pneumatic flow reduction actuator |
Where is Scully Signal Company equipment used?
- Oil and gas — controllers and sensors for petroleum product loading racks
- Rail transport — identification and monitoring systems for rail tankers
- Chemicals — stainless steel sensors for corrosive environments when loading chemical tankers
- Aviation — grounding verification equipment for aircraft refuelling
- Fuel and heating oil distribution — mobile testing of road tankers
How do we supply Scully Signal Company in Romania?
We can quote Scully Signal Company controllers and sensors from the manufacturer's technical documentation. We supply the equipment to order, usually in 1–4 weeks, depending on the exact configuration and on the manufacturer's confirmation. For a quotation we need the type of installation (fixed rack or mobile tanker), the number of compartments or loading points, the available supply voltage and whether the installation requires ATEX certification. This range is supplied to order, since each rack configuration differs in the number of sensors and the type of controller.
For Romania, supply is to order.
Frequently asked questions about Scully Signal Company
What does a Scully Signal Company controller do at the loading rack?
The controller monitors the level sensors in the tank compartments and stops the pump automatically before the product exceeds the safe volume, while also verifying the grounding of the vehicle. Models such as Intellitrol 2 can handle up to 12 sensors at the same time, and versions exist for explosion-risk areas, according to the manufacturer's documentation, for European installations.
What is the difference between Scully two-wire and five-wire sensors?
The two-wire sensor uses a simple optical detection circuit, suited to older installations, while the five-wire sensor adds a self-test circuit that confirms the sensor works correctly before each loading. The choice depends on the wiring already installed on the tanker and on the requirements of the controller used.
Can Scully Signal Company be sourced in Romania or Europe?
Yes, to order: we supply the equipment, usually in 1–4 weeks, depending on the configuration.
What information do you need for a Scully equipment quotation?
We need the type of installation (fixed rack or road/rail tanker), the number of compartments or loading points, the voltage available at the rack and whether ATEX certification is required for the explosive area. With this data we can identify the correct controller and sensor version from the Scully range.
What certifications do Scully controllers have for explosion-risk areas?
Models intended for the North American market have versions for hazardous environments, and those for the European market have versions for explosion-risk areas, according to the manufacturer's technical documentation for Intellitrol 2.
How do I request a Scully Signal Company quotation?
Send the Scully Signal Company code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Scully Signal Company (manufacturer documentation)

