SDT Ultrasound supplier in Romania
Ultrasound detectors and systems for maintenance
Founded in 1975 · Headquarters: Brussels, Belgium
Who is SDT Ultrasound and what does it make?
SDT Ultrasound is a Belgian manufacturer of ultrasound detectors and systems for predictive maintenance. The company's story begins in 1975, when the development of ultrasound instruments started against the background of the oil crisis. The headquarters is in Brussels. The principle is simple: many faults, from a dry bearing to a compressed air leak or an electrical discharge, produce an ultrasonic noise long before they are audible or visible.
The range starts from the SDT340 and SDT270 data collectors, which combine ultrasound with vibration and integrate with the Ultranalysis Suite 3 (UAS3) software, then goes down to dedicated instruments from the CHECKER series: LEAKChecker for compressed air and vacuum leaks, TRAPChecker for steam traps, LUBEChecker for bearing greasing and TIGHTChecker for the tightness of closed volumes. For condition-based greasing there is the LUBExpert, and for permanent monitoring there are the Vigilant, Online4US and the CONMONSense sensors. The SDT340 can also be used, in the TankTest version, to check the tightness of tanks.
The benefit is direct: lower energy consumption by eliminating compressed air losses, detection of faulty steam traps and a move from calendar-based greasing to the actual condition of the bearing. The choice between the models in the range depends on the main applications, on the sensors needed (contact or airborne) and on the need for data analysis in software.
What do we supply from the SDT Ultrasound range?
| Product | Description |
|---|---|
| SDT340 and SDT270 | Ultrasound data collectors (and vibration, on the SDT340) for bearings, leaks, electrical faults and steam traps. The SDT340 can work in the LUBExpert mode and can record condition data at up to 256 ksps during greasing. |
| CHECKER instruments | A family of dedicated detectors: LEAKChecker for compressed air and vacuum leaks in noisy environments, TRAPChecker for steam traps and valves, LUBEChecker for condition-based greasing, TIGHTChecker for tightness, HATCHecker for hatch covers. |
| LUBExpert | An ultrasound solution for correct bearing greasing. It warns when friction increases, guides re-greasing and prevents both over-greasing and under-greasing. There is also the LUBExpert ON-GUARD version. |
| Vigilant, Online4US and CONMONSense | Permanent monitoring systems: the Vigilant collects from eight ultrasound or vibration sensors plus four channels for temperature, speed and pressure, the Online4US works with 4–32 channels, and the CONMONSense is an ultrasonic sensor with an analogue output. |
Why SDT Ultrasound?
- Ultrasound and vibration in the same instrument — the SDT340 collects both types of data and sends them to UAS3 for trending and analysis
- Condition-based greasing — the LUBExpert and the LUBExpert module of the SDT340 guide the operator and prevent over- or under-greasing
- CHECKER instruments for a single task — LEAKChecker, TRAPChecker, LUBEChecker or TIGHTChecker, each with a colour screen
- Modular permanent monitoring — the Online4US is configured with 4 to 32 channels, and the Vigilant accepts up to eight sensors
- Software in seven languages — UAS3 manages from a few hundred to a few thousand assets
Which SDT Ultrasound codes and series are requested most often?
| Code | Description |
|---|---|
| SDT340 | Ultrasound and vibration data collector, with LUBExpert mode |
| SDT340 TankTest | Version for tank tightness testing |
| SDT270 | Ultrasound detector for bearings, leaks and electrical faults |
| SDT200 | Ultrasound detector for leaks, bearings and electrical panels |
| LEAKChecker | Detector for compressed air and vacuum leaks in noisy environments |
| LUBEChecker | Instrument for bearing greasing, connected to the grease gun |
| TRAPChecker | Instrument for checking steam traps and valves |
| TIGHTChecker | Instrument for checking the tightness of closed volumes, with T-SONIC1 emitter |
| LUBExpert ON-GUARD | Condition-based greasing version from the LUBExpert range |
| Vigilant | Collection module for eight ultrasound or vibration sensors |
| Online4US | Multichannel online system, 4–32 channels, ultrasound and vibration |
| CONMONSense | Permanently mounted ultrasonic sensors with analogue output |
| UAS3 | Ultranalysis Suite 3, software for ultrasound and vibration data |
Where is SDT Ultrasound equipment used?
- Industrial utilities — compressed air and steam losses
- Mechanical maintenance — bearings, condition-based greasing, gearboxes
- Electrical maintenance — partial discharges and arcs in switchboards
- Naval — checking the tightness of hatch covers
- Tanks and closed volumes — tightness tests with ultrasound
How do we supply SDT Ultrasound in Romania?
We can quote SDT detectors and systems, starting from the main application (leaks, steam traps, bearings, greasing, tightness) and from the sensors needed. We supply the equipment to order, usually in 1–4 weeks; for permanent multi-channel systems the lead time may be longer and is confirmed in the quotation. Send us the types of machinery to be inspected, the approximate number of measurement points, whether contact or airborne sensors are needed, whether you also want vibration and what data management system you already use. For accessories or replacement sensors, also add the code from the part.
The calibration and service conditions of a particular instrument are established for that model, on the basis of the manufacturer's documentation.
Frequently asked questions about SDT Ultrasound
What products does SDT Ultrasound make?
SDT Ultrasound makes ultrasound detectors and systems for predictive maintenance: collectors such as the SDT340 and SDT270, the CHECKER instruments for leaks, steam traps, greasing and tightness, permanent systems (Vigilant, Online4US) and UAS3 analysis software. The company was founded in 1975 and is headquartered in Brussels.
How do I choose between the SDT340, the SDT270 and a CHECKER instrument?
The SDT340 combines ultrasound with vibration and can work in the LUBExpert greasing mode; the SDT270 covers ultrasound inspection with several applications. A CHECKER instrument is simpler and is chosen for a single task, for example air leaks. Send us the list of main applications.
Do you supply SDT equipment in Romania and how fast?
Yes, to order. Portable instruments are supplied to order, usually in 1–4 weeks, while permanent multi-channel systems often take longer. We confirm the lead time in the quotation, once we have established the configuration and the sensors.
What sensors are needed for bearing inspection?
For bearings, contact sensors are used, such as the RS Needle in three lengths or the RS Threaded for permanent mounting, connected to an SDT340 or SDT270. Airborne sensors are for leaks. Send us the type of machinery and the access to the measurement points.
What information do you need for a quotation on a permanent monitoring system?
The number of monitored points, the type of sensors (ultrasound, vibration, temperature, speed), the communication protocol wanted, the mounting environment and whether the data goes into an existing system. For the Online4US specify how many channels you need, between 4 and 32.
How do I request a SDT Ultrasound quotation?
Send the SDT Ultrasound code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: SDT International (manufacturer documentation)

