Sefelec (Eaton) supplier in Romania
automated electrical testers, insulation, dielectric strength (hipot), cable testers, milliohmmeters
Founded in 1965 · Headquarters: Lognes, France
Who is Sefelec (Eaton) and what does it make?
Sefelec is a French manufacturer of instruments for electrical safety and insulation testing, headquartered in Lognes, near Paris, active since 1965. The range covers dielectric strength testers (dielectric withstand tests), megohmmeters for insulation resistance, low-voltage safety testers, earth continuity testers and automatic scanners for the serial testing of electrical products. From the Sefelec range we can quote both the bench instruments for the quality laboratory and the automatic scanners for the production line.
What sets Sefelec apart is its focus on high-volume automated testing: the 64-SC series of external scanners allows switching between several test points, useful where every product leaving the line must be checked individually before shipment. The SYNOR 5000 family covers automatic cable testing, detecting continuity or short-circuit faults directly in production. The series 56 dielectric testers (56-D, 56-H, 56-S) form a family of bench instruments for dielectric strength, hipot and low-voltage safety.
For the Romanian market, Sefelec makes sense for manufacturers of electrical and electronic components, repair workshops for railway or aeronautical equipment and quality laboratories that must document dielectric strength tests on every batch produced.
What do we supply from the Sefelec (Eaton) range?
| Product | Description |
|---|---|
| Series 56 / 506 Dielectric Testers and Hipot Testers | Bench instruments for dielectric strength testing (56-D, 506-D), safety hipot tests (56-H, 506-H) and low-voltage safety verification (56-S, 506-S), from the same family of bench instruments. The RMG series (RMG 15 AC, RMG 12 AC DC, RMG 12 DC) covers additional AC and DC hipot versions. Typical application: quality control at the end of production for transformers, motors or electrical apparatus, where every unit must pass a documented dielectric strength test. |
| 64-SC Series External Scanners | Automatic switching systems between several test points, used together with a dielectric tester or hipot tester to test products with multiple electrical configurations without manual rewiring between readings. They integrate into automated production lines, where they reduce the test time per unit and eliminate manual connection errors. The customer must specify the number of channels needed and the type of test instrument the scanner will be coupled to. |
| SYNOR 5000 Automatic Cable Testers | SYNOR 5000-C and SYNOR 5000-P test continuity, short circuits and insulation on batches of cables or wiring harnesses directly from production, with programmable test sequences for each connector configuration. Useful for harness manufacturers in automotive, aerospace or industrial equipment, where every harness must be checked before shipment. The customer specifies the number of wires and the type of connectors in order to receive a suitable test configuration. |
Why Sefelec (Eaton)?
- 64-SC external scanner for the serial testing of electrical products
- Family of bench instruments for dielectric strength, hipot and low-voltage safety
- SYNOR 5000 automatic cable testers, with fault detection directly on the production line
- Instruments for electrical safety and insulation, including milliohmmeters for aerospace applications (RCP2A)
Which Sefelec (Eaton) codes and series are requested most often?
| Code | Description |
|---|---|
| 56-D | Bench dielectric tester for dielectric strength |
| 506-D | Dielectric tester: dielectric strength 5 kVAC / 6 kVDC and insulation resistance |
| 56-H | Electrical safety hipot tester |
| 506-H | Hipot tester from the 506 series |
| 56-S | Low-voltage safety tester |
| 506-S | Low-voltage safety tester from the 506 series |
| RMG 15 AC | AC hipot tester |
| RMG 12 AC DC | AC and DC hipot tester |
| RMG 12 DC | DC hipot tester |
| 1000-M | Megohmmeter for insulation resistance |
| 1500-M | Megohmmeter for insulation resistance |
| 32-C | Earth bonding continuity tester |
| MGR10 | Milliohmmeter for low resistance measurements |
| RCP2A | Portable digital milliohmmeter (1 µΩ–6 Ω), for measuring metallisation in aerospace |
| 64-SC | External scanner for automatic switching between test points |
| SYNOR 5000-C | Automatic continuity tester for cables |
| SYNOR 5000-P | Automatic cable tester: continuity, insulation and dielectric strength |
| CA 01 | Safety enclosure for operator protection during electrical testing |
| CA 02 | Safety enclosure for electrical testing |
| CA 03 | Safety enclosure for electrical testing |
Where is Sefelec (Eaton) equipment used?
- Aerospace — insulation testing of on-board wiring and electrical components
- Rail — electrical safety verification of traction equipment
- Defence — dielectric strength tests on military equipment
- Automotive — automatic testing of wiring harnesses in production
- Manufacturers of electrical components — quality control at the end of the line
How do we supply Sefelec (Eaton) in Romania?
For Sefelec we rely on the data sheets in the manufacturer's technical documentation; availability and lead time are checked on every request. We source Sefelec instruments to order, usually within 1–4 weeks depending on the configuration requested. For a quotation, the customer needs to send the exact model (for example 56-H or SYNOR 5000-C), the number of channels or test points needed and the type of product tested. This range is supplied to order; each instrument is configured to the customer's requirement.
Sefelec instruments in this range are calibrated in accredited laboratories; we supply the instruments.
Frequently asked questions about Sefelec (Eaton)
What product range does Sefelec have?
Sefelec makes instruments for electrical safety and insulation testing: dielectric testers, hipot testers, megohmmeters, earth continuity testers and automatic scanners for serial testing. The company is headquartered in Lognes, France, and has been active since 1965.
How do I choose a Sefelec dielectric tester for quality control?
For standard dielectric strength tests choose the series 56 (56-D, 56-H). If you test several points on the same product, add a 64-SC scanner for automatic switching between channels.
What is the Sefelec SYNOR series used for in cable testing?
SYNOR 5000-C covers continuity and short-circuit testing on batches of cables, while SYNOR 5000-P measures continuity (1 mΩ–2 kΩ), insulation (50 kΩ–5 GΩ) and dielectric strength. Both are programmed for each type of harness tested.
How long does delivery take in Romania for Sefelec instruments?
We source Sefelec instruments to order, usually within 1–4 weeks, depending on the configuration requested. The instruments are supplied to order.
How do I request a Sefelec (Eaton) quotation?
Send the Sefelec (Eaton) code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Sefelec (manufacturer documentation)

