Sonel supplier in Romania
Power analysers, electrical appliance testers, cable detectors, industrial thermal imaging cameras
Headquarters: Świdnica, Poland
Who is Sonel and what does it make?
Sonel is a Polish manufacturer based in Świdnica, specialising in portable measuring instruments for electricians, maintenance laboratories and photovoltaic installers. The range includes industrial multimeters, power quality analysers, testers for verifying electrical installations, underground cable detectors and industrial thermal imaging cameras. For users in Romania (a qualified electrician, a PRAM electrical testing laboratory or a maintenance technician), Sonel offers a range of instruments for the periodic tests on low-voltage installations.
What sets Sonel apart is the wide coverage of a single family of multifunction instruments: the MPI series measures the parameters of the electrical installation (insulation resistance, continuity, RCD trip time, loop impedance) from a single field instrument, while the KT thermal imaging series reaches resolutions of 640×480 pixels with thermal sensitivity below 50 mK. The industrial multimeters of the CMM series are rated CAT IV 600 V and have IP67 protection, suited to measurements in harsh environments.
For installers and PRAM laboratories in Romania, Sonel makes sense where a single instrument has to cover several successive tests (verifying a new installation, an EV charging station or a photovoltaic installation) without the need for several separate devices in the field.
What do we supply from the Sonel range?
| Product | Description |
|---|---|
| MPI Series Multifunction Installation Testers | Field instruments for verifying low-voltage electrical installations: insulation resistance, continuity, RCD trip time and loop impedance, in a single device carried by the electrician at every acceptance or periodic inspection. |
| CMM Series Industrial Multimeters | Digital multimeters with reinforced housing, CAT IV 600 V safety rating and IP67 protection, with extended functions (temperature, capacitance, frequency) for measurements on site or in industrial halls, where office multimeters do not hold up. |
| KT Series Thermal Imaging Cameras | Industrial thermal cameras with a sensor of up to 640×480 pixels and thermal sensitivity (NETD) in the order of tens of milliKelvin, for inspecting electrical panels, connections and rotating equipment in operation. |
| EVSE-100: Analyser for EV Charging Stations | A device dedicated to testing electric vehicle charging stations, which checks the electrical parameters specific to these installations, a relatively new category in electricians' periodic test portfolio. |
Why Sonel?
- Multifunction installation tester (MPI series): insulation, continuity, RCD and loop impedance from a single field instrument
- IP67, CAT IV 600 V industrial multimeters: dust- and water-resistant, for harsh working environments
- Thermal imaging cameras up to 640×480 px: fine thermal inspection of panels and equipment
- Analyser dedicated to EV charging stations: EVSE-100 testing covers a growing segment of electrical installations
- Varied range: installation testers, multimeters, thermal imaging and cable detectors
Which Sonel codes and series are requested most often?
| Code | Description |
|---|---|
| MPI-540 | Multifunction electrical installation tester: insulation, RCD, loop |
| MPI-540-PV | MPI-540 version for testing photovoltaic installations |
| CMM-40 | Industrial multimeter CAT IV 600 V, IP67 |
| CMM-60 | Industrial multimeter |
| KT-510 | Industrial thermal imaging camera |
| KT-525 | Thermal imaging camera, mid-range |
| KT-650 | Thermal imaging camera 640×480 px, NETD 40 mK; the manufacturer's documentation marks it as a discontinued model, availability is confirmed |
| MIC-15K1 | Insulation quality analyser |
| EVSE-100 | Multifunction analyser for EV charging stations |
| PQM-750 | Power quality analyser |
| LKZ-2500-PRO | Underground cable and infrastructure detector |
| PAT-95 | Portable tester for electrical appliances |
| PAT-96 | Portable tester for electrical appliances, extended version |
| PVM-1530 | Analyser for photovoltaic installations |
Where is Sonel equipment used?
- Electrical installations: periodic inspections and acceptance tests according to regulations
- Photovoltaics: testing PV installations with dedicated instruments
- Electric mobility: checking EV charging stations
- Industrial maintenance: thermal inspection of panels and equipment
- PRAM laboratories: insulation, continuity and RCD tests
How do we supply Sonel in Romania?
We supply Sonel instruments for electrical installation testing and thermal imaging strictly on the basis of the information in the manufacturer's technical documentation; exact availability is confirmed in the quotation. We bring in the equipment to order, usually in 1–4 weeks, depending on the model and on confirmation from the Polish factory. For an accurate quotation, a PRAM laboratory or an electrician should tell us which tests they want to cover with the instrument (insulation, RCD, loop, thermal imaging) and whether they need specific accessories, such as probes or clamps. We check availability for each model in the range, since configurations vary from one customer to another.
Availability of an accessory variant or of the reporting software is checked for each request, before the quotation.
Frequently asked questions about Sonel
What products does Sonel make?
Sonel makes portable measuring instruments for electricians and maintenance laboratories: multifunction electrical installation testers, industrial multimeters, thermal imaging cameras and power quality or photovoltaic analysers. All are designed for field use, not for a stationary laboratory.
How do I choose a Sonel tester according to the tests I carry out?
Start from the tests required at the acceptance of the installation: if you only need insulation and continuity, a basic model covers the requirement, but if you also check loop impedance or RCD time, choose a version from the MPI series with full functions. Tell us the exact application for the right recommendation.
Do you supply Sonel products in Romania, and how long does it take?
Yes, to order, usually in 1–4 weeks, depending on the model and on confirmation from the Polish manufacturer. The range is supplied to order, according to the configuration requested by the customer.
What is the Sonel MPI series?
The MPI series comprises multifunction testers for electrical installations.
What should I send for a Sonel thermal camera quotation?
Specify the sensor resolution you want, the temperature range to be measured and whether the application is for electrical panels, rotating equipment or building inspections, so that we can identify the right model in the KT series before sending the quotation.
How do I request a Sonel quotation?
Send the Sonel code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Sonel S.A. (manufacturer documentation)

