VibraSens supplier in Romania
For VibraSens we quote IEPE piezoelectric accelerometers in the 101, 103 and 111 series, 4–20 mA transmitters of the 125 series, MEMS sensors 405 and 451, cables and signal conditioners; the item is identified by series, sensitivity and connector.
Who is VibraSens and what does it make?
VibraSens is a European manufacturer of vibration transducers for industrial machine monitoring. The range includes industrial piezoelectric accelerometers, IEPE sensors, MEMS sensors, vibration transmitters, signal conditioners, low-noise twisted-pair cables and a vibration calibration service.
The 101 series is the annular shear piezoelectric accelerometer, with sensitivity variants of 10, 50, 100 and 500 mV/g, a temperature range from −55 °C to 150 °C and two-wire IEPE supply, with a constant current of 4 mA. The housing is double-insulated and Faraday-shielded, and the IP68 version with cable can work submerged down to 150 m. The 101.11 series is the high-temperature version, 103.02 has a side output, and 111.01 is a velocity sensor for temperatures up to 120 °C.
For continuous monitoring without a dedicated system, the 125 series is a 4–20 mA loop transmitter, which connects directly to a PLC, DCS or 4–20 mA monitors and can give velocity or acceleration, effective or peak value. The MEMS sensor 405.I58 is designed for machines below 4,000 rpm, and 451 is a laboratory MEMS accelerometer. For a quotation, the output type, sensitivity, connector, working temperature and cable length matter.
What do we supply from the VibraSens range?
| Product | Description |
|---|---|
| Series 101 – IEPE piezoelectric accelerometers | Sealed industrial accelerometer, with sensitivities of 10, 50, 100 and 500 mV/g, M12 or MIL connector, temperature from −55 °C to 150 °C and an optional temperature output. It is used on bearings, pumps, motors and fans. |
| Series 101.11, 103.02 and 111.01 | 101.11 is the sealed accelerometer for high temperatures, 103.02 is the variant with side output, and 111.01 is a piezoelectric velocity sensor, usable up to 120 °C. They are chosen according to the mounting location and the process temperature. |
| Series 125 – 4–20 mA transmitter | Vibration transmitter in a current loop, with velocity or acceleration output, effective or peak value, plus an optional dynamic output. It connects to a PLC or DCS for continuous tracking of the overall vibration of the machine. |
| MEMS sensors 405.I58 and 451 | 405.I58 is an IEPE MEMS sensor for online monitoring of machines below 4,000 rpm, and 451 is an IEPE MEMS accelerometer for laboratory use. Both use two-wire IEPE transmission. |
Why VibraSens?
- Annular shear on the 101 series — a construction less sensitive to cable movement and transverse vibration
- Double housing insulation and Faraday shield — limits ground loops and electromagnetic interference
- IP68 variants with M12 connector — fitted in locations exposed to water, including submerged down to 150 m
- 125 series with 4–20 mA loop — connects directly to a PLC or DCS, without a dedicated acquisition board
- MEMS sensors for slow machines — continuous monitoring at speeds below 4,000 rpm
Which VibraSens codes and series are requested most often?
| Code | Description |
|---|---|
| 101.51 | IEPE annular shear piezoelectric accelerometer, M12 or MIL connector |
| 101.11 | Sealed piezoelectric accelerometer for high temperatures |
| 103.02 | Piezoelectric accelerometer with side output |
| 111.01 | Piezoelectric velocity sensor, usable up to 120 °C |
| 125.01 | 4–20 mA vibration transmitter, velocity or acceleration |
| 160.01-I | Piezoelectric sensor in TO5 housing |
| 194 | Captive screw for mounting sensors with side output |
| 206 | Stainless steel adhesive pad for permanent mounting of sensors with side output |
| 405.I58 | IEPE MEMS sensor for online monitoring below 4,000 rpm |
| 451 | IEPE MEMS accelerometer for laboratory use |
Where is VibraSens equipment used?
- Predictive maintenance — continuous monitoring of bearings and gears
- Pumps and electric motors — overall vibration on the casing or on the bearing housing
- Fans and cooling towers — slow machines, with low frequencies
- Agitators and mixers — measurement at low frequencies down to 0.2 Hz
- Installations with wet environments — sealed IP68 sensors with cable or M12 connector
How do we supply VibraSens in Romania?
We can quote VibraSens vibration sensors, cables, signal conditioners and mounting accessories, for new systems or to replace existing sensors. Send the series or the code from the sensor, the sensitivity (mV/g), the connector type, the cable length, the process temperature and the acquisition system it connects to. We supply the sensors to order, usually in 1–4 weeks; items can ship in 24–72 h when the item is in stock, locally or at the supplier. We confirm the exact lead time in the quotation, and depending on the variant it may be longer.
Compatibility with the existing acquisition system is determined in the quotation, once we receive the sensitivity, the IEPE supply current and the connector type from the current sensor.
Frequently asked questions about VibraSens
What types of sensors are the 101, 125 and 405.I58 series at VibraSens?
The 101 series includes IEPE piezoelectric accelerometers, the 125 series is a 4–20 mA transmitter, and 405.I58 and 451 are MEMS sensors. The range also includes signal conditioners and cables, and the company also offers a vibration calibration service. The transducers are intended for monitoring rotating machines.
How do I choose the sensitivity of a 101 series accelerometer?
The 101 series exists with 10, 50, 100 and 500 mV/g. The 100 mV/g variant is general purpose, and the 500 mV/g one goes down to 0.2 Hz, suited to slow machines. Send the machine speed, the frequencies of interest and the measuring system.
Do you supply VibraSens sensors in Romania, and how quickly?
Sensors are ordered specifically for your request, and the usual lead time is 1–4 weeks. The sensor you want can ship in 24–72 h when the item is in stock, locally or at the supplier. Special variants may have a longer lead time, confirmed in the quotation.
Can I replace an existing vibration sensor with a VibraSens one?
It is possible, if the parameters match. We need the sensitivity (mV/g), the IEPE current required by the system, the connector type, the frequency range and the working temperature. Based on these data we check equivalence before the quotation.
What do you need from me for a 101.11, 103.02 or 111.01 accelerometer?
101.11 is the sealed accelerometer for high temperatures, 103.02 is the variant with side output, and 111.01 is a piezoelectric velocity sensor, usable up to 120 °C. For a quotation send the application (bearing, pump, fan), the series or the code of the current sensor, the sensitivity, the output required (IEPE or 4–20 mA), the connector, the cable length, the temperature and, if applicable, the IP68 sealing or submersion requirement.
How do I request a VibraSens quotation?
Send the VibraSens code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: VibraSens (manufacturer documentation)

