Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

UE Systems supplier in Romania

For UE Systems we quote Ultraprobe 100, 2000, 3000, 9000, 10,000 and 15,000 detectors and Ultraprobe 201 and 401 lubrication instruments, based on the application, the need for data storage and the working area.

Headquarters: Elmsford (New York), USA

Request a quote

Who is UE Systems and what does it make?

UE Systems, based in Elmsford, in New York state, makes instruments that detect the ultrasound emitted by equipment in operation. Sounds from 20 kHz upwards cannot be heard, but friction, shock and turbulence in a bearing, a compressed air leak or an electrical discharge produce them, and the UE Systems instruments capture the 20–100 kHz range and convert it into audible sound and a value in decibels. The range is called Ultraprobe and is completed with remote monitoring sensors and with software for managing inspection routes.

The models are divided by usage level. Ultraprobe 15,000 and 10,000 are for condition monitoring, with frequency adjustment and sound recording; the 15,000 adds a touch screen. Ultraprobe 9000 and 3000 are digital troubleshooting instruments, and 2000 and 100 are analogue instruments. Ultraprobe 401, with a digital version, and 201, with an analogue version, are dedicated to condition-based lubrication: they listen to bearing friction and show how much lubricant needs to be added, instead of lubricating on a calendar. Ultraprobe 3000 complies with ASTM E1002 for leak detection and stores 400 measuring points.

The applications are leaks of compressed air, steam, vacuum and gases, the condition of bearings, steam traps and valves that do not seal, as well as partial discharges, the corona effect and electric arcs in low, medium and high voltage switchgear. In predictive maintenance, the value of such an instrument lies in comparison with a reference value: a deviation of the level in decibels signals the need to intervene before the fault stops the line.

What do we supply from the UE Systems range?

ProductDescription
Ultraprobe 15,000 and 10,000Equipment condition monitoring instruments, with frequency adjustment, data synchronisation and sound recording; the 15,000 has a touch screen and an integrated spectrum analyser. They are used on bearings, electrical installations, steam traps and leaks, with inspection routes planned in the software.
Ultraprobe 3000 and 9000Digital troubleshooting instruments. Ultraprobe 3000 detects compressed air leaks and faulty steam traps, with data exportable over USB, and the 9000 is the advanced-level digital model, with route transfer to the software and an ATEX version according to the manufacturer's documentation for classified areas.
Ultraprobe 100 and 2000Analogue instruments. Ultraprobe 100 has an 8-position sensitivity dial and an LED indicator in dB, and the 2000 is the advanced analogue model, with adjustable frequency. They suit leak and bearing inspections made without data storage, with a simple instrument that is easy to carry.
Ultraprobe 401 and 201Instruments for condition-based lubrication, with a magnetic transducer, a noise headset, a lamp and a screen with the level in dB. The digital version 401 also keeps a record of grease quantities and routes, and the 201 is the analogue version.

Why UE Systems?

  • Ultrasound detection in the 20–100 kHz range — the same instrument listens to leaks, bearings, valves and electrical discharges
  • Condition-based lubrication — Ultraprobe 401 and 201 show the level in dB before and after lubrication, so that the bearing receives the lubricant it needs
  • Levels from analogue to digital — Ultraprobe 100 and 2000, 3000 and 9000, then 10,000 and 15,000, depending on how much has to be stored and analysed
  • Leaks to ASTM E1002 — Ultraprobe 3000 meets the requirements for leak detection and stores 400 measuring points
  • Remote monitoring — the family extends from the hand-held instrument to the OnTrak Wireless sensors, which follow bearings and lubrication without on-site inspection

Which UE Systems codes and series are requested most often?

CodeDescription
Ultraprobe 15,000Advanced condition monitoring instrument, touch screen
Ultraprobe 10,000Standard condition monitoring instrument, with sound recording
Ultraprobe 9000Advanced digital troubleshooting instrument
Ultraprobe 3000Digital leak instrument, ASTM E1002, 400 points
Ultraprobe 2000Advanced analogue instrument
Ultraprobe 100Analogue leak instrument, with indicator and LED
Ultraprobe 401Digital instrument for condition-based lubrication
Ultraprobe 201Analogue instrument for condition-based lubrication
OnTrak WirelessWireless bearing monitoring system
UltraTrak 850sSmart analogue sensor
UE InsightsAnalysis and reporting software

Where is UE Systems equipment used?

  • Energy and utilities — partial discharges in medium-voltage boards and cells, steam leaks
  • Manufacturing — compressed air leaks, bearings of motors and fans
  • Oil, gas and chemicals — steam traps, valves and vacuum installations
  • Food and beverages — compressed air networks and lines with a large number of bearings
  • Predictive maintenance — periodic inspection routes with reference values at each point

How do we supply UE Systems in Romania?

We can quote Ultraprobe ultrasound detectors, monitoring sensors and UE Systems accessories, supplied to order. The lead time is usually 1–4 weeks to order, and depending on the specification it can be longer for ATEX versions. For a correct quotation, tell us the application (leaks, bearings, electrical discharges or lubrication), whether you need data storage and route software, the working area (with or without explosion hazard) and the accessories you want, such as probes, headset or magnetic transducer. For an existing instrument, send the model and serial number.

The model is established from the application and the working area, and the availability of ATEX versions is confirmed on the configuration requested.

Frequently asked questions about UE Systems

What does UE Systems make?

UE Systems makes ultrasound instruments for maintenance: the Ultraprobe instruments for leaks, bearings, steam traps and electrical discharges, condition-based lubrication instruments and remote monitoring sensors. The company is based in Elmsford, in New York state.

How do I choose between an analogue and a digital Ultraprobe?

Analogue instruments, such as Ultraprobe 100 and 2000, respond with an indicator and sound and suit spot inspections. The digital ones, from the 3000 upwards, store measuring points, plot trends and transfer routes to the software. Send us the application and the number of points inspected and we recommend the suitable level.

Can you supply UE Systems equipment in Romania and how fast?

Yes. Instruments are supplied to order, usually in 1–4 weeks. ATEX versions may take longer, depending on the specification. A quotation with a precise lead time follows once we establish the model and the accessories.

Can I replace an old Ultraprobe with a current model?

It can be checked based on the old model, the accessories used (probes, headset, transducer) and the way of working, with or without route software. Compatibility is confirmed after we compare these data; send the model and serial number from the instrument.

What do I send for a quotation on an Ultraprobe 401 lubrication instrument?

Tell us how many bearings you lubricate per route, what type of grease you use, whether you work in an area with dust or high noise and whether you want a record of lubricant quantities in the software. If you have a 201 or 401 instrument, add the serial number, so that we can check the accessories.

How do I request a UE Systems quotation?

Send the UE Systems code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: UE Systems (manufacturer documentation)