Toellner supplier in Romania
For Toellner we quote power supplies of the TOE 8730, 8850, 8870 and 8950 series, TOE 8805–88165 arbitrary power sources, the TOE 7761 arbitrary generator and wideband or four-quadrant amplifiers; we need the series, the voltage and the current.
Founded in 1972 · Headquarters: Herdecke, Germany
Who is Toellner and what does it make?
Toellner Electronic Instrumente of Herdecke has made electronic measuring and test instruments since 1972: laboratory, high-power and arbitrary power supplies, function generators, and wideband and four-quadrant amplifiers. The instruments are found in development and test laboratories in the automotive and aeronautical industries, in research and in automation.
Among the laboratory supplies, TOE 8730 groups models with two to five outputs, with very low residual noise, while TOE 8850 integrates into systems through GPIB, RS 232 and an analogue input, at 320 W and up to 130 V. The TOE 8870 high-power supplies reach 1500 W, 400 V and 100 A, with active power factor correction and an arbitrary mode. The TOE 8805–88165 arbitrary power sources cover from 160 to 5200 W, with a slew rate of about 2 V/µs and internal power absorption of up to 16,000 W.
The TOE 7761 arbitrary generator works between 1 µHz and 40 MHz, with 1,000,000 sample points, 80 MS/s and 14-bit resolution. The amplifiers are either wideband or four-quadrant, with power sourced and absorbed; the model is chosen according to the power, voltage and frequency band required.
An order specifies the complete series, the output voltage and current, the interface and the options wanted.
What do we supply from the Toellner range?
| Product | Description |
|---|---|
| TOE 8730 and 8850 laboratory supplies | Supplies with one to five outputs, up to 320 W, with low residual noise. TOE 8730 has two to five outputs and a residual ripple of 50 µV, while TOE 8850 is adjusted with an incremental dial, has GPIB, RS 232 and analogue interfaces and reaches 130 V. |
| TOE 8870, 8871, 8872, 8950 high-power supplies | Supplies with automatic range adjustment and active power factor correction: TOE 8871 has 1000 W, TOE 8872 has 1500 W, with voltages up to 400 V and currents up to 100 A. TOE 8950 has 400 W and a USB interface. They have an arbitrary mode. |
| TOE 8805–88165 arbitrary power sources | Fast arbitrary sources, from 160 to 5200 W, for voltage and current characteristics defined by the user. The slew rate is about 2 V/µs, and the short load currents reach 1000 A. Internal power absorption reaches 16,000 W, with AC superimposition up to 70 kHz. |
| TOE 7761 arbitrary generator and amplifiers | The TOE 7761 arbitrary generator covers 1 µHz – 40 MHz, with 1,000,000 sample points and 80 MS/s. The amplifiers are wideband or four-quadrant, with power sourced and absorbed, for test benches. |
Why Toellner?
- Laboratory supplies and arbitrary sources up to 5200 W — a single family covers the laboratory bench and high-power tests
- Arbitrary mode on TOE 8870 and 8950 — voltage and current follow waveforms defined by the user
- TOE 8805–88165 arbitrary sources with internal power absorption of up to 16,000 W — they allow AC components of up to 70 kHz to be superimposed
- TOE 7761 arbitrary generator, from 1 µHz to 40 MHz — arbitrary waveforms with 14-bit resolution
- Four-quadrant amplifiers — they source and absorb power, for simulating the supply on the test bench
Which Toellner codes and series are requested most often?
| Code | Description |
|---|---|
| TOE 8730 | Supplies with 2–5 outputs, up to 150 W total, 48 V |
| TOE 8850 | Supply with 1–2 outputs, up to 320 W, 130 V, 20 A |
| TOE 8871 | High-power supply, 1000 W |
| TOE 8872 | High-power supply, 1500 W |
| TOE 8950 | Supply with 1–2 outputs, 400 W, with USB and arbitrary mode |
| TOE 8805–88165 | Fast arbitrary sources, from 160 to 5200 W |
| TOE 7761 | Arbitrary generator, 1 µHz – 40 MHz, 14-bit |
| Four-quadrant amplifiers | Source and absorb power, for simulating the supply on the bench |
Where is Toellner equipment used?
- Automotive development and testing — arbitrary sources and amplifiers for simulating the supply
- Aeronautical industry — power supplies and generators for test benches
- Research and university laboratories — laboratory supplies and function generators
- Automation and automated test benches — supplies with GPIB, RS 232 and USB
- General electronics — development and verification of modules
How do we supply Toellner in Romania?
We can quote Toellner laboratory and high-power supplies, arbitrary sources, function generators and amplifiers, according to the requirements of your test bench. For a correct quotation we need the series wanted, the maximum output voltage and current, the number of outputs, the interface (GPIB, RS 232, USB or analogue) and the options required, for example the arbitrary mode or the short load current. Items are supplied to order, usually in 1–4 weeks; for special options the lead time may be longer, and the exact date appears in the quotation.
The exact series and options are determined from the voltage, current and interface required by your test bench, before the quotation is confirmed.
Frequently asked questions about Toellner
What are TOE 8730, TOE 8850, TOE 8950 and the TOE 7761 generator from Toellner?
TOE 8730 has 2–5 outputs, up to 150 W total, at 48 V; TOE 8850 has 1–2 outputs, up to 320 W, 130 V and 20 A; TOE 8950 has 1–2 outputs, 400 W, with USB and an arbitrary mode. TOE 7761 is an arbitrary generator, from 1 µHz to 40 MHz, with 14 bits.
How do I choose between TOE 8871 and TOE 8872?
Both are high-power supplies with automatic range adjustment and active power factor correction: TOE 8871 offers 1000 W, while TOE 8872 offers 1500 W. The voltage can reach 400 V and the current 100 A, depending on the model. Send the working voltage and current, and we check the model.
Do you supply Toellner instruments in Romania, and how quickly?
Toellner instruments are supplied to order. The usual lead time is 1–4 weeks, and an instrument can ship in 24–72 h when the item is in stock, locally or at the supplier. For models with special options the lead time may be longer, and the exact date appears in the quotation.
Can I replace an existing Toellner supply with a model from the current series?
Yes, if the voltage, current, power, control interface and case dimensions match. We establish the equivalence after checking: send the complete series from the nameplate, and we compare the data with the TOE 8730, 8850, 8870 or 8950 series, as applicable.
What details do I send for a TOE 8850 supply or a four-quadrant amplifier?
Send the TOE series or code, for example TOE 8850, the output voltage and current, the number of outputs, the interface wanted and the options, for example the arbitrary mode. For a four-quadrant amplifier, also state the absorbed power and the frequency band needed.
How do I request a Toellner quotation?
Send the Toellner code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: TOELLNER Electronic Instrumente GmbH (manufacturer documentation)

