Seepex supplier in Romania
Progressing cavity pumps for sludge
Founded in 1972 · Headquarters: Bottrop, Germany
Who is Seepex and what does it make?
SEEPEX is a German manufacturer focused solely on progressing cavity pumps, based in Bottrop and active since 1972. This type of pump solves a specific problem that classic centrifugal pumps do not handle well: the controlled, constant-flow transfer of viscous liquids, liquids with solids content or shear-sensitive liquids: sludges from wastewater treatment plants, semi-solid food products, adhesives or industrial pastes. The company has stayed focused solely on this design principle, developing a very wide range of configurations for almost any combination of viscosity, solids content and hygiene requirements.
The BN range covers standard block pumps, with rotor and stator mounted directly on a compact frame, for general industrial and wastewater treatment applications. The BT series is the open hopper pump, intended for very viscous materials. Certain series can be fitted with the company's Smart Conveying Technology (SCT), which allows a worn stator to be adjusted or replaced directly on the pipeline, without fully dismantling the pump or disconnecting the suction and discharge pipes.
Rotor and stator materials vary from stainless steel for the rotor with elastomers such as NBR, EPDM or FKM for the stator, chosen according to chemical compatibility and the temperature of the fluid handled, to fully metal versions for abrasive fluids or high temperatures where elastomers would not withstand. Flow rates cover from a few litres per hour, for precision dosing, up to a few hundred cubic metres per hour for sludge transfer in large treatment plants. SEEPEX pumps are found in wastewater treatment plants, the food, pharmaceutical and cosmetics industries, the paper industry and chemical processes where constant flow, regardless of the system pressure, is essential for process quality.
What do we supply from the Seepex range?
| Product | Description |
|---|---|
| BN Series Block Pumps | The BN series is the standard SEEPEX progressing cavity pump, with rotor and stator mounted directly on a compact block frame, with no additional intermediate components between the motor and the pumping elements. It is the default solution for transferring sludge in wastewater treatment plants, industrial pastes and viscous liquids with moderate solids content, at flow rates from a few litres per hour up to a few tens of cubic metres per hour. Rotor and stator materials are chosen according to the fluid handled: stainless steel with NBR or EPDM elastomers for general applications, or FKM for extended chemical compatibility. The compact construction reduces the installation space required and simplifies integration into existing installations. |
| BT Series Open Hopper Pumps | The BT series is the open hopper pump for very viscous materials. |
| Smart Conveying Technology (SCT) | SCT is the SEEPEX solution for fast maintenance of progressing cavity pumps: a system that allows adjustment of the clearance between rotor and stator, or complete replacement of the worn stator, without disconnecting the suction and discharge pipes and without removing the pump from its mounted position. Replacement of the rotor and stator is sped up by as much as 85%, an important advantage for treatment plants or production lines that cannot afford long shutdowns. It is available on certain SEEPEX series and is an important argument for operators who evaluate the total cost of ownership of a progressing cavity pump, not just the purchase price. |
| Hygienic Pumps for the Food and Pharmaceutical Industry | For applications with strict hygiene requirements, SEEPEX makes variants of progressing cavity pumps certified for food and pharmaceutical contact, with polished internal surfaces, clamp connections compatible with CIP/SIP practices and elastomer materials approved for contact with food products. They are used to transfer shear-sensitive products, such as yoghurts with fruit pieces, food pastes or viscous cosmetic products, where a centrifugal pump would damage the product structure. The constant flow, regardless of the system back pressure, ensures precise dosing in packaging and filling processes where the consistency of the final product matters. |
Why Seepex?
- Smart Conveying Technology (SCT): stator adjustment and replacement directly on the pipeline, without fully dismantling the pump
- Constant flow regardless of pressure: precise control for dosing and transfer of viscous fluids or fluids with solids
- Very wide range of materials: from standard elastomers to fully metal versions for abrasive or hot fluids
- Focus solely on progressing cavity pumps: over five decades of refining the same design principle
- Low stress on the fluid handled: transfer without strong shearing, suitable for structure-sensitive food products
- Wide flow coverage: from dosing of a few litres per hour up to hundreds of cubic metres per hour for sludge
Which Seepex codes and series are requested most often?
| Code | Description |
|---|---|
| Seria N | Basic progressing cavity pump, standard platform for most industrial applications |
| BN | Block-design pump, compact mounting for restricted spaces |
| BNM | Block pump with access to the rotor and the drive joint (Rotor and Drive Joint Access) |
| SJA | BN variant with direct access to the coupling joint (Smart Joint Access), for inspection and service |
| NS | Bare-shaft pump, for coupling to existing drives |
| BNA | API 676 pump, for regulated industrial applications |
| SCT | Pump with quick rotor and stator change, without removing the pipes |
| Seria E | Semi-submersible pump, for partial installation in a tank or basin |
| Seria W | Wobble-type pump, with compact and economical construction |
| Seria T | Open hopper pump |
| BT | Open hopper variant with an adapted feed configuration |
| CS | Pump for food and hygienic applications, with specific certifications |
| Seria D | Dosing pump for small, precise flow rates |
| BF | Pump adapted to battery production applications |
Where is Seepex equipment used?
- Wastewater treatment: transfer of primary, secondary and mechanically dewatered sludge
- Food and beverage industry: transfer of viscous products or products with solid pieces, with progressing cavity pumps
- Pharmaceutical and cosmetics industry: dosing and transfer of pastes and gels
- Chemical industry: transfer of adhesives, paints and industrial pastes
- Paper and pulp industry: transfer of paper pulp and process sludge
- Agriculture and biogas: transfer of animal manure and substrate for biogas plants
How do we supply Seepex in Romania?
We arrange the supply of SEEPEX progressing cavity pumps, the BN block series, the BT open hopper series and the hygienic variants for the food industry, for treatment plants and chemical processes in Romania, through EU supply channels. We check the options for each rotor and stator material in the manufacturer's technical documentation and confirm availability on each request. For correct selection, send us the fluid handled, the required flow rate and the discharge pressure required by the installation. Wear parts for usual models (stators, rotors, seals) generally arrive in 24–72 h when the item is in stock, locally or at the supplier, while complete pumps or special configurations generally take 1–4 weeks to order.
Retrofitting Smart Conveying Technology on very old pumps is analysed on the basis of the existing model, and availability of parts is checked for each request.
Frequently asked questions about Seepex
What is the difference between SEEPEX BN series and BT series pumps?
The BN series is a block-design pump, compact and suited to installations with limited space, while the BT series uses an open hopper designed for viscous materials or materials with solids content that must be fed by gravity. In practice, the choice depends on how the product reaches the pump: through a pressurised pipe or by free fall.
What does SCT technology mean on SEEPEX pumps?
SCT is the SEEPEX solution that allows the rotor and stator to be replaced without disconnecting the suction or discharge pipes, which reduces maintenance downtime. It is especially useful where the pump runs continuously and every hour of shutdown costs production, not just the spare parts needed for the work.
Do you supply SEEPEX pumps in Romania?
Yes, SEEPEX progressing cavity pumps are supplied in Romania to order, through EU supply channels; lead times vary by model and configuration. For a useful quotation, send the required flow rate, the discharge pressure, the type of fluid handled and, if available, the complete code of the pump you are replacing.
What data is needed for a SEEPEX pump quotation?
It helps to send the complete pump code, from the manufacturing nameplate, or, if you cannot access it, the type of fluid handled, the flow rate and pressure wanted, plus the working temperature in the installation. This data allows quick identification of the right series among the BN, BT, CS or D variants.
How do I request a Seepex quotation?
Send the Seepex code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: SEEPEX GmbH, HNP Mikrosysteme GmbH (manufacturer documentation)

