Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

SlurryPro supplier in Romania

For SlurryPro we quote horizontal SS series pumps, vertical SV series pumps, rubber and high chrome wear parts, impellers and casings in polymer 377, plus the automatic greasing system; we need the process data.

Headquarters: Staveley, United Kingdom

Request a quote

Who is SlurryPro and what does it make?

SlurryPro is a British brand of centrifugal pumps for abrasive slurry, based in Staveley, near Chesterfield. The range is aimed at mining, quarries and recycling, that is plants where the fluid carries hard particles and wears the pump quickly. The core families are the horizontal SS series, the vertical SV series and the wear parts for both.

The horizontal SS series pumps are built on a cartridge-type bearing assembly, which is removed for work on site. The slide base opens with a hydraulic cylinder, so a single person can dismantle the pump. The motor mount takes all motor sizes, and the frame is prepared as standard for an automatic greasing system. The wear parts are chosen from high chrome or from different grades of rubber, depending on the abrasiveness and chemical aggressiveness of the slurry.

The vertical SV series has a cantilever shaft, without bearings and without seals in the hydraulic part. The column length and the impeller shape can be adapted to all sizes. It is used for washdowns and sump drainage in metallurgical, mining and coal plants. For a quotation, send the type of slurry, the solids concentration, the particle size, and the required flow and head.

What do we supply from the SlurryPro range?

ProductDescription
Horizontal SS seriesHorizontal centrifugal slurry pumps, in various sizes and with wear parts in high chrome or rubber. The bearing assembly is removed as a cartridge, the slide base opens with a hydraulic cylinder, and the universal motor mount takes all motor sizes.
Vertical SV seriesVertical cantilever pumps, without bearings and without seals in the hydraulic part. The versions are elastomer-lined or made of hard metal and are used for corrosive slurries with large particles and for high slag concentrations, in metallurgy, mines and coal.
Polymer 377 for horizontal pumpsHigh-density polymer material for impeller and casing, with the same dimensions as the rubber 360 and high chrome 331 versions. It is fitted without modifying the pump and is used for brines, fluids that crystallise and chemical sludges.
Spare parts and greasing systemRubber and high chrome parts for all SlurryPro pump sizes, plus the automatic greasing system, supplied separately or as a set. The set includes a magnetic bracket for up to five grease cartridges, with nozzles and tubes.

Why SlurryPro?

  • Impellers and casings in high chrome, rubber or polymer — the material is chosen by the type of wear and the chemical aggressiveness of the slurry
  • Removable cartridge-type bearing assembly on the SS series — eases maintenance on site
  • Slide base with hydraulic cylinder — opening the pump does not involve lifting heavy parts
  • Cantilever shaft on the SV series — the hydraulic part has no bearings or seals submerged in the slurry
  • Frames prepared as standard for automatic greasing — the fitted system lubricates the bearings and seals at regular intervals, during operation

Which SlurryPro codes and series are requested most often?

CodeDescription
SSHorizontal series of centrifugal slurry pumps
SVVertical series of pumps with cantilever shaft
DiamondSeries from the slurry pump range
CobaltSeries from the slurry pump range
331High chrome material for wear parts
360Rubber material for wear parts
377High-density polymer for impeller and casing
Automatic GreaserAutomatic greasing system for bearings and seals
FPT Drain PlugDrain plug from the accessories range

Where is SlurryPro equipment used?

  • Mining — transport of abrasive slurries from processing operations
  • Quarries — pumping sludge with hard particles and rapid wear
  • Recycling — fluids loaded with solids, in plants with varied requirements
  • Metallurgy — washdowns and drainage with high slag concentrations
  • Coal preparation — washing slurries in coal plants

How do we supply SlurryPro in Romania?

We can quote SlurryPro slurry pumps from the SS and SV series, impellers and casings in rubber, high chrome or polymer 377, and spare parts for existing pumps. For a correct quotation, send the series and size of the pump or a photo of the nameplate, the type of slurry, the concentration and size of the solids, the flow and the head. Pumps and parts are supplied to order, usually in 1–4 weeks; depending on the specification, the lead time can be longer, and the exact date appears in the quotation.

We confirm in the quotation the exact size and material of each part, based on the process data and the pump nameplate.

Frequently asked questions about SlurryPro

What pumps does SlurryPro make?

SlurryPro makes centrifugal pumps for abrasive slurry: the horizontal SS series and the vertical SV series, plus the Diamond and Cobalt series and wear parts in rubber and high chrome. The range is made for mining, quarries, recycling and coal preparation; the company is based in Staveley, in the United Kingdom.

How do I choose between a horizontal SS pump and a vertical SV one?

The SS series stands on a frame next to the basin and has cartridge bearings, while the SV series is lowered into the basin, with a cantilever shaft and no bearings in the wet section. For selection, send the flow, the head, the solids concentration and the depth of the basin, and we check the suitable series.

Do you supply SlurryPro in Romania, and how fast?

Yes, to order. Pumps and parts come to order, and the usual lead time is 1–4 weeks. Items can ship in 24–72 h when the item is in stock, locally or at the supplier. For your code, the lead time is confirmed in the quotation.

Can I replace the rubber impeller with a polymer 377 one?

Yes: polymer 377 has the same dimensions as the rubber 360 and high chrome 331 versions, so it fits the same pump, without modifications. The choice depends on the fluid: it is used for brines, fluids that crystallise and chemical sludges. Send the composition of the fluid and the working temperature.

What data should I send for wear parts in material 331, 360 or 377 for an SS or SV pump?

Send the series and size of the pump, the year or serial number from the nameplate, the part wanted (impeller, casing, liner, ring) and the current material. Add the type of slurry, the concentration and the particle size; this way we can check whether the rubber, high chrome or polymer version fits. Material 331 is high chrome, 360 is rubber, and 377 is a high-density polymer for impeller and casing.

How do I request a SlurryPro quotation?

Send the SlurryPro code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: SlurryPro (manufacturer documentation)