Tefen supplier in Romania
For Tefen we quote MixRite 2.5 and 3.5 dosing pumps (including PVDF and ByPass), TF5 CL, TF25 and E-300 PRO, based on the dosed additive, the dosing percentage, the water line flow rate and the model already installed.
Founded in 1970
Who is Tefen and what does it make?
Tefen is an Israeli manufacturer of dosing pumps and of products for fluid circuits, active since 1970. The main line is called MixRite and includes water-driven proportional dosing pumps: the pump starts by itself when water flows through it and stops when the flow ceases, and the additive is injected directly into the pipe, in proportion to the flow. The pumps are hydraulic, volumetric and work without an electrical supply. For installations that need electrical control there is the MixRite E-300 PRO pump, and the fluid circuits range includes fittings (also in PVDF), tubing, valves, nozzles and spray guns.
Dosing accuracy does not depend on pressure or flow variations in the water network, unlike Venturi injectors and electric ones, and the dosing percentage is read directly on the pump and adjusted without calibration. Materials are chosen by additive: the TF5 CL and TF25 series have Viton seals and Hastelloy springs for chlorine-based additives, MixRite 2.5 PO uses EPDM seals for organic acids, and MixRite 3.5 PVDF, with Aflas seals, is intended for concentrated acids, above 15 %. The 3.5 ByPass version is made for hard water with high pH, in combination with alkaline, foaming or chlorinated products.
Pumps of this type are found in car wash stations, in dosing detergents and disinfectants into water lines, on livestock farms (additives in drinking water), in fertigation systems and in water treatment installations. The choice depends on the line flow rate, the dosing percentage and the chemical compatibility of the additive, which is why the quotation starts from these data or from the code of the installed model.
What do we supply from the Tefen range?
| Product | Description |
|---|---|
| MixRite 3.5 (CW, PVDF, ByPass, PO) | Hydraulic pumps with adjustable dosing up to 10 % and flow rates up to 3500 l/h. The PVDF version with Aflas seals is for concentrated acids, ByPass for hard water with high pH, and CW for dosing products in car wash stations. |
| MixRite 2.5 (STD, PO, PVDF, ByPass, C) | Hydraulic pumps for flow rates of 10–2500 l/h, with fixed dosing of 0.8 % or adjustable between 0.1 and 0.4 % in the PO version. They can work from low flow rates, from 7 l/h, and the EPDM seals are suitable for organic acids. |
| MixRite TF5 CL and TF25 | Pumps for high water flow rates: TF5 CL works between 0.1 and 5 m³/h with dosing of 0.1–5 %, and TF25 between 0.2 and 25 m³/h with 0.1–5.5 %. Viton seals and Hastelloy springs allow chlorine-based additives. |
| MixRite E-300 PRO | Electric dosing pump, for precise injection of fertilisers and additives directly into water pipes. |
Why Tefen?
- Driven by the line water — the MixRite pump starts when water flows and stops when the flow stops, with no electrical power and no separate automation
- Flow-proportional dosing — the percentage stays constant despite flow and pressure variations, unlike Venturi injectors
- Materials chosen by additive — Viton and Hastelloy for chlorine-based products, EPDM for organic acids, PVDF with Aflas seals for acids above 15 %
- Wide flow range in the same family — from 7 l/h (the LFR system) up to 25 m³/h (MixRite TF25), with dosing percentages adjustable directly on the pump
- Version for hard water — MixRite 3.5 ByPass, usable with alkaline, foaming or chlorinated products
Which Tefen codes and series are requested most often?
| Code | Description |
|---|---|
| MixRite 2.5 STD | Hydraulic dosing pump, series 2.5, standard version |
| MixRite 2.5 PO | Version with EPDM seals, 10–2500 l/h, dosing 0.8 % fixed or 0.1–0.4 % |
| MixRite 2.5 C | Series 2.5 version for industrial applications |
| MixRite 3.5 PO | Hydraulic pump series 3.5 with seals for organic acids |
| MixRite 3.5 CW | Series 3.5 version for car wash stations |
| MixRite 3.5 PVDF | PVDF body and Aflas seals, acids above 15 %, 0.1–10 %, 10–3500 l/h |
| MixRite 3.5 ByPass | Version for hard water, 1–10 %, 50–3500 l/h |
| MixRite TF5 CL | Viton and Hastelloy, 0.1–5 %, 0.1–5 m³/h |
| MixRite TF25 | Viton and Hastelloy, 0.1–5.5 %, 0.2–25 m³/h |
| MixRite LF-1000 PO | Low flow rates, 4–1000 l/h, dosing 0.2–2 % |
| MixRite E-300 PRO | Electric dosing pump for fertilisers and additives |
Where is Tefen equipment used?
- Car washes — dosing detergents, disinfectants and waxes into the water line
- Food processing — in-line dosing of additives into process water
- Metalworking — dosing cutting oils into emulsions
- Water treatment — chlorination and disinfection with pumps that need no electrical supply
- Agriculture and livestock — fertigation and additives in drinking water
How do we supply Tefen in Romania?
We can quote Tefen dosing pumps from the MixRite 2.5, 3.5, TF5, TF25 and E-300 PRO families, supplied to order. Supply usually takes 1–4 weeks to order; special configurations can need longer, and an item can ship in 24–72 h when the item is in stock, locally or at the supplier. For a correct quotation, send us the full code of the installed model or the dosed additive, the desired percentage, the minimum and maximum flow rate of the water line, the pressure and temperature, and the sealing materials required for the chemical product concerned.
The compatibility of an additive with the pump seals is determined from the name and concentration of the chemical product, and the availability of a specific version is checked on each request.
Frequently asked questions about Tefen
What does Tefen make?
Tefen makes dosing pumps, mainly the MixRite line of proportional hydraulic pumps driven by the water in the pipe, plus the MixRite E-300 PRO electric pump and fluid circuit products: fittings, tubing, valves, nozzles and guns. The company has worked since 1970 and has a quality system with certifications as stated in the manufacturer's documentation.
How do I choose a MixRite pump for my water line?
Start from the minimum and maximum flow rate of the line, the dosing percentage and the chemical product dosed. The 2.5 series covers lower flow rates, the 3.5 series reaches 3500 l/h, and TF5 and TF25 reach 5 and 25 m³/h respectively. Send us these data and the working pressure, and we identify the series.
Can you supply Tefen pumps in Romania and within what lead time?
MixRite pumps are supplied to order, usually in 1–4 weeks. For configurations with special seals, depending on the specification, the lead time can be longer, and an item can ship in 24–72 h when the item is in stock, locally or at the supplier. The exact lead time is confirmed in the quotation.
My MixRite pump fails with acids or chlorine; which version fits?
The sealing materials decide the service life: Viton with a Hastelloy spring for chlorine-based products, EPDM for organic acids, PVDF with Aflas seals for concentrated acids. Tell us the product and the concentration, and we check the suitable version for your model.
What data do I send for a quotation on a Tefen dosing pump?
Send the code of the existing model or, for a new installation, the water line flow rate (minimum and maximum), the dosing percentage, the additive and its concentration, the working pressure and the connection type. With these we choose the series and the seal materials.
How do I request a Tefen quotation?
Send the Tefen code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Tefen Flow and Dosing Technologies (manufacturer documentation)

