Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

ViscoTec supplier in Romania

Continuous-piston dosing pumps and emptying systems for adhesives and pastes

Founded in 1997 · Headquarters: Töging am Inn, Germany

Request a quote

Who is ViscoTec and what does it make?

ViscoTec is a German manufacturer of dosing systems and rotary volumetric pumps, founded in 1997 and based at Töging am Inn. The company has about 300 employees in Germany, America, China, France, Singapore, India and Hong Kong and had sold more than 100,000 pumps by 2020. The working principle is called the continuous piston (Endloskolben): an eccentric rotor moves inside a stator and conveys the product with a constant volume per revolution, without pulsation.

Because the volume depends on the angle of rotation, dosing is done by time or by number of revolutions, with a stated accuracy of 1 %; reversing the direction cuts off the product strand and removes the need for a dosing valve in over 95 % of applications. The pump series include vipro-PUMP (0.14–5.2 ml/rev), vipro-PUMP MR, RD-EC, 4RD6-EC-MF with no metal in contact, VMP (4–65 ml/rev, 8125 ml/min) and, for two-component products, vipro-DUO, vipro-DUOMIX, ViscoDUO-P and ViscoDUO-VM HD.

The emptying systems for drums and cartridges (vipro-FEED, ViscoMT) feed the dosing units with adhesives and sealants of up to 7,000,000 mPas. The main industries are automotive, electronics, e-mobility, aerospace, consumer goods, renewable energy, pharma, cosmetics, dental technology and 3D printing. The product dosed, the dose per cycle and the number of components are the basis for choosing the right pump.

What do we supply from the ViscoTec range?

ProductDescription
vipro-PUMP and VMPSingle-component dosing pumps: vipro-PUMP delivers about 0.14–5.2 ml per revolution (17–650 ml/min), and VMP about 4–65 ml per revolution (40–8125 ml/min); hard-chrome or ceramic rotor for abrasive media.
RD-EC and 4RD6-EC-MFMicro dosing pumps for very small volumes (minimum dose 0.002 ml on RD-EC). The 4RD6-EC-MF version has no metal in the product contact area.
vipro-DUO, vipro-DUOMIX, ViscoDUOPumps for two-component systems, with mixing ratios from 1:1 to 100:1; ViscoDUO-VM HD reaches a maximum flow of 1428 ml/min and uses food-contact elastomers, according to the manufacturer's documentation.
vipro-FEED and ViscoMT emptying systemsUnits that empty drums, buckets and cartridges evenly: ViscoMT-XS (5–50 l), XL (from 50 l, up to 9.8 l/min), D (100 ml–5 l), plus vipro-FEED M plus and L plus. The hygienic versions go up to 1500 l tanks.

Why ViscoTec?

  • Continuous piston principle — pulsation-free dosing, with a stated accuracy of 1 % and high repeatability
  • No dosing valves in over 95 % of applications — reversing the direction cuts off the product strand
  • Chrome-plated or ceramic rotors — the ceramic version for highly abrasive media, on the vipro-PUMP and VMP series
  • Series for one or two components — from microdosing (0.002 ml minimum) to 8125 ml/min, with mixing ratios from 1:1 to 100:1
  • Emptying systems from cartridges to 1500 l drums — products from 30,000 to 7,000,000 mPas

Which ViscoTec codes and series are requested most often?

CodeDescription
vipro-PUMP1K dosing pump, 0.14–5.2 ml/rev
vipro-PUMP MR1K pump, 38–110 ml/min, viscosity below 20,000 mPas
RD-EC1K micro pump, minimum dose 0.002 ml
4RD6-EC-MF1K micro pump with no metal in contact with the product
VMP1K pump, 4–65 ml/rev, up to 8125 ml/min
vipro-DUO2K pump, 0–1300 ml/min, mixing 1:1 – 100:1
vipro-DUOMIX2K pump, up to 400 ml/min
ViscoDUO-PCompact 2K pump, mixing ratios from 1:1
ViscoDUO-VM HD2K pump, up to 1428 ml/min
ViscoMT-XSEmptying system for 5–50 l containers
ViscoMT-XLEmptying system for containers from 50 l
ViscoMT-DEmptying system for 100 ml–5 l
vipro-FEED M plusAutomatic feeding, up to approx. 30 l
vipro-FEED L plusAutomatic feeding, up to approx. 200 l
vipro-FEED DCFeeding from dual cartridges of 200 and 400 ml

Where is ViscoTec equipment used?

  • Automotive and e-mobility — application of adhesives and sealants
  • Electronics — sealing and bonding of housings
  • Aerospace — dosing of special products
  • Pharma, cosmetics and dental technology — hygienic versions
  • Food and 3D printing — filling and paste dosing

How do we supply ViscoTec in Romania?

We can quote ViscoTec dosing pumps, emptying systems and wear parts such as rotors and stators. Supply is to order, and the lead time may be longer depending on the specification, especially for systems configured on the customer's line. For a correct quotation we need the product dosed and its viscosity, the abrasiveness, the volume per dose and the flow, the number of components and the mixing ratio, the container (cartridge, bucket, drum) and the interface with the machine.

The rotor or stator material suitable for a specific product is chosen on the basis of data on its composition.

Frequently asked questions about ViscoTec

What products does ViscoTec make?

Volumetric dosing pumps based on the continuous piston principle, dosing systems for one or two components, emptying systems for drums and cartridges, filling pumps and 3D printing heads, for adhesives, sealants and paste.

How do I choose a ViscoTec pump by dosing volume?

The volume per revolution and the flow determine the series: RD-EC for doses of the order of 0.002 ml, vipro-PUMP for 0.14–5.2 ml per revolution, VMP for 4–65 ml. Viscosity, abrasiveness and whether the product has one or two components also matter.

Can you supply ViscoTec products in Romania, and within what lead time?

Yes, ViscoTec equipment is supplied to order from Germany. For configured systems the lead time may be longer, depending on the specification, and is confirmed in the quotation.

Can I replace an existing ViscoTec pump?

We can check a replacement with the full designation of the pump (series, size, rotor and stator type) and the application data. Equivalences between series are confirmed on the basis of this information.

What data is needed for a quotation on a dosing system?

The product and its viscosity, the abrasiveness, the volume per dose, the flow, the number of components and the mixing ratio, the type of container (cartridge, bucket, drum) and the interface wanted with the machine or the robot.

How do I request a ViscoTec quotation?

Send the ViscoTec code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: ViscoTec Pumpen- u. Dosiertechnik GmbH (manufacturer documentation)