Who is Spirol and what does it make?
Spirol is an American manufacturer of special fasteners, founded in 1948, with production operations in Connecticut, USA, and 15 global locations including Germany, the United Kingdom, Mexico and China. The range includes coiled spring pins and slotted spring pins, solid and special-shaped pins, alignment bushings and dowels, spacers, compression limiters, threaded inserts for plastics and disc springs to DIN EN 16983. For the Romanian market we can quote from the range of precision fasteners and threaded inserts where a conventional screw or rivet cannot keep up with the tolerances or vibration of the application.
A distinctive element of Spirol is its catalogue of over 30,000 standard parts, built on more than 20,000 documented industrial applications, plus in-house installation equipment (pneumatic and manual presses for pins, inserts and compression limiters). The company's niche is coiled spring pins and disc springs, where it offers ranges of diameters and tolerances. The certifications listed in the manufacturer's technical documentation show a focus on automotive and aerospace.
Spirol offers alternatives to conventional rivets or screws where mounting space is limited or vibration calls for elastic fastening. It is especially useful for automotive assembly lines, medical equipment manufacturers and consumer goods manufacturers who need small but critical parts for the operation of the assembly.
What do we supply from the Spirol range?
| Product | Description |
|---|---|
| Coiled Spring Pins | Cylindrical pins made of steel strip wound in a spiral, with radial elasticity that compensates for variations in hole tolerance. Available in standard, heavy duty and light duty variants, according to the shear force required. They are mounted by simple pressing, without a thread and without welding. Typical application: fastening shafts, levers and components subject to vibration in automotive and industrial equipment; the customer must confirm the hole diameter and the material of the assembled components. |
| Slotted Spring Pins | Tubular pins with a longitudinal slot, produced to ISO 8752, with radial elasticity that compensates for variations in hole tolerance. They are used for pivot joints, stops and fixing bearings in housings made of softer alloys. The customer must provide the nominal diameter and the desired length to identify the correct code from the ISO 8752 range. |
| Threaded Inserts for Plastics | A family of metal inserts for a durable thread in plastic components, in press-in, self-tapping, heat/ultrasonic and molded-in variants. The choice depends on the plastic material and the assembly process available. Typical application: electronic housings and automotive components made of engineering plastic, where a thread moulded directly into plastic would wear out quickly with repeated mounting. |
| Disc Springs to DIN EN 16983 | Disc springs (Belleville) made of steel or stainless steel, to DIN EN 16983 (formerly DIN 2093), single or as pre-assembled stacks. They are used for preloading bearings and compensating thermal expansion in bolted joints. The customer must specify the force and stroke required for the right combination of springs in the stack. |
Why Spirol?
- A catalogue of over 30,000 standard fastening parts, with over 20,000 documented industrial applications
- Coiled spring pins with controlled radial elasticity, an alternative to conventional rivets in limited mounting spaces
- Certifications per the manufacturer's documentation, focused on automotive and aerospace
- In-house installation equipment (PMX, CR, HM presses) for repeatable mounting on a production line
Which Spirol codes and series are requested most often?
| Code | Description |
|---|---|
| Coiled Spring Pin Standard Duty | standard coiled spring pin, controlled radial elasticity |
| Coiled Spring Pin Heavy Duty | coiled spring pin for high shear forces |
| Coiled Spring Pin Light Duty | coiled spring pin for light loads, easy mounting |
| Slotted Spring Pin ISO 8752 | standard ISO slotted pin, high retention force |
| Solid Dowel Pin | straight solid pin, for precision alignment |
| Press-N-Lok Barbed Pin | barbed pin, for permanent fixing in plastic |
| Compression Limiter Post Mold | compression limiter mounted after moulding |
| Compression Limiter Molded-In | compression limiter moulded directly into the part |
| Threaded Insert Press-In | threaded insert cold-pressed into plastic |
| Threaded Insert Self-Tapping | self-tapping threaded insert for plastic |
| Threaded Insert Heat/Ultrasonic | threaded insert installed by heat or ultrasound |
| Disc Spring DIN EN 16983 | Belleville disc spring, to DIN EN 16983 |
| Stainless Steel Disc Spring | stainless steel disc spring, for corrosive environments |
| Pre-Assembled Disc Spring Stack | pre-assembled stack of disc springs |
| Precision Metal Shim | precision shim for fine adjustment |
| Vibratory Feeder Systems | vibratory feeder system for small parts |
| Pin Installation Press PMX | manual/pneumatic press for pin installation |
| Threaded Insert Installation Tool HM | installation tool for threaded inserts |
Where is Spirol equipment used?
- Automotive — fastening shafts, levers and components subject to vibration
- Aerospace and defence — fasteners with certifications per the manufacturer's documentation
- Medical — threaded inserts and pins for single-use or reusable devices
- Electronics and household appliances — threaded inserts in engineering plastic housings
- Durable industrial goods — disc springs for preloading and thermal compensation
How do we supply Spirol in Romania?
We bring in Spirol fasteners to order, typically within 1–4 weeks depending on the part requested. We work only from what can be verified in the manufacturer's technical documentation. For a correct quotation we need the part code (or the diameter and length, if you are selecting from an ISO family), the material of the assembled components and the estimated annual quantity.
Installation equipment (PMX, CR, HM presses) is offered on specific request, with availability and lead time stated in the quotation.
Frequently asked questions about Spirol
What products does Spirol make?
Spirol makes special fasteners — coiled and slotted spring pins, threaded inserts for plastic, compression limiters and disc springs to DIN EN 16983. The company has over 30,000 standard parts in its catalogue, used mainly in automotive, aerospace and electronics, where a conventional screw or rivet would not solve the tolerance or vibration problem.
How do I choose a Spirol coiled spring pin by code?
You need the diameter of the hole in which the pin is mounted, the material of the component (to estimate hardness and tolerance) and the shear force it will be subjected to in operation. Spirol classifies coiled spring pins as standard, heavy duty and light duty, according to this force; send us this data and we check the correct variant in the range.
Do you deliver Spirol parts in Romania, and how long does it take?
Yes, we bring in Spirol fasteners to order, typically within 1–4 weeks, depending on the part requested and the manufacturer's confirmation. The exact lead time is confirmed once we receive the code or the technical specifications.
What should I send for a quotation on Spirol threaded inserts?
Please specify the type of plastic of the part (to choose between press-in, self-tapping or heat/ultrasonic variants), the thread diameter required and the assembly process available in your production. With this data we can identify the suitable part in the Spirol range and check the delivery time.
What is the Spirol equivalent of a DIN 2093 disc spring?
Spirol makes disc springs to the updated standard DIN EN 16983, which replaced the old DIN 2093, in steel or stainless steel variants, single or as pre-assembled stacks. For an exact equivalent send us the force and stroke required, and we check the corresponding size in the manufacturer's range.
How do I request a Spirol quotation?
Send the Spirol code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: SPIROL International Corporation (manufacturer documentation)

