Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Sprecher + Schuh supplier in Romania

For Sprecher + Schuh we quote CA7, CA8 and CA9 contactors, CEP7, CEP9 and CT7N overload relays, CET7 electronic starters, KT9 motor controllers, CS7, CS8 and RZ7 relays and PCS and PF soft starters; for a quotation we need the full code, the coil voltage and the rated current.

Founded in 1903

Request a quote

Who is Sprecher + Schuh and what does it make?

Sprecher + Schuh makes low-voltage equipment for motor control and protection: contactors, overload relays, starters, motor controllers, control and timing relays, soft starters, switches and control devices. The company was founded in Aarau, Switzerland, in 1903, and manufactures its products mainly there, with production units in other countries as well. It is found in control panels for pumps, fans, compressors and conveyors.

The contactor family has several series. CA7 is a series of contactors, with CEP7 electronic or CT7N thermal overload relays mounted directly or separately. CA8 is the miniature contactor, used together with CAT8 starters and CT8 overload relays, and CA9 is another series of contactors. For commercial uses there are the CDP and CDP2 definite-purpose contactors, up to 90 A. The current range for contactors runs from 9 A to 1200 A, in AC or DC.

CET7 is an electronic starter with Point-on-Wave switching technology, with direct-on-line start and reversing in the same housing, with no spacing between devices and no derating up to 55 °C, in configurations of 0.75…9 A and 4.6…23 A, controlled at 24 V DC and working up to 480 V AC. KT9 is the series of motor controllers with short-circuit protection, conforming to IEC/EN 60947-2 and 60947-4-1. For a replacement, the exact series, the rated current and the coil voltage matter, not just the size of the housing.

What do we supply from the Sprecher + Schuh range?

ProductDescription
CA7, CA8, CA9, CDP contactorsNon-reversing and reversing contactors for motors and AC and DC loads. CA8 is the miniature series, completed by the CAT8 starters; CDP and CDP2 are definite-purpose contactors for commercial applications up to 90 A.
CEP7, CEP9, CT7N, CT8 overload relaysCEP7 is the electronic relay for CA7 contactors, CEP9 is the electronic variant with communication, and CT7N and CT8 are thermal relays for CA7 and CA8 respectively. They are chosen by the motor's set current range.
CET7 electronic starterStarter with direct-on-line start and reversing in the same housing, electronic overload protection, detection of phase loss, imbalance and welded contacts. It has removable terminals, configurations of 9 A and 23 A and works up to 480 V AC.
KT9 controllers, CS7, CS8, RZ7 relays and PCS, PF soft startersThe KT9 motor controllers protect the motor against short circuit, with variants for high starting current. CS7 and CS8 are control relays, RZ7 is an electronic timing relay, and PCS and PF are the soft starter series.

Why Sprecher + Schuh?

  • Contactors from 9 A to 1200 A — CA7, CA8, CA9, CDP and CDP2 series, in AC or DC
  • Electronic and thermal overload relays — CEP7, CEP9, CT7N and CT8, mounted directly on the contactor
  • CET7 electronic starter — Point-on-Wave switching, no derating up to 55 °C, 0.75…23 A
  • KT9 motor controllers — conforming to IEC/EN 60947-2 and 60947-4-1
  • Control and timing relays — CS7, CS8 and RZ7, including the variant for hazardous areas

Which Sprecher + Schuh codes and series are requested most often?

CodeDescription
CA7Series of contactors
CA8Miniature contactors
CA9Series of contactors
CAT8Starters with CA8 contactors
CDPDefinite-purpose contactors
CDP2Definite-purpose contactors, up to 90 A
CEP7Electronic overload relay for CA7
CEP9Electronic overload relay with communication
CT7NThermal overload relay for CA7
CT8Thermal overload relay for CA8
CET7Electronic motor starter, 9 A and 23 A
KT9Motor controllers with short-circuit protection
CS7Control relays for heavy loads
CS8Miniature control relays
RZ7Electronic timing relays, with a variant for hazardous areas

Where is Sprecher + Schuh equipment used?

  • Control panels for pumps, fans and compressors — contactors and motor protection
  • Machines with several motors — compact CET7 and CAT8 starters
  • Commercial and air-conditioning installations — CDP definite-purpose contactors
  • Hydraulic lifts — soft starters from the PCEC series
  • Hazardous areas — timing relay with a variant for explosive atmospheres RZ7

How do we supply Sprecher + Schuh in Romania?

We can quote Sprecher + Schuh contactors, overload relays, CET7 starters, KT9 controllers, control relays and soft starters. For a quotation, send the full code from the device, the coil voltage and type (AC or DC), the rated current or the setting range and, for relays, the function or the time range. An item can ship in 24–72 h when the item is in stock, locally or at the supplier. For the rest we bring in to order, usually in 1–4 weeks, and the final lead time appears in the quotation.

For devices discontinued from the range, we confirm the replacement based on the full code and the electrical data, not on a similar series.

Frequently asked questions about Sprecher + Schuh

What does Sprecher + Schuh make?

Sprecher + Schuh makes low-voltage switchgear for motor control and protection: contactors, overload relays, starters, motor controllers, control and timing relays, soft starters and control devices. The company was founded in 1903, in Aarau, Switzerland.

How does CA7 differ from CA8?

CA7 is a series of contactors on which the CEP7 or CT7N relays are mounted directly. CA8 is the miniature series, completed by the CAT8 starters and the CT8 overload relays. Choose by the load current and the space in the panel, and we confirm the fit based on the code.

How long does it take to get a Sprecher + Schuh CA7 contactor?

A device can ship in 24–72 h when the item is in stock, locally or at the supplier. For the others we bring in to order, usually in 1–4 weeks, and depending on the specifications the lead time can be longer. We confirm it in the quotation.

Can I replace an old contactor with one from the new series?

Sometimes yes, but we check the rated current, the coil voltage, the number of auxiliary contacts and the mounting dimensions. Send the full code or a photo of the nameplate, and we establish interchangeability from these data.

What data do I send for a quotation on a CET7 electronic starter?

The code on the device, the control voltage (for example 24 V DC), the motor current or power, the type of start (direct or reversing) and, for time relays, the function and the time range. With these we identify the right series, for example CET7 or CAT8.

How do I request a Sprecher + Schuh quotation?

Send the Sprecher + Schuh code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Sprecher + Schuh (manufacturer documentation)