Zenner supplier in Romania
For Zenner we quote water meters (multi-jet, piston, Woltman, ultrasonic), zelsius and multidata heat meters and Atmos diaphragm gas meters, plus EVC volume correctors; for a quotation we need the type, the nominal diameter and the nameplate data.
Headquarters: Saarbrücken, Germany
Who is Zenner and what does it make?
Zenner makes meters for water, heat energy and gas, intended for utility networks and buildings. The company is based in Saarbrücken, Germany. The meters are installed at service connections, in metering stations, in heating plants and in industrial installations that bill or allocate consumption.
For water, the range includes multi-jet meters with dry or wet dial (series MTKD, MTWD, MNK and MNKD), single-jet meters (ETKD, ETWD), piston meters (RTKD, RNK-RP-N, RTKP-MF-M-CC) and Woltman turbine meters for high flow rates: WPD and WPHD with the turbine axis parallel, WSD with the axis perpendicular, WBD for well water and WI-N for irrigation. IUW is an ultrasonic meter for drinking water in networks and in industry.
For heat energy, the compact zelsius C5 meters (variants CMF, ISF and IUF) are complemented by meters with a separate calculator: the IUF ultrasonic sensor, for DN 50 to DN 300, and the multidata WR3 calculator. The total range runs from DN 15 to DN 300. For gas there are Atmos diaphragm meters in several sizes, Atmos XL industrial and commercial versions, turbine meters and EVC electronic volume correctors.
Some meters have radio communication modules, with LoRaWAN or wireless M-Bus, for remote reading.
What do we supply from the Zenner range?
| Product | Description |
|---|---|
| Multi-jet, single-jet and piston water meters | Series MTKD, MTWD, MNK, MNKD, ETKD, ETWD, RTKD, RNK-RP-N and RTKP-MF-M-CC, with dry or wet dial, for cold and hot water. They are chosen by nominal diameter, installation position, installation length and nominal flow rate. |
| Woltman meters and the IUW ultrasonic meter | WPD and WPHD with parallel turbine, WSD with perpendicular turbine, WBD for well water and WI-N for irrigation, which tolerates impurities of up to 30%. IUW is the ultrasonic version, for drinking water in distribution networks and industry. |
| zelsius and multidata heat energy meters | Compact zelsius C5-CMF, C5-ISF and C5-IUF meters, the latter also for cooling installations, plus meters with a separate multidata WR3 calculator and IUF sensors with a nominal flow rate of 15 to 600 m³/h. The range covered runs from DN 15 to DN 300. |
| Atmos gas meters and EVC correctors | Atmos diaphragm meters from G1.6 to G25, with temperature-compensated, turbine and rotary variants, plus the EVC electronic volume corrector. The Atmos XL models are for industrial and commercial consumers. |
Why Zenner?
- Water, heat and gas meters in the same range — a single brand for the utilities of a building or an industrial site
- Woltman meters WPD, WPHD and WSD — for main pipelines, with high flow rates
- IUW ultrasonic meter and IUF sensor — ultrasonic measurement, for water and heat energy
- Range from DN 15 to DN 300 for heat meters — from an apartment to district heating networks
- LoRaWAN or wireless M-Bus radio communication modules — remote reading with no trip to the field
Which Zenner codes and series are requested most often?
| Code | Description |
|---|---|
| MTKD-M | Multi-jet water meter with dry dial |
| MNK-RP-N | Multi-jet water meter with wet dial |
| RTKP-MF-M-CC | Piston water meter |
| WPD | Woltman meter with parallel turbine |
| WSD | Woltman meter with perpendicular turbine |
| WI-N | Woltman meter for irrigation |
| IUW | Ultrasonic water meter for high flow rates |
| zelsius C5-IUF | Compact ultrasonic heat meter |
| zelsius C5-CMF | Compact heat energy meter, with measuring capsule |
| multidata WR3 | Calculator for heat meters |
| Atmos XL | Industrial and commercial diaphragm gas meter |
| EVC | Electronic volume corrector for gas |
Where is Zenner equipment used?
- Drinking water networks — Woltman meters and IUW ultrasonic meters
- District heating and heating plants — zelsius and multidata meters
- Irrigation — WI-N meters, which tolerate impurities
- Gas distribution — Atmos diaphragm meters and EVC correctors
- Buildings with consumption allocation — meters with radio reading
How do we supply Zenner in Romania?
We can quote Zenner meters for water, heat energy and gas, in the MTKD, WPD, IUW, zelsius, multidata and Atmos series. For an accurate quotation, send the meter type from the nameplate, the nominal diameter (DN), the nominal flow rate, the installation length and, for heat meters, the working temperatures. For a replacement, an old meter is enough as a model: we check the length and the connections. We bring them in to order. An item can ship in 24–72 h when the item is in stock, locally or at the supplier; otherwise usually 1–4 weeks, and the lead time may be longer depending on specifications and is confirmed in the quotation.
Meters intended for billing are quoted with the metrological verification required in the installation, which we confirm together with the variant before ordering.
Frequently asked questions about Zenner
What families of Zenner meters exist: multi-jet, Woltman, zelsius for heat and Atmos for gas?
Water, heat energy and gas meters, plus radio communication modules. The company is based in Saarbrücken, Germany. The range includes multi-jet, piston, Woltman and ultrasonic meters, zelsius for heat and Atmos for gas.
How do I choose the Woltman meter for a main pipeline?
By nominal diameter, flow rate and pipe position. WPD and WPHD have the turbine parallel to the pipe, WSD perpendicular, WBD is for well water, and WI-N for water with impurities in irrigation. Send the DN and the flow rate and we check the suitable series.
Do you supply Zenner meters in Romania and how fast?
We bring in meters to order. Meters can ship in 24–72 h when the item is in stock, locally or at the supplier; the others usually in 1–4 weeks, and large quantities or variants with a radio module may take longer. The lead time is confirmed in the quotation.
Can I replace an old meter with a Zenner one?
Usually yes, if the DN, the installation length, the connections and the nominal flow rate match. Send the nameplate or a photo of the existing meter, and we check whether one of the MTKD, MNK or Woltman series fits without pipe modifications.
How do I request a quotation for a zelsius heat meter?
The type (compact or with separate calculator), nominal diameter or nominal flow rate, flow and return temperatures, installation position and whether radio communication is required. For the multidata WR3 calculator, add the flow sensor type.
How do I request a Zenner quotation?
Send the Zenner code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: ZENNER International GmbH & Co. KG (manufacturer documentation)

