Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Industrial and precision gearboxes

The gearbox reduces the speed of a motor and increases the output torque. Precision gearboxes (planetary, cycloidal, strain wave) have low angular backlash and are used on servo drives and robots; industrial power gearboxes (helical, bevel, worm) drive belts, extruders, agitators and cranes.

A gearbox transmits motion from the motor to the machine through a gear train and changes speed for torque. Planetary gearboxes have coaxial input and output shafts, are compact and have low angular backlash. Cycloidal ones use an eccentric disc and give high ratios in compact dimensions, with very low backlash, while harmonic (strain wave) gearboxes are small and have high ratios, usually with zero backlash, which is why they are found in robot joints. Bevel and hypoid gearboxes change the axis direction, usually by 90°, worm gearboxes give a high ratio in a single stage, and industrial helical and bevel-helical gearboxes, sometimes made to order, take high power on extruders, rolling mills, turbines and mining installations. Angular backlash is expressed in arc minutes and matters for positioning, not for continuous power drives.

How to choose

Nominal torque, maximum torque and gear ratio

The required output torque is calculated from the load and accelerations, and the maximum torque from emergency-stop and shock peaks. The ratio follows from the motor speed and the speed required at the machine.

Angular backlash and stiffness

For positioning axes, robots and rotary tables, choose a gearbox with low backlash, expressed in arc minutes, and high torsional stiffness. For belts, agitators or extruders, backlash is not a criterion; power capacity is what matters.

Gear type and design form

Coaxial (planetary), right-angle (bevel, hypoid, worm), with hollow shaft or output flange: the form is matched to the space available and the way it connects to the machine.

Duty and service factor

Repeated start-stop cycles, shocks and continuous operation call for a higher service factor than uniform operation. Service life is calculated on the real duty, not the nominal one.

Environment, lubrication and hygiene

Dust, washdown water, extreme temperatures or food requirements call for suitable seals, protection ratings and greases; hygienic gearboxes are supplied in stainless steel or with special coatings.

Coupling to the motor and interface

The input flange, motor shaft diameter and moment of inertia must match the servo motor or induction motor chosen, otherwise the gearbox cannot be mounted directly.

What to send for a quotation

  • The code or nameplate of the existing gearbox, if one is being replaced.
  • The output torque required (nominal and maximum) and the input speed.
  • The gear ratio wanted and the maximum angular backlash accepted.
  • The motor or servo motor to be coupled: flange, shaft, power.
  • The duty: hours per day, number of starts, shocks, installation environment.
  • The quantity required and the delivery date wanted.

Typical applications

  • Industrial robots and positioning axes
  • Machine tools and rotary tables
  • Extruders, rolling mills and turbines
  • Cranes, mobile machinery and mining installations

Maintenance and spare parts

Gearboxes are checked periodically for lubricant level and condition, operating temperature, noise and output backlash. A degraded lubricant or a worn seal are frequent causes of failure. On high-power gearboxes, oil analysis and vibration measurement show wear early. The spare parts usually requested are seals, bearings and the prescribed lubricant.

Brands we quote for this product type

Frequently asked questions

What is the difference between a planetary, a cycloidal and a harmonic gearbox?

The planetary gearbox uses gears around a central sun gear and is compact and efficient. The cycloidal one uses an eccentric disc with rollers and offers high ratios in compact dimensions, with very low backlash. The harmonic one deforms a flexible element and offers high ratios in small dimensions, usually with zero backlash.

What does the angular backlash of a gearbox mean?

It is the angle through which the output shaft can turn when the input shaft is locked, expressed in arc minutes. Low backlash gives precise positioning and reversals of direction without lost motion; for continuous power drives it is not a main criterion.

When do I choose a worm gearbox and when a planetary one?

The worm gearbox gives a high ratio in a single stage and a right-angle output, with lower efficiency than helical gears, especially at high ratios. The planetary one is coaxial, compact, with high efficiency and low backlash, so it suits servo drives and positioning axes.

Can a gearbox be built to order for a special machine?

Yes, for high power, special speeds or several output shafts, gearboxes are designed to order, based on torque, speeds and the space available. For the request, process data and the installation drawing are needed.

What do I send for a gearbox quotation, and how long does delivery take?

The torque and speed, the ratio, the backlash accepted, the motor interface, the duty and, for a replacement, the nameplate data are needed. Delivery is to order, usually 1–4 weeks, depending on the manufacturer and the version chosen; gearboxes built to order can take longer.

Updated: 2026-11-12