Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Albany Pumps supplier in Romania

For Albany Pumps we quote gear pumps from the GA, GC, GE and GT series, twin-screw pumps from the SA–SE series and internal lobe pumps LA and LB; the item is identified by series, pumped medium, viscosity and discharge pressure.

Founded in 1901 · Headquarters: Lydney, Gloucestershire, United Kingdom

Request a quote

Who is Albany Pumps and what does it make?

Albany Pumps makes positive displacement pumps at Lydney, in Gloucestershire, in the United Kingdom, and the company has existed since 1901. Positive displacement pumps move a fixed quantity of liquid with each rotation, so they suit viscous liquids, from water at 1 cSt to thick pastes. The range includes three families: external gear pumps (G series), twin-screw pumps (S series) and internal lobe pumps (L series), plus a centrifugal pump for special orders.

The G series has 18 versions, from GA, for general use, to GC, for compressors and turbines, GE and GF, for foam concentrate, GG, for oil and gas, and GT, with extended service life. Flow rates start at 5 l/min and reach 2,000 l/min, pressure goes up to 40 bar, and the liquids can be up to 320 °C and have a viscosity of up to 250,000 cSt. The twin-screw pumps, the SA–SE series, reach 1,000 m³/h, usually at 25 bar and on some models at 50 bar, with flanges of up to 8 inches. The L series, with internal lobes, in the LA versions for high viscosity and LB for low viscosity, reaches 350 m³/h and 25 bar.

For the lubrication of gas turbines and air compressors, Albany makes gear pumps that work as main, auxiliary or emergency pump, often driven directly by the turbine. The applications also include hot asphalt, molten sulphur, molasses, bitumen and crude oil.

What do we supply from the Albany Pumps range?

ProductDescription
G series gear pumpsPositive displacement pumps with external gears, horizontal, vertical or tank-mounted, with spur or helical gears. Flow of 5–2,000 l/min, pressure up to 40 bar. Versions include: GA general use, GC compressors and turbines, GE foam concentrate, GT extended life.
S series twin-screw pumpsSA–SE versions: with internal seal, with external bearing, vertical, plus SX supplied to order. Capacity up to 1,000 m³/h and pressures usually of 25 bar, on some models 50 bar. Applications include crude oil, fuel oil, aviation kerosene, bitumen and asphalt.
L series internal lobe pumpsLA for high-viscosity products, LB for low-viscosity products, LX for special orders. Pressure up to 25 bar, capacity up to 350 m³/h, with a steam heating jacket option. They are used for molasses, syrup, soap, paint and bitumen.
Turbine and compressor lubrication pumpsGC, GA and GT gear pumps for the lubrication circuits of gas turbines, air compressors and large diesel engines. The pump can be driven directly by the turbine, and the circuit usually includes an auxiliary pump and, if needed, an emergency pump.

Why Albany Pumps?

  • Three construction principles in the same family, gears, twin screws and internal lobes: the choice is made by viscosity and pressure
  • The GC series for the lubrication of turbines and compressors: gear pumps used as main, auxiliary or emergency pump
  • Pumps for liquids from 1 cSt (water) to thick pastes, with the same selection logic
  • GE and GF versions for foam concentrate: for foam fire-fighting systems, with the GE version VdS approved
  • Lubrication and transfer pumps for hot liquids: up to 320 °C in the gear pump series

Which Albany Pumps codes and series are requested most often?

CodeDescription
GAExternal gear pump, general use
GBGear pump, heated version
GCGear pump for compressors and turbines
GEFoam concentrate pump, with VdS-approved version
GFLow-viscosity foam concentrate pump
GGGear pump for oil and gas
GTGear pump with extended service life
SATwin-screw pump, with internal seal
SBTwin-screw pump, with external bearing
SDTwin-screw pump, vertical, with internal seal
LAInternal lobe pump for high viscosity
LBInternal lobe pump for low viscosity

Where is Albany Pumps equipment used?

  • Gas turbines and air compressors: GC, GA and GT lubrication pumps
  • Oil, petroleum products and bitumen: twin-screw pumps for crude oil, fuel oil and asphalt
  • Foam fire-fighting systems: GE and GF pumps for concentrate
  • Food industry: internal lobe pumps for molasses and syrup
  • Paints, resins and soap: gear and lobe pumps for viscous products

How do we supply Albany Pumps in Romania?

We can quote Albany gear, twin-screw and internal lobe pumps, together with spare parts. For a quotation we need the series or the code from the pump nameplate, for example GC or SA, the pumped medium with its temperature and its viscosity in cSt, the flow and the discharge pressure, the type of drive, and the mounting position, horizontal or vertical. For lubrication pumps, state whether it is a main, auxiliary or emergency pump. The pumps are ordered; depending on the series, the lead time is usually 1–4 weeks and can be longer for the versions supplied to order. Parts can ship in 24–72 h when the item is in stock, locally or at the supplier.

For pumps with performance at the limit of the range, for example high pressure with high viscosity, the configuration is determined from the process data in your request.

Frequently asked questions about Albany Pumps

What types of pumps does Albany Pumps make?

Albany makes positive displacement pumps with external gears (G series), twin screws (S series) and internal lobes (L series), plus a centrifugal pump for special orders. They are used for liquids from water to viscous pastes, for lubrication, for transfer of petroleum products and for foam concentrate.

When do I choose a twin-screw pump instead of a gear pump?

Twin-screw pumps, S series, are for high flow rates, up to 1,000 m³/h, and for products such as crude oil, fuel oil or bitumen. Gear pumps, G series, suit lower flow rates, up to 2,000 l/min, but at pressures of up to 40 bar. Send us the flow, the pressure and the viscosity.

Do you supply Albany pumps in Romania and how soon?

Yes. Pumps and parts are supplied to order, usually in 1–4 weeks. Parts can ship in 24–72 h when the item is in stock, locally or at the supplier. Twin-screw pumps or special configurations may need more time; the exact lead time appears in the quotation.

Can I replace a gear pump on a lubrication circuit?

It can be done if the connection dimensions, the direction of rotation, the flow and the pressure match. For the GC series, the drive mode also matters, directly from the turbine or with an electric motor. Send us the series, the nameplate and the circuit data, and we check the version that fits.

What data do I give for an Albany pump from the GA, SA or LA series?

The pumped medium with its density, temperature and viscosity in cSt, the flow wanted, the suction and discharge pressure, the preferred material and the type of drive. If you are replacing an existing pump, add the series from the nameplate. For foam pumps we also need the VdS approval requirement.

How do I request a Albany Pumps quotation?

Send the Albany Pumps code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Albany Engineering Company Ltd (manufacturer documentation)