ARNOLD UMFORMTECHNIK supplier in Romania
For ARNOLD we quote TAPTITE 2000, SHEETITE, REMFORM and ALUfast screws, FLOWFORM elements and CONFORM cold-formed parts; for a quotation we need the drawing or part code, the diameter, the length and the material of the joint.
Headquarters: Forchtenberg-Ernsbach, Germany
Who is ARNOLD UMFORMTECHNIK and what does it make?
ARNOLD UMFORMTECHNIK is a German manufacturer of cold-formed fasteners, joining systems and multifunctional parts, based in Forchtenberg-Ernsbach with a second site at Dörzbach. The range includes screws that form their own thread in metal, sheet metal and plastic (TAPTITE 2000, SHEETITE, REMFORM), aluminium screws (ALUfast), a screw system for trailer floors, joining processes (FLOWFORM, FLOWWELD, FLEXWELD), feeding and pressing technology (FEEDTEC), stamped parts and cold-formed parts from the CONFORM series.
The TAPTITE 2000 screw is driven directly into a cast or drilled hole, without prior tapping, which removes the thread-cutting operation and the additional locking element. The FLOWFORM screw heats up, pierces the sheet, forms a collared hole in it and then cuts the thread; the thread is made so that it accepts a standard metric screw on repair. ALUfast is made from EN AW 6056 alloy (class AL9) and is used mainly in lightweight construction in the automotive industry, in combination with aluminium, magnesium or plastics, where the low modulus of elasticity of aluminium gives more flexibility than steel.
For a maintenance department or a machine builder, the interest lies in replacing special screws, fastening systems or cold-formed parts supplied with foreign-built equipment. The CONFORM series covers parts with complex outer contours, blind and through holes, and shafts for small and medium electric motors, and a test centre analyses joints, screw failures and loads.
What do we supply from the ARNOLD UMFORMTECHNIK range?
| Product | Description |
|---|---|
| Thread-forming screws: TAPTITE 2000, SHEETITE, REMFORM | TAPTITE 2000 for joints in metal, without prior tapping; SHEETITE for direct fastening in sheet metal; REMFORM for direct fastening in plastic. All of them form the thread they are driven into and avoid a nut or a separate operation. |
| ALUfast and the trailer floor system | ALUfast is a range of aluminium screws (EN AW 6056, AL9) for lightweight construction. For trailers there is a floor screw system, with the standard M8 floor screw. |
| Joining processes: FLOWFORM, FLOWWELD, FLEXWELD | FLOWFORM heats up, pierces the sheet, forms a collared hole and cuts the thread. FLOWWELD is friction welding of an element, and FLEXWELD is resistance welding. Besides these there are pressing, self-piercing riveting and electrical screw connections. |
| CONFORM and technical cold-formed parts | Multifunctional parts with complex outer contours, blind or through holes, short parts that are hard to handle, cold-formed and heat-treated in the same plant. They include shafts for small and medium electric motors, bushings and stamped parts. |
Why ARNOLD UMFORMTECHNIK?
- TAPTITE 2000 — a screw that forms its thread in cast or drilled parts, without prior thread cutting
- FLOWFORM — direct joining of thin sheets, with a cycle time under 4 seconds and a thread for a standard metric screw on repair
- ALUfast in EN AW 6056 alloy (AL9) — aluminium screws for lightweight construction, especially in the automotive industry
- FLOWWELD and FLEXWELD joining processes — friction welding and resistance welding of fasteners, respectively
- Test centre — analysis of joints and screw failures, and load testing
Which ARNOLD UMFORMTECHNIK codes and series are requested most often?
| Code | Description |
|---|---|
| TAPTITE 2000 | Screw that forms its thread in metal, without prior tapping |
| ALUfast | Aluminium screws EN AW 6056 (AL9) |
| SHEETITE | Direct fastening in sheet metal |
| REMFORM | Direct fastening in plastic |
| FLOWFORM | Screw that forms a collared hole and cuts the thread in sheet metal |
| FLOWWELD | Joint made by friction welding of elements |
| FLEXWELD | Joint made by resistance welding of elements |
| MATHREAD | Screw tip (dog point) for guidance |
| TORX PLUS | Drive system for screws |
| LOCTEC | Safety drive systems |
| THREADLOC | Chemical thread locking |
| ARNOLD SEAL | Surface treatment for screws |
| CONFORM | Multifunctional cold-formed parts |
| FEEDTEC | Feeding and pressing systems |
Where is ARNOLD UMFORMTECHNIK equipment used?
- Automotive and electric mobility — screws for lightweight construction and battery joints
- Machine building — cold-formed fasteners, supplied to order
- Trailers and vehicles — screw systems for floors
- Electrical engineering — electrical screw connections and shafts for small motors
How do we supply ARNOLD UMFORMTECHNIK in Romania?
We can quote ARNOLD fasteners (TAPTITE 2000, SHEETITE, REMFORM, ALUfast) and cold-formed parts, mainly as replacement items for existing equipment or for small series. Standard ARNOLD screws can ship in 24–72 h when the item is in stock, locally or at the supplier; otherwise they are supplied to order, usually in 1–4 weeks. For special parts, feeding systems or large series, depending on the specification, the lead time can be longer. For a correct request we need the drawing or part code, the standard, the diameter and length, the material and strength class, the head type and drive system, the surface treatment and the material the screw goes into.
A special part is made from the drawing or the joint data; quantities and lead times for large series are agreed separately.
Frequently asked questions about ARNOLD UMFORMTECHNIK
What does ARNOLD UMFORMTECHNIK make?
ARNOLD makes cold-formed fasteners and joining systems in Germany: thread-forming screws (TAPTITE 2000, SHEETITE, REMFORM), ALUfast aluminium screws, FLOWFORM, FLOWWELD and FLEXWELD processes, FEEDTEC feeding systems and CONFORM parts. The range serves mainly the automotive industry and equipment builders.
How do I choose between TAPTITE 2000, SHEETITE and REMFORM?
The choice depends on the material the screw goes into: TAPTITE 2000 for metal (cast or drilled parts), SHEETITE for sheet metal, REMFORM for plastic. The diameter, length, strength class and tightening torque also matter. It helps us to know the material of the joint, its thickness and the diameter of the pilot hole.
Do you supply ARNOLD in Romania and how fast?
Yes, to order. Screws and cold-formed parts: 24–72 h when the item is in stock, locally or at the supplier; otherwise, supplied to order, usually in 1–4 weeks. For special parts, FEEDTEC systems, FLOWFORM processes and large series, depending on the specification, the lead time can be longer, confirmed in the quotation after we receive the drawing.
Can I replace a special screw or a cold-formed part with an ARNOLD version?
It is checked from the drawing and the joint data: the standard or the part drawing, the diameter, the length, the material and class, the head type, the drive system and the surface treatment, plus the material the screw goes into. Equivalence is confirmed from this data, not from appearance alone; we identify which part in the range covers the requirement.
What do I need to send for a quotation on a FLOWFORM screw or a CONFORM part?
For FLOWFORM: the sheet materials and thicknesses, the screw diameter and the access to the joint. For CONFORM: the part drawing, the material, the heat treatment, the tolerances and the annual quantity. For large series, add the delivery rhythm. From this data it is established whether the part can be cold-formed.
How do I request a ARNOLD UMFORMTECHNIK quotation?
Send the ARNOLD UMFORMTECHNIK code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: ARNOLD UMFORMTECHNIK GmbH & Co. KG (manufacturer documentation)

