Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Berthold Technologies supplier in Romania

Radiometric level and density systems, microwave moisture analysers

Founded in 1949 · Headquarters: Bad Wildbad, Germany

Request a quote

Who is Berthold Technologies and what does it make?

Berthold Technologies is a privately owned German company from Bad Wildbad, founded in 1949 as a nuclear measurement laboratory and still in the field of nuclear and optical measurement after more than 70 years. The part of interest to a process engineer is the process control division: radiometric systems for level and density, microwave moisture and concentration analysers, radiation monitors for trucks and scrap metal. The company has more than 350 employees, and separately it also makes laboratory instruments, for example luminometers, which are outside our offer.

The radiometric principle solves the cases where a sensor touching the product does not last: tanks under high pressure and temperature, abrasive or corrosive media, vessels with agitators or thick walls. A detector mounted on the outside of the vessel or pipe measures how much of the gamma radiation from a shielded source passes through the material, and the level or density is deduced from the attenuation, without contact with the product and without moving parts. For density, the system is fixed on the outside of pipes with diameters from 25 mm to more than 1000 mm. In continuous steel casting, its mould level systems are used on thousands of casting lines.

In Romania, such equipment appears in refineries, steelworks, power plants, paper mills, and the chemical and sugar industries, usually as a solution chosen at the project stage or as a spare part for existing installations. Being systems with a radioactive source, they involve specific regulatory formalities, which are clarified together with the quotation request.

What do we supply from the Berthold Technologies range?

ProductDescription
SENSseries LB 480Compact detector for continuous level, level switch and density, with integrated electronics, HART and versions with functional safety, as stated in the manufacturer's documentation. It is mounted on the outside of tanks and pipes in the chemical, power and oil industries.
LoopSeries LB 4302-wire detector for level, level switch and density, based on a silicon photomultiplier (SiPM). As a 2-wire detector, it integrates simply into existing installations.
MicroPolar LB 567 / LB 568Microwave moisture analysers for material on a belt or in a chute, without contact with the product. LB 568 is used when the bulk density varies, and LB 567 when the measuring conditions are constant.
Mould level systemsRadiometric measurement of the liquid metal level in continuous steel casting, with a cycle time of 5 ms, for control at start-up and in normal operation. They are used on slab, billet and section moulds.

Why Berthold Technologies?

  • Measurement without contact with the product — the detector is mounted on the outside of the vessel or pipe, so it withstands temperatures, pressures and aggressive media that destroy conventional probes
  • The SENSseries LB 480 detector combines level, level switch and density — it has integrated electronics, HART communication and declared SIL certification
  • LoopSeries LB 430 is a 2-wire detector with SiPM technology — easier to integrate into an existing loop
  • Density on pipes from 25 mm to more than 1000 mm, regardless of fluid velocity — the system clamps on the outside, without stopping the line
  • Varied scope in a single company — level, density, bulk material flow, microwave moisture and radiation monitoring

Which Berthold Technologies codes and series are requested most often?

CodeDescription
LB 480SENSseries detector for level, level switch and density
LB 430LoopSeries 2-wire detector for level and density
LB 414SmartSeries gamma detector for density
LB 470DuoSeries system for continuous level
LB 476Continuous level system
LB 473DuoSeries for level switch
LB 471Radiometric mini level switch
LB 474DuoSeries for density measurement
LB 472DuoSeries for bulk material flow
LB 567MicroPolar, microwave moisture analyser, constant conditions
LB 568MicroPolar Moist, for variable bulk density
LB 566MicroPolar, online microwave concentration analyser
LB 565MicroPolar Brix, concentration measurement
LB 452CastXpert, mould level
EmulsionSENSMulti-phase level measurement, accuracy ±25 mm
RadSpectRadiation monitoring portal for vehicles

Where is Berthold Technologies equipment used?

  • Refineries and petrochemicals — level and density in FCC, coking and alkylation processes
  • Steelmaking — steel level in the mould and furnace limiters
  • Power and paper — level in digesters, moisture on fuel belts
  • Chemicals and water treatment — concentrations and densities of sludges and solutions
  • Recycling and waste — radiation monitoring portals for vehicles

How do we supply Berthold Technologies in Romania?

We can quote Berthold radiometric systems and process analysers, from detectors and transmitters to shielding and sources, based on a specific technical request. Supplied to order; for equipment configured to the application, the lead time can be longer than usual and is confirmed in the quotation. For a correct proposal we need the measured quantity (level, density, moisture), the pipe diameter or the vessel dimensions, the wall thickness, the temperature and pressure, the product and the nameplate of the existing installation, if it is a replacement. The formalities related to the radioactive source are clarified before ordering.

The source and activity required are determined from the vessel and product data, and the handling and installation of radioactive sources are outside our offer.

Frequently asked questions about Berthold Technologies

What does Berthold Technologies make for the process industry?

The process control division makes radiometric level and density systems, microwave moisture and concentration analysers, systems for steel level in the mould and radiation monitoring portals. Measurement is made without contact with the product, from the outside of the vessel or pipe.

When does a radiometric measurement make sense instead of a conventional level transmitter?

When the product is hot, abrasive, corrosive or under high pressure, when the vessel has agitators, complicated internals or thick walls. The attenuation of the radiation does not depend on pressure, temperature or chemical properties. For selection we need the vessel dimensions, the wall thickness and the product.

Do you supply Berthold equipment in Romania and within what lead time?

Yes, to order, with a lead time that depends on the system type. Detectors and transmitters are ordered usually in 1–4 weeks, but systems with sources and shielding configured to the application have a longer lead time. The duration and the formalities for the radioactive source are stated in the quotation.

Can I replace an old Berthold detector with a current one?

It depends on the series and on the existing source. Compatibility is established from the exact code. Send us the marking on the nameplate of the detector or transmitter (LB series), the source type and photos of the installation, and we check the replacement options before the quotation.

What information do I need for a quotation on a density measurement?

The pipe diameter and wall thickness, the product and the density range, the temperature and pressure, the space available for the shielding and detector, and whether SIL is required. On pipes, the system clamps on the outside, between 25 mm and more than 1000 mm, so the pipe stays in operation.

How do I request a Berthold Technologies quotation?

Send the Berthold Technologies code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Berthold Technologies (manufacturer documentation)