BTG Mütek supplier in Romania
For BTG Mütek we quote MEK STRATUS, ACT STRATUS and TCR PeakTotal transmitters, Mütek PCD-06, SPC-5500 and SZP-16 analysers, the SPF-5500 analyser and the BT-5500 brightness transmitter; we need the model, the range and the pipe data.
Who is BTG Mütek and what does it make?
BTG Mütek is a line of process measurement and analysis instruments for the pulp and paper industry: consistency transmitters, analysers for electric charge and zeta potential, drainability analysers, analysers for free and dissolved gases, for fibre morphology and for brightness. We quote only these measuring instruments; rods, blades and knives for the paper machine are outside our offer. The products serve pulp mills and tissue, board and graphic paper mills.
Stock consistency is measured with transmitters mounted directly on the pipe: MEK STRATUS, rotary, for 1–16 %, with dual torque and no sealing water, ACT STRATUS with an oscillating element, for 1–7 %, MBT-2500 with an active blade, for 1.5–8 %, TCT PeakOne for total consistency of 0.01–3 % and TCR PeakTotal for 0.5–16 %. For wet-end chemistry, Mütek PCD-06 measures the charge of dissolved colloidal substances, SPC-5500 does the same continuously, by automatic titration with an oppositely charged polyelectrolyte, and SZP-16 determines the zeta potential of fibres and pigments. SPF-5500 measures the drainability of the stock directly on the pipe, SPM-5550 determines the length, width and shape of fibres, GAS-70 detects free and dissolved gas, and BT-5500, BT-5510 and BT-5520 are brightness transmitters. The FXS filtrate extractor resists acids, alkaline solutions and bleaching agents.
The choice is made by the type of measurement (consistency, charge, drainability, gas), the consistency range, the mounting location and the material in contact with the process. The request must also state the output signal required by the control system.
What do we supply from the BTG Mütek range?
| Product | Description |
|---|---|
| Consistency transmitters | MEK STRATUS rotary (1–16 %), ACT STRATUS with an oscillating element (1–7 %), MBT-2500 with an active blade (1.5–8 %), TCT PeakOne (0.01–3 %) and TCR PeakTotal (0.5–16 %), which are mounted directly on the pipe. |
| Mütek charge instruments | PCD-06 measures the charge of dissolved colloidal substances in samples, SPC-5500 is the online analyser of the same quantity, by titration with a polyelectrolyte, and SZP-16 determines the zeta potential of fibres, pigments and other solids in aqueous suspensions. |
| Drainability and fibre analysers | SPF-5500 measures the drainability of the stock directly on the pipe, and SPM-5550 determines the length, width and shape of fibres, fines and shives, for controlling the refining and screening process. |
| Brightness, gas and sampling | BT-5500, BT-5510 and BT-5520 measure the brightness of the stock and control bleaching, GAS-70 detects free and dissolved gas for dosing deaeration agents, and the FXS extractor takes filtrate samples from pressurised pipes. |
Why BTG Mütek?
- Consistency on four principles — rotary (MEK STRATUS), with an oscillating element (ACT STRATUS), with an active blade (MBT-2500) and optical (PeakOne, PeakTotal)
- Electric charge in the laboratory and online — PCD-06 on samples, SPC-5500 in the flow, with automatic titration and up to two sampling points
- SZP-16 for fibres and pigments — the zeta potential is compared before and after contact with chemical additives
- SPF-5500 mounted on the pipe — the drainability of the stock is read continuously, with samples taken directly from the process
- Filtrate extractor in titanium or stainless steel — FXS resists acids, alkaline solutions and bleaching agents, for pH analysers and other instruments
Which BTG Mütek codes and series are requested most often?
| Code | Description |
|---|---|
| MEK STRATUS | Rotary consistency transmitter, 1–16 % |
| ACT STRATUS | Consistency transmitter with an oscillating element, 1–7 % |
| MBT-2500 | Consistency transmitter with an active blade, 1.5–8 % |
| TCT PeakOne | Total consistency transmitter, 0.01–3 % |
| TCR PeakTotal | Total consistency transmitter, 0.5–16 % |
| PCD-06 | Mütek particle charge detector |
| SPC-5500 | Online charge analyser, with automatic titration |
| SZP-16 | Mütek zeta potential measurement system |
| SPF-5500 | Drainability analyser mounted on the pipe |
| SPM-5550 | Online fibre morphology analyser |
| GAS-70 | Free and dissolved gas analyser |
| BT-5500 | Brightness transmitter |
| BT-5510 | Brightness transmitter for thick walls |
| BT-5520 | Brightness transmitter with a long probe |
| FXS | Filtrate extractor for pressurised pipes |
| VCU-1000 | Valve control unit for FXS |
Where is BTG Mütek equipment used?
- Pulp — consistency, brightness and filtrate from pipes
- Tissue paper — consistency transmitters adapted to the process speed
- Board and packaging — control of consistency and of gases in the stock
- Graphic paper — analysis of charge and drainability at the wet end
- Effluent treatment — polymer dosing based on electric charge
How do we supply BTG Mütek in Romania?
We can quote consistency transmitters, Mütek charge analysers, drainability and gas analysers, brightness transmitters and BTG accessories. We supply them to order; the lead time is usually 1–4 weeks and, for instruments configured for the process, it can be longer. For a correct quotation, send the model from the nameplate, the type of stock, the consistency range, the pipe diameter and material, the working pressure and the output signal. The exact lead time is confirmed in the quotation.
The consistency range and the material in contact with the process are established from the concrete data of the pipe and the stock, so we confirm the model on the basis of these data.
Frequently asked questions about BTG Mütek
What does BTG Mütek make?
BTG Mütek brings together process instruments for pulp and paper: MEK STRATUS, ACT STRATUS, MBT-2500 and PeakTotal consistency transmitters, Mütek PCD-06, SPC-5500 and SZP-16 charge analysers, drainability, fibre and gas analysers, brightness transmitters and filtrate extractors.
How do I choose a consistency transmitter by range?
For 1–16 % the rotary MEK STRATUS is used, for 1–7 % ACT STRATUS, for 1.5–8 % MBT-2500 with an active blade, and for total consistency, optical, TCT PeakOne (0.01–3 %) or TCR PeakTotal (0.5–16 %). Send us the type of stock, the range and the pipe diameter, and we recommend the model.
Do you supply BTG instruments in Romania, and how fast?
Yes, we supply the instruments to order, usually in 1–4 weeks. A transmitter or a spare part can ship in 24–72 h when the item is in stock, locally or at the supplier. Instruments configured for the process can exceed this interval; we confirm the exact lead time in the quotation.
I have an older BTG transmitter. Can I order a current model?
We check starting from the old model, the consistency range, the mounting flange and the output signal. Any model proposal begins by comparing these data. Send a photo of the nameplate, the mounting drawing and the type of stock, and we establish which current model keeps the connection and the signal.
What data should I send for a quotation on a Mütek charge analyser?
State whether you measure in the laboratory (PCD-06, SZP-16) or online (SPC-5500), the type of sample (process water, filtrate, fibres), the number of sampling points, the distance to the analysis cabinet and the additives used. For SPC-5500 it matters whether the sample is filtered before measurement.
How do I request a BTG Mütek quotation?
Send the BTG Mütek code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: BTG (manufacturer documentation)

