Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Combimac supplier in Romania

For Combimac we quote centrifugal fans with direct or indirect drive, ATEX fans for zone 2, biogas fans, custom versions and special electric motors; we need the flow rate, the pressure and the working conditions.

Headquarters: Emmen, Netherlands

Request a quote

Who is Combimac and what does it make?

Combimac designs and makes two product groups, special electric motors and fans, at Emmen, in the Netherlands. The fans are centrifugal, with direct or indirect drive, custom-built, in ATEX versions and for biogas. They are offered for low, medium and high pressure, and for high temperatures, for example in industrial ovens and drying ovens, most direct-drive fans have suitable versions; temperatures reach up to 800 °C.

Direct-drive fans are made of cast iron, aluminium or welded steel, and also exist as material-handling fans. On the indirect-drive ones, made of cast iron or welded steel, the speed can be changed through the V-belt drive, without a variable frequency drive, which can give a higher flow rate and pressure at the same fan size. Custom versions use cast iron, cast aluminium, stainless steel, steel sheet, non-ferrous metals or special materials.

ATEX fans comply with Directive 2014/34/EU and ISO 80079-36/37 and are suitable for zone 2; for gas-tight versions a pressure test certificate is supplied, together with the declaration of conformity, the manual and the type certificate of the motor. Special motors include dry versions, with brake, low-magnetism or shock-resistant, and wet versions, permanent magnet, oil-cooled or water-cooled and submersible, for pumps, compressors, radars, thrusters and winches. For a quotation, send the flow rate, the pressure, the temperature and the type of air or gas.

What do we supply from the Combimac range?

ProductDescription
Direct-drive fansCentrifugal fans made of cast iron, aluminium or welded steel, for low, medium and high pressure, plus material-handling fans. For industrial ovens and drying ovens, most have versions for high temperatures.
Indirect-drive fansCentrifugal fans made of cast iron or welded steel, for material handling, with variable speed through a V-belt drive, without a variable frequency drive. They are supplied in an ATEX version for zone 2, according to Directive 2014/34/EU.
Custom, ATEX and biogas fansFans designed for the customer's application, made of cast iron, cast aluminium, stainless steel, steel sheet or non-ferrous metals. The ATEX and biogas versions, suitable for zone 2, follow EN 14986 and ISO 80079-36/37.
Special electric motorsDry versions: with brake, low-magnetism and shock-resistant. Wet versions: permanent magnet, oil-cooled, water-cooled and submersible. Applications in pumps, compressors, radars, thrusters and winches; ATEX versions also exist.

Why Combimac?

  • Direct or indirect drive — choose according to the speed and the space in the installation
  • Variable speed through V-belts on indirect drive — the flow rate and pressure are adjusted without a variable frequency drive
  • Custom versions in cast iron, aluminium, stainless steel or special materials — for aggressive or hot environments, where a standard fan is not suitable
  • ATEX fans for zone 2 and biogas fans — the installation receives the conformity documents together with the fan
  • Special electric motors, from brake versions to submersible ones — the fan and the motor can be quoted from the same technical discussion

Which Combimac codes and series are requested most often?

CodeDescription
Direct driveCentrifugal fans made of cast iron, aluminium or welded steel
Indirect driveFans with V-belt drive, made of cast iron or welded steel
Custom fanVersion designed for the customer's application
ATEX fan for zone 2Version according to Directive 2014/34/EU and ISO 80079-36/37
Biogas fanExplosion-proof centrifugal fan for biogas
Brake motorDry electric motor, with brake
Low-magnetism motorDry electric motor with low magnetism
Shock-resistant motorDry electric motor, shock-resistant
Permanent magnet motorWet electric motor with permanent magnet
Oil-cooled motorWet electric motor, oil-cooled
Wet submersible motorWet electric motor, submersible
Water-cooled motorWet electric motor, water-cooled

Where is Combimac equipment used?

  • Biogas — ATEX fans for gas formed by the decomposition of organic matter
  • Industrial ovens and drying ovens — direct-drive fans for high temperatures
  • Material handling — dedicated fans, made of cast iron or welded steel
  • Explosive atmospheres, zone 2 — indirect-drive and ATEX fans
  • Pumps, compressors and winches — special electric motors

How do we supply Combimac in Romania?

We can quote Combimac centrifugal fans with direct or indirect drive, ATEX and biogas versions and special electric motors. For a correct quotation we need the flow rate and the pressure, the temperature and the nature of the air or gas, the material wanted, the supply voltage and, for ATEX, the classified zone. If you are replacing an existing fan, a photo of the nameplate with the series and the motor data helps us. Supply is to order, usually in 1–4 weeks, and the quotation contains the exact lead time.

Custom fans are built to the application data, so we quote after we receive the flow rate, the pressure and the environmental conditions.

Frequently asked questions about Combimac

What are the permanent magnet motor, the oil-cooled motor and the submersible motor at Combimac?

Combimac makes two product groups at Emmen: centrifugal fans, with direct or indirect drive, custom-built, ATEX and for biogas, and special electric motors, dry or wet, for pumps, compressors, radars, thrusters and winches. The special electric motors include the wet permanent magnet motor, the wet oil-cooled motor and the wet submersible motor.

How do I choose between a direct-drive and an indirect-drive fan?

Direct drive covers low, medium and high pressures, including versions for high temperatures in ovens. Indirect drive allows the speed to be varied through V-belts, without a variable frequency drive. Send the flow rate, the pressure, the temperature and the installation space.

Do you supply Combimac fans in Romania and how fast?

Yes. Supply is to order, usually in 1–4 weeks; it can ship in 24–72 h when the item is in stock, locally or at the supplier. Custom versions and ATEX versions have their own lead times, given in the quotation.

Can I replace an existing Combimac fan with a new one?

Yes, if we have the data of the current fan. Send a photo of the nameplate with the series, the flow rate, the pressure, the speed and the motor data, plus the connection dimensions. For ATEX versions add the classified zone; we check the suitable version and confirm in the quotation.

What data do you need for a quotation on an ATEX or biogas fan?

Send the classified zone, the nature of the gas, the flow rate and the pressure, the temperature and the supply voltage. Combimac ATEX versions are suitable for zone 2, according to Directive 2014/34/EU, with a declaration of conformity, a manual and the type certificate of the motor.

How do I request a Combimac quotation?

Send the Combimac code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: COMBIMAC B.V. (manufacturer documentation)