DELO supplier in Romania
For DELO we offer adhesives from the PHOTOBOND, KATIOBOND, DUALBOND, MONOPOX and DUOPOX families, DELOLUX curing lamps and dispensing valves; for a quotation we need the materials to be bonded, the curing method and the packaging required.
Founded in 1961 · Headquarters: Windach, Germany
Who is DELO and what does it make?
DELO is a German manufacturer of industrial adhesives, headquartered in Windach, near Munich, and active since 1961. The programme does not stop at the adhesive: the company also develops the dispensing and curing equipment, so the material, the application and the curing are chosen together. The adhesives are used in microelectronics, in the automotive industry, in electric machines, in renewable energy and in general industrial applications, where the adhesive can replace mechanical joints.
The families differ by curing mechanism. DELO PHOTOBOND are light-curing adhesives that cure in a few seconds. DELO KATIOBOND are light-curing cationic epoxies with high adhesion, low shrinkage and chemical and thermal resistance; they can be pre-activated, then cure at room temperature, which helps with opaque components. DELO DUALBOND combines light curing with a second mechanism, which also cures the unlit areas. DELO MONOPOX are heat-curing adhesives, between +60 and +150 °C, based on epoxies, cationic epoxies or acrylates. DELO-DUOPOX are two-component epoxy adhesives, cured at room temperature, from structural adhesives to flexible potting compounds. The functional materials include conductive, shielding, structural, debondable (controlled release) and optical adhesives. For curing, the DELOLUX lamps (series 20, 30 and 50) exist as area lamps and as spot lamps, controlled by the DELOLUX pilot A and S units, each for up to four heads. For application there are pneumatic dispensing valves and volumetric systems.
Such products are relevant for manufacturers of electronic components, electric motors, industrial equipment and assembly lines.
What do we supply from the DELO range?
| Product | Description |
|---|---|
| DELO PHOTOBOND, KATIOBOND and DUALBOND — light curing | PHOTOBOND are adhesives that cure under light in a few seconds. KATIOBOND are cationic epoxies with low shrinkage and chemical and thermal resistance, with pre-activation options. DUALBOND adds a second curing mechanism, for unlit areas and fast fixing. |
| DELO MONOPOX and DELO-DUOPOX — heat curing and two-component | MONOPOX is the programme of heat-curing adhesives between +60 and +150 °C, based on epoxies with anhydrides or amines, cationic epoxies and acrylates. DUOPOX are two-component epoxies, from fast-curing adhesives to flexible potting compounds. |
| Functional materials | Adhesives for electrical conductivity and shielding, for structural bonding in machine building, debondable adhesives that dissolve without damaging the parts, transparent optical materials and black coatings against stray light. |
| DELOLUX lamps and dispensing systems | Area and spot curing lamps (DELOLUX 20, 30 and 50), with pilot A and S control units for up to four heads. Pneumatic dispensing valves for non-contact micro-dispensing and volumetric systems for small amounts of adhesive. |
Why DELO?
- Families by curing mechanism — PHOTOBOND and KATIOBOND by light, DUALBOND dual, MONOPOX by heat, DUOPOX two-component
- KATIOBOND with pre-activation — the adhesive stays workable during the working time and then cures at room temperature, for opaque components
- DUALBOND — the second curing mechanism covers the shadow areas, where light does not reach
- MONOPOX with curing temperatures from +60 to +150 °C — from sensitive assemblies to very durable joints
- DELOLUX lamps and dispensing valves from the same programme — the adhesive, the application and the curing match each other
Which DELO codes and series are requested most often?
| Code | Description |
|---|---|
| DELO PHOTOBOND | Light-curing adhesives, in a few seconds |
| DELO KATIOBOND | Light-curing cationic epoxies, pre-activatable |
| DELO DUALBOND | Dual-cure adhesives, by light and an additional mechanism |
| DELO MONOPOX | Heat-curing adhesives, +60…+150 °C |
| DELO-DUOPOX | Two-component epoxies, room-temperature curing |
| DELOLUX 20 | Series of adhesive curing lamps |
| DELOLUX 30 | Series of curing lamps |
| DELOLUX 50 | Series of curing lamps |
| DELOLUX pilot A | Control unit for up to four area lamp heads |
| DELOLUX pilot S | Control unit for up to four spot lamps |
Where is DELO equipment used?
- Electric machines and drivetrains — temperature-resistant adhesives
- Microelectronics and semiconductors — encapsulation, curing and fixing of components
- Automotive industry — autonomous driving, electric drivetrain, lighting and interior
- Renewable energy — solar cells, wind power and fuel cells
- General industrial applications — glass bonding, power tools and resistance to inks and solvents
How do we supply DELO in Romania?
We can offer DELO adhesives, DELOLUX lamps and dispensing components starting from your assembly process. The adhesives, lamps and dispensing components are brought in to order, usually 1–4 weeks; depending on the specification, the lead time may be longer. For a quotation we need the materials to be joined (metal, glass, plastic), the curing method required (light, heat, dual or two-component), the working temperature, the resistance required to media, the cycle time, the packaging and the quantity. For replacements, send the name of the adhesive currently used and the technical data sheet. We confirm the exact lead time in the quotation.
The adhesive and the strength of a joint are confirmed once we have the bonded materials, the curing process and the working conditions, and the shelf life of the adhesives is checked on the delivered batch.
Frequently asked questions about DELO
What does DELO make?
In Germany, DELO makes industrial adhesives with light, heat, dual or two-component curing, functional materials such as conductive, optical and debondable adhesives, DELOLUX curing lamps and dispensing systems. They are used in microelectronics, the automotive industry, electric machines, renewable energy and industrial applications.
How do I choose between PHOTOBOND, KATIOBOND, DUALBOND and MONOPOX?
Start from the process. If light reaches all of the adhesive and the cycle is short, PHOTOBOND or KATIOBOND; if there are shadow areas, DUALBOND; if curing is done in an oven, MONOPOX. Send us the materials, the cycle time and the permitted temperature, and we request confirmation of the family.
Do you supply DELO adhesives in Romania, and how fast?
DELO adhesives are brought in to order, usually 1–4 weeks, and depending on the specification the lead time may be longer. A product can ship in 24–72 h when the item is in stock, locally or at the supplier; we confirm the exact date in the quotation, including the packaging and the transport conditions.
Can I replace an adhesive used on my line with a DELO product?
It can be checked case by case. Send us the name of the current adhesive and the technical data sheet, the bonded materials, the curing method, the working temperature and the media the joint is exposed to. We ask the manufacturer to suggest a reference and recommend tests before moving to production.
What data should I send for a quotation on curing lamps?
Specify the type of adhesive and the curing wavelength, the illuminated area, the intensity required, the cycle time, the distance between the lamp and the part, the number of lamps and whether you want a pilot A or S control unit. If you have an existing system, send its model.
How do I request a DELO quotation?
Send the DELO code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: DELO Industrial Adhesives (manufacturer documentation)

