Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Ferrotec supplier in Romania

Ferrofluidic seals, vacuum components and Peltier modules

Founded in 1980

Request a quote

Who is Ferrotec and what does it make?

Ferrotec is a technology group founded in 1980 on the basis of Ferrofluid magnetic liquid and Ferrofluidic® seals. The group has operating centres in North America, Europe, Japan, China and Singapore and production units in the USA, Germany, Japan and China; its American subsidiary, Ferrotec (USA) Corporation, is based in Livermore, California. For an industrial buyer, the relevant part is vacuum technology: ferrofluidic rotary seals, components for vacuum deposition processes (evaporation sources, sputtering sources, substrate heaters, throttle valves) and electron beam evaporation systems under the Temescal brand.

The principle of ferrofluidic seals is simple and robust: a liquid ring, held in place by a magnetic field, hermetically closes the clearance between a rotating shaft and the housing, and so transmits rotary motion into vacuum without contact friction. They are used in etching and deposition equipment for semiconductors, flat panels, LED and solar cells, in wafer transfer robots and in other rotary mechanisms under vacuum. Alongside them there are thermoelectric modules (Peltier coolers), thermistors, advanced ceramics, fabricated quartz components, CVD SiC and process chillers.

In Romania, requests come from manufacturers of equipment with a vacuum chamber, laboratories and workshops that maintain existing deposition installations, where a rotary seal, a sputtering source or an electron gun has to be replaced. For such a request, what matters is the exact code of the part, the type of mounting (for example Temescal or central mounting), the rotation speed and the process gases.

What do we supply from the Ferrotec range?

ProductDescription
Ferrofluidic® seals and vacuum feedthroughsRotary seals that use Ferrofluid as a liquid ring around the shaft. They come in various sizes, with process connections, integrated motors or several planes of motion, for etching, deposition and wafer transfer equipment.
MeiVac componentsEvaporation sources, sputtering sources, substrate heaters and throttle valves for thin film deposition installations, plus the AQUA-LOK cryopump for water vapour in the vacuum chamber.
Electron guns and Temescal systemsElectron guns with Temescal or central mounting, high-voltage sources and controllers, as well as evaporation systems from bell-jar types, for universities and laboratories, up to high-capacity production lines.
Thermoelectric modules and chillersPeltier coolers for heat pumping, thermal cycling and precise temperature control, plus process chillers for industrial, food and medical applications, which use compression or the thermoelectric effect as the primary source of cooling.

Why Ferrotec?

  • Ferrofluidic rotary seals in vacuum — they transmit rotation into the vacuum chamber through a magnetic liquid ring, without contact friction
  • Components for vacuum deposition — evaporation and sputtering sources, substrate heaters and MeiVac throttle valves
  • Electron guns in two configurations — conventional Temescal mounting and integrated central mounting, with power supplies and controllers
  • AQUA-LOK cryopump — water cryopump from the MeiVac range, for water vapour in the vacuum chamber
  • Production in four countries — USA, Germany, Japan and China, with regional operating centres

Which Ferrotec codes and series are requested most often?

CodeDescription
Ferrofluidic sealsFerrofluidic rotary seals for shafts in vacuum
FerrofluidsMagnetic fluids and superparamagnetic nanoparticles
MeiVac componentsEvaporation and sputtering sources, substrate heaters, throttle valves
MeiVac systemsThin film deposition systems
AQUA-LOKWater cryopump, from the MeiVac range
E-beam componentsElectron guns, power supplies and controllers
Temescal systemsElectron beam evaporation systems
Thermoelectric modulesPeltier coolers (TEC) and thermal management assemblies
ThermistorsThermistors with advanced ceramics and electrode technology
ChillersCompression or thermoelectric process chillers
CVD SiCComponents made of silicon carbide deposited by chemical vapour deposition

Where is Ferrotec equipment used?

  • Semiconductors — rotary seals for etching and deposition chambers
  • Flat panels and LED — rotary mechanisms under vacuum, layer deposition
  • Solar cells — process equipment with transmission under vacuum
  • Research and laboratories — electron beam evaporation systems
  • Thermoelectrics and process cooling — Peltier modules and chillers

How do we supply Ferrotec in Romania?

We can handle requests for Ferrotec products from the vacuum and thermoelectric line, especially spare parts for existing installations. Supply is to order, usually in 1–4 weeks for standard items, and for configured parts or for deposition systems the lead time can be longer; the exact lead time appears in the quotation. For a correct quotation send us the make and model of the equipment on which the part works, the code on the label, the dimensions of the shaft or of the flange, the rotation speed, the type of process gas and the working temperature.

Whether an older item is still in production is checked on request, and its compatibility with equipment from another builder is checked on the basis of the drawing or the dimensions.

Frequently asked questions about Ferrotec

What products does Ferrotec make?

Ferrotec, founded in 1980 on the basis of Ferrofluid and Ferrofluidic® seals, makes rotary seals for vacuum, vacuum deposition components (MeiVac), electron guns and Temescal systems, thermoelectric modules, thermistors, advanced ceramics, quartz and silicon carbide components, plus process chillers.

How does a ferrofluidic seal work and when is it chosen?

A ring of ferrofluid, held by a magnetic field around the shaft, hermetically closes the passage between atmosphere and vacuum without solid contact. It is chosen when rotary motion is transmitted into a vacuum chamber. Send us the shaft diameter, the speed, the process gases and the mounting flange.

Can you supply Ferrotec products in Romania and in what time?

Yes. They are supplied to order; standard parts usually arrive in 1–4 weeks, while configured ones or whole systems may exceed this interval. The quotation states the exact lead time, after the part and the target equipment are checked.

Can I replace an old seal or sputtering source?

It can be evaluated on the basis of the code on the part, the equipment on which it works and the mounting dimensions. Equivalence is established from these, not from appearance. Send the make and model of the installation, a photo of the part and, if you have it, the sketch with its dimensions.

What details should I give for a quotation for an electron gun or a Peltier module?

For an electron gun: the type of mounting (conventional or central), the power and the power supply used. For a Peltier module: the dimensions, the current and maximum voltage, the temperature difference required and the working environment.

How do I request a Ferrotec quotation?

Send the Ferrotec code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 22 November 2026 · Sources: Ferrotec (manufacturer documentation)