Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

SPECS Surface Nano Analysis supplier in Romania

For SPECS Surface Nano Analysis we quote PHOIBOS and AEOLOS analysers, EFM/EBE evaporators, ErLEED components, the Carving manipulator and modules from the ProvenX and FlexMod series, based on the analysis method and the chamber flanges.

Headquarters: Berlin, Germany

Request a quote

Who is SPECS Surface Nano Analysis and what does it make?

SPECS Surface Nano Analysis is a German manufacturer headquartered in central Berlin, which develops and makes surface analysis systems in ultra-high vacuum (UHV), standard or customised, for surface science, materials science and nanotechnology. Besides complete systems, the company also sells components: electron analysers, X-ray, UV, ion and electron sources, cryogenic manipulators and deposition modules.

Spectroscopy covers XPS (photoelectrons excited by X-rays), UPS, Auger spectroscopy and ARPES. The ProvenX series brings together the standard systems, FlexMod is the modular family of analysis and preparation systems, and the NAP-XPS systems work at pressures of up to 100 mbar, for operando investigations. There are also HAXPES systems for bulk analysis, SEM/SAM systems for small-spot chemical mapping and ARPES and Spin-PES systems. The PHOIBOS and AEOLOS hemispherical analysers serve multi-method analysis, ASTRAIOS is intended for high-resolution ARPES, and NanoESCA and ToF MARIS cover imaging. The SpecsLab Prodigy software automatically controls the analysers and the UHV components, from sample handling to data acquisition. For preparation, SPECS offers EFM/EBE electron beam evaporators, ErLEED and the six-axis Carving manipulator, cooled with liquid helium.

Such systems go into research laboratories, institutes and advanced materials development centres, either as complete installations or as modules added to an existing vacuum system. The quotation starts from the analysis method, the type of samples, the vacuum level and the interfaces on the existing chamber.

What do we supply from the SPECS Surface Nano Analysis range?

ProductDescription
ProvenX and FlexMod — surface analysis systemsProvenX is the series of standard systems, and FlexMod the modular family of analysis and preparation systems. Both can be extended with analysers, sources, preparation chambers and, where needed, deposition modules, for XPS, UPS, AES or ARPES.
NAP-XPS and HAXPESNAP-XPS systems allow operando investigations at pressures of up to 100 mbar, while HAXPES systems, with hard X-rays, analyse the bulk. They are used for surface reactions, liquids, gases and interfaces with solids.
PHOIBOS, AEOLOS, ASTRAIOS, NanoESCA and ToF MARIS analysersPHOIBOS and AEOLOS are hemispherical analysers for multi-method analysis, ASTRAIOS is for high-resolution ARPES, and NanoESCA and ToF MARIS bring imaging and spectroscopy. The core of any SPECS system is the electron analyser.
EFM/EBE, ErLEED, Carving and SpecsLab ProdigyEFM/EBE are electron beam evaporators for clean surfaces, ErLEED explores reciprocal space, Carving is a six-axis manipulator cooled with liquid helium for ARPES, and SpecsLab Prodigy is the control software.

Why SPECS Surface Nano Analysis?

  • Standard and modular systems — ProvenX for established configurations and FlexMod for modules combined to suit the experiment
  • NAP-XPS up to 100 mbar — operando investigations of surface reactions, liquids and gases
  • PHOIBOS and AEOLOS hemispherical analysers — the core of the systems, with ASTRAIOS for high-resolution ARPES
  • Multi-method integration — analysis, preparation and deposition (MBE, PVD, PLD) in the same vacuum system, with distribution chambers
  • Unified SpecsLab Prodigy software — automatic control of the analysers and UHV components, for reproducible experiments

Which SPECS Surface Nano Analysis codes and series are requested most often?

CodeDescription
ProvenXSeries of standard surface analysis systems
FlexModModular family of analysis and preparation systems
PHOIBOSHemispherical electron analyser
AEOLOSHemispherical electron analyser
ASTRAIOSElectron analyser for high-resolution ARPES
NanoESCAAnalyser with imaging and spectroscopy
ToF MARISTime-of-flight analyser for imaging and spectroscopy
SpecsLab ProdigyControl and data acquisition software
EFM/EBEElectron beam evaporators for UHV
ErLEEDLEED system for exploring reciprocal space
CarvingSix-axis manipulator, cooled with liquid helium
LEEM/PEEMLow-energy electron microscope and photoemission electron microscope

Where is SPECS Surface Nano Analysis equipment used?

  • Surface science research — XPS, UPS, AES and ARPES in UHV
  • Catalysts and surface reactions — NAP-XPS at pressures of up to 100 mbar
  • Advanced materials and nanotechnology — SPM, LEEM and PEEM
  • Thin film growth — MBE, PVD and PLD in multi-method systems
  • Institutes and universities — ProvenX and FlexMod systems for laboratories

How do we supply SPECS Surface Nano Analysis in Romania?

SPECS appears in our offer through electron analysers, X-ray and UV sources, EFM/EBE evaporators, ErLEED components, cryogenic manipulators and modules for UHV systems, supplied to order. The usual lead time is 1–4 weeks; for complete systems or special configurations, depending on the specification, the duration can increase considerably. Send the analysis method (XPS, ARPES, NAP-XPS), the type of samples, the vacuum level, the flanges on the existing chamber, the code or series of the component and, for replacements, the nameplate data of the old module.

A complete analysis system is configured from the description of the method, the samples and the interfaces of the vacuum chamber.

Frequently asked questions about SPECS Surface Nano Analysis

What does SPECS Surface Nano Analysis make?

SPECS makes UHV surface analysis systems: XPS, UPS, Auger, ARPES, NAP-XPS and HAXPES, plus LEEM, PEEM and SPM microscopy, preparation and deposition modules, electron analysers and sources. The headquarters is in Berlin, Germany, and the company has been building instruments for research for about 40 years.

How do I choose between a ProvenX and a FlexMod system?

ProvenX is the series of standard systems, with established configurations, while FlexMod allows analysis and preparation modules to be combined to suit the needs of the experiment. Tell us the methods, the samples and the vacuum level, so that we can check what suits your laboratory.

Can you supply SPECS components in Romania, and within what time?

Components are supplied to order, usually in 1–4 weeks, and parts can ship in 24–72 h when the item is in stock, locally or at the supplier. Complete systems often have a longer lead time, stated in the quotation.

Can a new SPECS analyser be fitted to an existing system?

The model of the analyser or source, the mounting flange, the electrical interfaces and the version of the control software matter. Compatibility is confirmed case by case; with the nameplate and a photo of the installation, we find out from the supplier whether the current version suits your system.

What data do I need to send for an EFM/EBE evaporator quotation?

Send the material to be evaporated, its form (wire, rod or crucible), the flux and temperature required, the CF flange type, the distance to the sample and the controller available. From this data we establish the suitable EFM or EBE version and the controller needed.

How do I request a SPECS Surface Nano Analysis quotation?

Send the SPECS Surface Nano Analysis code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: SPECS Surface Nano Analysis GmbH (manufacturer documentation)